Gradient leaf cane - polymer clay tutorial 629

Following a request about posting a tutorial similar to the "extruder canes" tutorial (it can be found here • 3D Extruder canes - po... ) but for someone who doesn't have or cannot use an extruder, here comes this pretty "leaf" cane and three different patterns you can make with it!
If you just discovered my channel, don't forget to like, subscribe and share with your friends!
I make these free tutorials to encourage people to discover their inner artist, and to grow and develop their innate abilities to create beauty.
Please check the playlists tab on my channel page, as I have organized my videos in a way that would make it easier for you to find what you are looking for. With over 600 videos to date it can be quite challenging to look for something. Also, check my website, where I have more information neatly organized.
Check the community tab on my channel page as well, I post updates there all the time.
I buy my Premo, Fimo and Pardo clays and many other supplies from PolyClay Play.
polyclayplay.com/?aff=2
If you have any questions, suggestions or requests, either post here on my channel under the "community" tab or contact me through my website or Facebook page.
My website: www.kalyanadesign.com
My facebook page: / kalyanadesigntutorials
My Pinterest page: / kalyanadesign
My blog: kalyanadesign.blogspot.com/
You can find out how you can support me to make more tutorials and keeping my channel ad-free, here: www.kalyanadesign.com/index.p...
Disclaimer: this video description and possibly some narration in the video contain affiliate links. If you click them and purchase something, I will get a small percentage revenue. As I explained above, it helps me with the costs needed to make these free tutorials. But, unless specially indicated in the video/video description, I do not specifically promote those products over others, and usually I give alternatives and most of the time I give alternatives.
Notice of copyright:
Please feel free to use the design/technique presented in this video for your own personal use or for making various items to sell. That is what tutorials are for, after all.
Mentioning of the author is desired and appreciated, but not mandatory.
Different than other artists, I will tell you: do exactly what I do in the tutorial, until you are able to do it exactly how I do it. That means you will have mastered the technique and you will be able to start tweaking it and putting your personal touch to it and grow as an artist.
Just please do not copy the tutorial itself and don't present as yours my techniques. It might not be illegal but it's not ethical.
And remember, I love seeing photos of what you did using my tutorials, and if you send some to me, I will feature them on the Kalyana facebook page!
I use music almost solely from the composers listed below .
Intro: "Hey!" by Benjamin Tissot (www.bensound.com)
Licensed under Creative Commons:
By Attribution 4.0 License
creativecommons.org/licenses/b...
Rest of the video: Music by Kevin MacLeod (incompetech.com) (listed at the end of the video)
Licensed under Creative Commons:
By Attribution 3.0 License
creativecommons.org/licenses/b...

[@srvntlilly]

Omigosh, those are all beautiful, but you lost me halfway through, till you started assembling the three individual canes. Must be my age, lol! 🌹💕

[@KalyanaDesignTutorials]

Thank you!

[@marygoodman2540]

Miss Day this is absolutely gorgeous! Always admire your work! Thank you for sharing your time and talent!

[@KalyanaDesignTutorials]

Thank you!

[@TurtleSoupBeads]

I love this , you did a great job explaining ! 😍tfs

[@KalyanaDesignTutorials]

Thank you!

[@LeMac71654]

Absolutely magnificent as usual!!!

[@KalyanaDesignTutorials]

Thank you!

[@abigailgonzalez74]

Great job‼️Your Leaf came out Sooo Pretty. I Really Love the colors❤️👏🏼👏🏼

[@KalyanaDesignTutorials]

Thank you!

[@catherinemcdowell1688]

I love this an the colors are perfect as always . thank you for sharing.

[@KalyanaDesignTutorials]

Thank you!

[@donnaleelittle9664]

I really like this cane and all the wonderful different patterns you did. I will have to watch it more then once or find a way to slow it down, a little fast for me at times, lol. Thank you so much for sharing your wonderful teaching and tutorial. I really look forward to making this one. 🥰🥰❤️❤️🥰🥰

[@KalyanaDesignTutorials]

Thank you! If it is too fast for you, use the little gear at the bottom right of the screen to play the video at lower speed.

[@donnaleelittle9664]

Thank you Kalyan’s! I never new I could do that!,😂😂😂

[@KalyanaDesignTutorials]

You can, and you can also activate close captioning, that will help tremendously if you watch the video on slow speed, as of course the sound will be slowed down. So you can just click on the CC button, then go slow down the speed the video is played at, and then mute the sound. You'll also be able to pause so you can read the transcript at your leisure.

[@jone6635]

Magnificent! 👏🏻👏🏻👏🏻👏🏻

[@KalyanaDesignTutorials]

Thank you!

[@parakeetsparakeets3972]

Very pretty!

[@KalyanaDesignTutorials]

Thank you!

[@robinfeliciano9787]

Wow! 💕💙💞💜💖💙💗💞💖💕

[@KalyanaDesignTutorials]

Thank you!

[@sharonrobinson2936]

Wow love this 🥰

[@KalyanaDesignTutorials]

Thank you!

[@angelamash6729]

I just used my extruder for the first time today... wow it's a very uncomfortable machine... thank you for this! Beautiful tutorial. A lot of hard handi work went into it!

[@KalyanaDesignTutorials]

You got a Walnut Hollow extruder didn't you? The Makins ones work like a charm, even me with my bad hands I can breeze with it

[@angelamash6729]

@@KalyanaDesignTutorials I did... had a coupon, lol. I'll end up getting the Makins one and the drill attachment in the very short future. Or I'll just set my teens to work.. they thought it was fun ;)

[@KalyanaDesignTutorials]

Yea, I had a Walnut Hollow, needed to get the "gripper" from the kitchen to make it work. With the Makins it's a breeze, I did get the drill attachment but never had to use it.

[@elainesutherland6903]

you might try a drop of silicone oil or armorall on the o ring inside the barrel. That seems to be where the friction is worst. I did that and now I have no trouble with my walnut hollow. It stopped squeaking too!

[@KalyanaDesignTutorials]

Elaine, it doesn't help. The Walnut Hollow extruded are just a bad design. The handle design is also awful

[@chrystalyenger7356]

❤❤❤

[@cecilecharial8555]

J'adore! Merci day!

[@leetzannaroyalla9068]

Awesome! Just awesome!

[@KalyanaDesignTutorials]

Thank you!

[@deanablythe9394]

Wow! Day that is beautiful, you are so clever, thanks for sharing

[@KalyanaDesignTutorials]

Thank you, Deana!

[@rosannasbandi2490]

Ciao cara è meravigliosa questa cane ..impossibile da fare x me..👏👏👏👏👏👌👌👌...sei sempre la migliore👍👍👍.....grazie mille a presto👍👍😄😄👌💋💋❤🙋‍♀️

[@KalyanaDesignTutorials]

Grazie, Rosanna!

[@bean6371]

I love your cane work. You always choose such pretty colors and they end up looking amazing every time. I suppose that comes with a lot of practice though.

[@KalyanaDesignTutorials]

Thank you! Yes, practice and the type of clay chosen

[@batya7]

How lovely! You make it look so easy. Please explain why you added yellow to the Skinner blend. Not sure why you didnt like the original Skinner blend.

[@KalyanaDesignTutorials]

Thank you! I wouldn't really be able to explain. It just didn't feel right. Needed more warmth and definition.