New JK BMS and SCREEN any good? Burton Builds

All-in-one Perfect BMS?? Active balancing, Bluetooth APP, Display screen, Charge and Discharge control, built-in protections... this JK Battery Management System (BMS) seems to have it all. In the video we look briefly at what you get int he box, discuss some of the specs and features, look through the app and how to connect to the JL BMS, what information is displayed on the screen and a whole lot more.
If you want to read other reviews or buy a JK BMS, here is an option 👉 amzn.to/3VLNLuz (make sure to select the correct model that you need)
Not sure how good these BMS's are but they also seem to be popular:
Daly 4S BMS amzn.to/3LdR3Bo
Daly 16S BMS amzn.to/3ThpvgJ
I bought my BMS from lithium-cells.co.za/ in South Africa
My Other Socials 😁 👉 linktr.ee/grantburton
=============================
💰💰💰 Patreon & Pay Pal 💰💰💰
=============================
If you wish to support the channel monetarily, please use the links below:
Patreon - / grantburton
Pay Pal - paypal.me/grantburtonbuilds
Any support will be much appreciated.
=============================
✅✅✅ 2023 GEAR ✅✅✅
📷 Camera - Sony A6400 amzn.to/2ErIC5s
🔭 Lens - Sony 18 - 105mm f/4 G OSS amzn.to/3hWwqri
🔭 Lens: Sigma 16mm f/1.4 amzn.to/2ZZeS7J
🔭 Lens: Sigma 30mm f/1.4 amzn.to/2HJcWd7
🎙 Mic: RODE NTG5 amzn.to/361R4nx
🎙 Microphone - RODE Wireless GO II amzn.to/2YZ9PX0
🎙 Microphone - RODE Video Mic Pro+ amzn.to/3jsk7o7
🎧 Audio Recorder: Zoom F6 amzn.to/2HeVGwb
💻 MacBook Pro 16 inch amzn.to/2GlCMTU
🎧 Headphones: BeyerDynamic DT770 Pro (80 Ohm) amzn.to/33kurc9
Soundtracks from Epidemic Sound (Referral link below)
www.epidemicsound.com/referra...
Please help support the channel by purchasing through my Amazon Affiliate links above. When you do, I earn a small commission which helps keep the channel going and you don't pay anything extra.
#bms #BurtonBuilds #offgrid @EELBATTERY-Miya
Burton Builds
S06E03

[@orobella.weddings]

Nice video Grant. Been busy with a few builds myself and wiring up some lithium cells is the next project on the burner 😅. Great info

[@GrantBurton]

Thanks very much. Are you also thinking about using the JK BMS? or something else in mind?

[@joselito7776]

Thanks for showing the screens available for the bms and for talking about the push button used for turning on the bms. These Chinese BMS-es are notorious for the difficulty of finding out about information like that. I figured out how turn mine on w/o the switch by watching the Offgrid Garage channel and would love to find out how to DIY an off the shelf switch. What I found weird was how non-commital you were about whether you thought the BMS was good or not, like as if you didnt really use it and was afraid of saying so.

[@GrantBurton]

Hi Joselito, thanks for your comment. Andy from @OffGridGarageAustralia has some good information and a great channel. At the time of making the video, I had only been using the BMS for a short while so wasn’t comfortable with giving my opinion on whether it’s good or bad because it wouldn’t have been an accurate opinion. Some time has gone by since making the video, about 9 months, and both units have been functioning perfectly well, although I don’t pull maximum current through them. Max I have been drawing is around 50 - 60A through each BMS so they not running at full capacity. I’m still happy with my purchase.

[@CaptBill69]

Think my newish JK BMS for 48 v LiFePO4 setup, w 200 amp / 2 amp active balancing abilities ... is best yet for my needs. Like the 4.3" LCD screen option. Got the smaller LCD for a JK BMS on a 12 v LiFePO4 set trolling motor box. Wonder if anyone know if the little LCD is waterproof, or at least water resistant???

[@bonnetalexandre2085]

Hello thank you for your video! Does it need a cable to communicate with the hybrid inverter ? alex.

[@GrantBurton]

Hi Alex, it does have CAN and RS485 comm ports (if you buy the correct model with the CAN port activated). I haven't connected it before but from what I've seen others do, communication is possible to some inverters. I think it's probably best to check out these websites and and try make your way from there. off-grid-garage.com/bms-communication/ and diysolarforum.com/threads/jk-bms-can-bus-comms-now-possible-for-inverters-that-support-goodwe-and-pylontech-batteries.48963/page-13 The info here will be much more accurate than what I will be able to provide. Hope this helps.

