Graco ST airless pump inspection

[@gkakoullis1973]

Hello,great video very helpful,I’ve just bought the same unit as a project, but I’m struggling to find any info on how to set it up,any idea where I could find some. Thanks G

[@Mcfly665]

Very helpful thank you.

[@deniztolu30]

Thanks for your share

[@carloscardona7585]

Where can I buy a pump for a st pro 395 spray machine from the Antiguas, thank you

[@DammitJr]

I just got that same unit. Could you assist me with more info on setting the lever for priming and spaying? Thanks in advanced.

[@westsprayairless8763]

Hi Oscar, the lever doesn't have an adjustment it's a bolt on product. When assembling the valve make sure the hole is facing up, then place your plastic base, put your handle in the spray position, then line up and push in your pin.

[@DammitJr]

@@westsprayairless8763 Ok so I'm new to this, painting with sprayer. Beside the power switch I have a handle with an arrow, what is that handle for? It Has 3 setting.

[@westsprayairless8763]

The handle is used to change from Priming the paint to spraying, when you first start you point it down, this allows the machine to prime the pump and remove any air in the system, once the paint is coming through you switch it to the side and the pressure should now go to the spray gun.

[@DammitJr]

@@westsprayairless8763 Thank you very much for your help and assistance.

[@xaguilar1417]

What the replace part number for the pump

[@ramiroherrejon4132]

Hi, I just runed in to your video and I have the exact same problem someone fixed for me ones and only lasted one working day, Now I know what I need a full pump, Do you mind sharing the part # of the full pump so I can get a new one. Thanks in advance

[@westsprayairless8763]

495 ST is #246426, 495 ST Pro is #235699

[@ramiroherrejon4132]

@@westsprayairless8763 thank you very much!

[@bryanthunders2046]

Can you make a video on repacking these Graco ST pro models?

[@westsprayairless8763]

Certainly, but I'll have to wait for one to come in, there's not many left

[@xaguilar1417]

what replacement pump did you end up using can you provide the part number please

[@westsprayairless8763]

packings are 18B260 Piston rod if needed is 243174, complete pump is 243183

[@twentyfoursyc]

Is there any particular paint brands you would recommend for exterior use? Not much info about what gets used in Aus

[@westsprayairless8763]

All the major manufacturers have very good paint, but by far one of the best available in Aus is Resene paints, the quality is reflected in their higher prices. The others are Dulux, wattyl, Taubmans, Haymes, Berger etc, just ensure you use exterior paint for exteriors as they have a UV protection within the paint