Actually you did it the hard way. There is 3 bolts to take the whole assembly out. One by the radio side and two from the hole where the instrument cluster was. Once you get it out you can remove it from the bracket.
@TERRORoftheLORD3 жыл бұрын
Why did you replace the switch? What was the car doing exactly.
@mrbreezeet14 жыл бұрын
How does the Cable come out of the back of the switch, I have to replace the whole switch, as the key won't turn. we took the switch apart, but the fellow helping me said he couldn't get the cable out of the switch. I also have the cable disconnected at the shifter. Do I need to remove the new lock cylinder from the new switch before I can get the cable back in?
@traylinmartin71352 жыл бұрын
I don't have. A key and the old ignition switch won't come out and I can't release the old ignition I have no key to the car but I have a new ignition switch with the key! Please help ASAP
@rudyalvarado50587 жыл бұрын
how to remove the covers for a 98 Pontiac Grand am to install a new ignition switch already remove the top cover but the bottom cover doesn't want to come off remove 3 screws having problems taking it off so I can get to the ignition switch
@bessemer-tech55797 жыл бұрын
Rudy Alvarado hello,each vehicle is slightly different,but sometimes the plastic tabs are holding.try gently pulling it apart...thanks
@rudyalvarado50587 жыл бұрын
+bessemer- tech thank you for responding back will try my best to take it apart looking at some videos I know one of those will help me out a lot thanks again