[@larsltj]

Grant, about the scratches on the small screen. It is probable a layer of plastic film there that you have to rip off 😊

[@GrantBurton]

Hi Lars, that’s the first think I checked… and on both screens, there was no protective film to be removed. Thanks for the comment 👍😊

[@larsltj]

​@@GrantBurtonsometimes they are hard to notice (very thin). Try peeling one of the corners gently again. I'm pretty sure JK wouldn't let those pass brand new.

[@GrantBurton]

​@@larsltj Hi Lars, I'm going to have to admit I was wrong... and after reading your second comment, I went and had another look, and didn't pick gently at the corner... actually picked really hard at the corner and guess what, the corner started lifting, so I continued to pull.... and what did I pull off? a piece of protective film. To my defence, when originally recording the video, and before including the section about the screen, I checked both screens and picked at them expecting to find protective film and after picking at them to the point where I though "If I pick any harder, it feels like I'll damage the screen", I concluded there wasn't any protective film. It reminded me of the first Samsung Galaxy Fold, where if you lifted the corner and 'peeled off the protective film', you ended up actually peeling off the top layer of the screen. Even after seeing the video, the store where I got the screen didn't mention anything about there being screen protector that needed to be removed. I guess at the end of the day it's a win 😁👍 for everybody. Thanks for bringing this up.

[@larsltj]

​@@GrantBurtongreat, if screens looks really scratchy like this, it's almost always because of protective film. I even drove my Tesla for several months before finding protective film that should have been removed from the side cameras. 😅

[@GrantBurton]

At least you found it... and I'm sure the cameras have changed from potato vision to HD... haha.

[@KoiAquaponics]

When you have a bunch of these same BMS built into a large set of packs, is there a way to rename them in the app so you know which is which?

[@GrantBurton]

Hi, yes you can the name of each BMS to a name of your choice.

[@ziganagode]

Hi, thanks for the vid. i started the screen but it shouts down after few s is there a way to keep it runing since its for a cart=? the setings for screen in bt dont seem to do anything.

[@GrantBurton]

HI, I've also noticed the setting for the screen turning off / on after a certain time don't work all the time. I'm not sure how to correct this... if you find out how to fix this, please post it in a comment here.

[@gandalf4933]

I’d love to know what you connecting these to and the bigger picture - Solar backup? Camping?

[@GrantBurton]

Hi Steven, a bit of 'both' I suppose... messing around with a mobile power trolley / inverter setup idea for now.

[@Cre8ionz.]

Is the mini color display using the same plug as the on off power button (with a light ring) ?

[@GrantBurton]

Hi, Yes... it's plugged into the same socket on the BMS.

[@farside87]

Yes, JK is near the top for DIY battery management. JK has a variety of their BMSes that will handle 4S configurations to 25S, this one is for a 8-20S configuration. Wouldn't it be great if they came out with ONE BMS that could handle 4-25S configurations? Then a DIYer could actually experiment with a wider range of options without having to buy multiple different BMSes. Of course, there would still be the option to buy a BMS to suit your amperage needs or balancing characteristics that you desired. But, imagine ONE BMS to accommodate a wider range of cells.

[@GrantBurton]

Hi Farside, thanks for your comment. I think for the DIY'ers wanting to experiment, that would be nice, but I also think most people doing DIY builds are building a 'once off' setup (or at least something in the 8s or 16s configuration) so choosing the correct model of BMS would likely suite their needs perfectly. I may be wrong though... haha. As you said though, I actually wanted to experiment (just for a short while) with a 4s pack and would have to buy an additional BMS just for a temporary 4s configuration... in which case a 4s - 20s BMS would be nice... haha.

[@mrtechie6810]

@@GrantBurton My Ant BMS won't turn on, and I am looking for a 200A(?) BMS for a 48V Lithium Ion for a 3000W inverter. Which BMS do you recommend?

[@flopackrc5452]

Grant I noticed the screen and on/off switch go into the same plug . Can you turn off bms with the screen

[@GrantBurton]

Yes, the BMS can be turned on and off using the switch on the side of the screen.

[@juancar2568]

hola , me puedes hacer un favor, se me corto el cable en la ficha de empalme redonda ( la que une el LCD con el BMS ) y ahora no se el orden de los cables, puedes decirme que orden de colocación llevan. Gracias

[@juancar2568]

solucionado, pude abrir el LCD y mirar los colores, gracias de todas formas

[@user-md9qg3wu9n]

where you get the 2.5 inch display screen from?

[@GrantBurton]

Hi Shon, I bought the screen from www.lithium-cells.co.za (online store in South Africa).

[@larsltj]

I recently built a 14s 48v battery with the JK 200A BMS. As I have built a couple of batteries with Daly BMS earlier, I did most of the build on autopilot, but it didn't work! After reading the manual I found out that the last balancing cable also needed to be connected and everything went smooth from there 😅

[@GrantBurton]

How are those Daly BMS's working for you? They seem to be quite popular (more popular than the JK) but the JK seems like a better BMS. Are you using your batteries in a mobile setup or 'off-grid' style backup for the house?

[@larsltj]

@@GrantBurton I could use it for backup if needed in the house, but my main purpose is for electric outboard motors. The 48v 170AH battery weighs in at 41.7kg with the water proof case and should have 8.8KWH energy on board. It will serve a 6.5KW engine on my tender. My first battery build was created from used NMC batteries of a wrecked Mitsubishi Outlander a few years ago. The battery was used for trolling motor, had a simple Daly BMS and have served me well. I also recently built a new 14.8v battery with new cells for trolling motor with Daly BMS. Both Daly and JK have worked well for me so far. Using 14.8v nominal effect on 12v motors may affect the lifespan of the engine as they run on 133%, but I haven't noticed anything yet. I've also used Lifepo4 batteries, but NMC are lighter and more powerful. The chemistry is more aggressive if something goes wrong, but should be safe when operated within specs. ☺️

[@seniorgolfer888]

Do you know how the GPS port on the BMS works?

[@GrantBurton]

Unfortunately I don’t know how it works.

[@Cre8ionz.]

Question 🙋🏻 P- is for Power minus out and also for charge minus in ?!

[@GrantBurton]

Hi, Yes, B- is connected the the negative terminal of the battery and P- is connected to your inverter / charger.

[@Cre8ionz.]

@@GrantBurton but P (minus) is also the negative / GNB output ?

[@GrantBurton]

P (minus) is the negative output.

[@GreekSIMRACING]

Does JK BMS communicate with growatts SPF 5000es?

[@GrantBurton]

Hi, I think it is possible using a program called Solar Assistant (hope I remembered the name correctly) which runs on a Raspberry Pi. If memory serves correct, you’ll have to use a JK BMS RS485 module (small black box) connected to a RS485 USB adapter, then connected to the Pi. I haven’t actually used this software so can’t comment on how well or if it will work, only remember reading about it a couple months ago, but I’m sure a quick google search will yield some results. Let us know what you find?

[@GreekSIMRACING]

@@GrantBurton i quick search your recommendation and the software costs 54€ requires raspberry pi ,but i haven't seen anything.I will search more

[@pr5991]

How can it be connected to wifi? as Bluetooth range is too low. thanks

[@GrantBurton]

Hi, it can't connect to wifi directly... it would need to be connected to an inverter / Solar Assistant via CAN or RS485 ports (if you buy the correct model with the CAN port activated). I haven't done this myself but I believe it's possible however you wont be able to access the BMS settings like you would normally do in the app when connected via bluetooth.

[@Bokul112]

Hi everyone Eve LF105ah brand new cell made by 12v pack need to Balance machine or jk bms is enough?

[@GrantBurton]

Hi, if they are new EVE cells, then the internal active balancer on the JK should be enough… if you are worried about balancing, it might be a good idea to get the BMS with the 2A active balancer.

[@MrSummitville]

@Bokul - Connect them in parallel and do a proper top balance before using them.

[@Bokul112]

@@MrSummitville parallel cell then jk bms balancing is enough dear friend?

[@Bokul112]

@@GrantBurton that type you have any video for idea

[@basiceducation1131]

Jk application for car Android player....?

[@GrantBurton]

I'm not 100% sure but I don't think it will work correctly. Maybe it could be side-loaded but I guess it won't work properly.

[@ivanssatria]

5:48 can i reset the password? Because i forget it

[@GrantBurton]

Hi, I'm not 100% sure but I think you have to contact the seller you purchased the BMS from and they should be able to give you a reset code that needs to be used within a short amount of time after receiving the code (around 20 - 30mins).

[@tanproduction4936]

Bms có thể kết nối CAN bus với invetr

[@markusfranze9241]

JKBMS factory does not give garantee. I buyed 2 JKBMS from factory, at one the display gets dark after 9 Month. the factory requested a video from the dark display. Instead to send me a spare, the answer to the video was only "Great", what a stupid answer. Ofter my new request of the garantee, the factory answers, i can buy a new one. So beware to buy these product and try Open Source instead.

[@GrantBurton]

Hi Markus, thanks very much for your comment. A few people said that some of the small screens burn out if they are left on all of the time, and I think the 'always on' setting has been disabled in the app because of this. Hopefully you can find another screen that works for you.... if you do, please let us know.

[@markusfranze9241]

JKBMS factory does not give garantee

[@GrantBurton]

Hi Markus, thanks very much for the info.