Top 3 channel on the Tubes for this guy. Never miss an episode. Using period correct tools is outstanding.
@gabrielsturdevant9700 Жыл бұрын
really cool to see you guys doing this in an old service station, with old tools, and old benches, and old parts, just unparalleled
@TheCrackerBox Жыл бұрын
Thanks for another , Brothers !!
@abeld.4008 Жыл бұрын
I beg to differ on the tools. I was disappointed to see them use a modern LED light while cleaning out the fuel tank. I would of thought they would use a period correct Whale oil lamp. 😅 What’s next….a Dyson?
@bbrut3332 Жыл бұрын
It's amazing the number NOS parts your viewers have squirrelled away and they generously send to you to keep the amazing old relics functioning as they were intended. Just love your collection of old early 1900s tools. Greeting from East Texas.
@bbrut3332 Жыл бұрын
@@agomodern not very many. Those that are made are not original equipment. Most parts are made in China these days.
@waynespyker5731 Жыл бұрын
A club member cleaned the scale from his '30 Ford coupe a Saturday afternoon by figure eight rotating in his driveway using small round pebbles for media. Sitting on lawn chairs he on one end and his dad on the other. To save evening back pain I suggest bungie cording the tank to a cement mixer changing angles occasionally.
@Chr.U.Cas1622 Жыл бұрын
Dear @@waynespyker5731 👍👌👏 That's definitely a good, common and easy way to do it. At least if you mean a concrete respectively mortar mixer (because cement is only one ingredient of the concrete/mortar recipe). ;-) 😁 A good friend of mine once used a windshield wiper motor with a wooden plate on it. Onto this he strapped the tractor tank. This simple DIY device ran very well and much quieter than a concrete mixer. He used old rusty screws as abrasive cleaning material. Afterwards the inside of the tank and the screws had been really clean and rust free. Best regards, luck and health in particular.
@TheTubeTube2 Жыл бұрын
It’s such a joy to watch Strong’s Garage at work - you really do have the right tools, not a mole grip in sight tightening a spark plug. It’s super to see that many generous folk are donating rare gems to your period workshop. I feel sure that your underwear is correct too!
@macho4x4warlock98 Жыл бұрын
17:14; one step that would be recommended is the lube the distributor point cam lobes with a drop of silicon or light grease. It gives the points contact rub block some longevity.
@edwardperryman5515 Жыл бұрын
This is AWESOME 😊I LOVE NEW CLICK AND CLACK SHOW
@brentschmitt3338 Жыл бұрын
Close as it comes.
@kevinjohnson8758 Жыл бұрын
The brilliant use of the "handyman's secret weapon" makes me wish for more Red Green in the world.
@edmonk4912 Жыл бұрын
Wow, that ol girl should be at the Reynolds Museum in Wetaskiwin. Love this show
@timothysmith5769 Жыл бұрын
Two-tone green...just in time for St. Patrick's Day!
@randydillman4698 Жыл бұрын
Someone that uses books today is such a refreshing aspect of this show. No cell phone needed here! Love it!
@johna1160 Жыл бұрын
Geezer car guy here. Until watching this episode, I never knew that AC stood for Albert Champion. And I didn't know Champion plugs was anything more than a catchy brand name. Zim tool is cool.
@pdrphil8159 Жыл бұрын
Good one fella's.. I like details about tools of old & how they fixed them... That boring machine that you used on Scotts rod bearings was cool... Amazing that lead was used ...Goes to show how simple cars were compared to today.
@barrykochverts4149 Жыл бұрын
Where can you go for a dab of old car resto sunshine? Strong's garage! Cold War Motors is the Yang to your Ying, unkempt, obsessive and full of dark humor and darts; Strong's is bursting with cheer, order and color. Fans can explore all sides of our "hobby" without putting down our phones. Then, there's Carter-- the Rasputin of bodyshop geniuses... Long live Kanadian Kar Kulture!
@derekbowbrick6233 Жыл бұрын
When your old gas gauge goes out you throw a couple of rocks in your fuel tank, and ever bump is a different ring in you tank letting you know the level of your gas.
@certified68crazy3 Жыл бұрын
My Father who was born in 1921 told me his first car was a 1928 Chevrolet that he paid $ 125.00 for. Doesn't sound like a whole lot but then again he was making a $ 1.25 a day plus his lunch logging with a team of horses. I can only imagine.
@thestreets5206 Жыл бұрын
What a lovely original car . Top blokes 👍👍👍
@deanbrunner261 Жыл бұрын
I can smell the old gas all the way from Memphis. thanks for the memory
@stephenkrzanowski Жыл бұрын
What a sweet ol' Chevy. Nice touch with the vintage correct tuneup parts.
@sheldondyck8631 Жыл бұрын
What’s the thinking behind iodine on the spark plugs? Never heard of that before.
@ifga16 Жыл бұрын
While removing the valve cover, you came up with a great title for a KZbin show. "Two Simple Nuts." Lots o fun to see your work.
@johnelliott7375 Жыл бұрын
I worked with my great uncle at his tire shop for 25 years and everytime it snowed we had to put the chains on all the postal wagons. Great day to you all.
@johnwoodrich8179 Жыл бұрын
Watching old cars drive in the snow is a very fine thing and you guys just raised the bar on that.
@heyartbailey Жыл бұрын
Plugs hanging on by a couple threads, hand tight, huge gaps, two gaskets, six different spark plug makes...don't drink and tune-up, kids. Hadn't thought about the dozen or so tire chains hanging up in my grandparent's old garage in years! Identical to yours, with crusty, old leather straps. Super enjoyable episode, guys! Thanks for letting us hang out.
@christianmccollum1028 Жыл бұрын
What a beautiful ol' Chevy. Congrats on 12k subscribers and cheers to many, many more. Love the channel, guys. 👍
@madaro504 Жыл бұрын
best tools on the Tube.... no wait that came out wrong....
@edwardperryman5515 Жыл бұрын
I own a 1951 CHEVROLET DELUXE with the same 6 cylinder
@goodkarmechanic Жыл бұрын
Love seeing the old girl getting some love and coming back to life! Well Done.
@SuperSportstudio Жыл бұрын
👍 ✌Nice period correct tune up, no need for pushin gloves
@p.d.nickthielen6600 Жыл бұрын
You guys are doing great love the show
@CarterAutoRestyling Жыл бұрын
That old Chevy sure cleaned up nice, it was great seeing it out playing in the snow! I also appreciated the vacuum hose modification trick. It will be a real time saver the next time I'm doing my seasonal gas tank vacuuming.
@steveshoemaker6347 Жыл бұрын
Thanks guy's i am in my 80's and i really straight 6's 👍 Shoe🇺🇸
@brianbethel9929 Жыл бұрын
Matt, Jim, love the show. Nice long video and so informative and fun to watch! That Chevrolet is a runner and a looker. Great show. Until next time, cheers from Wisconsin
@danielulz1640 Жыл бұрын
Actually, that was fun! Great seeing you bring the old Chevy back to life. What was with the rocks in the gas tank?
@garymccord4277 Жыл бұрын
I do not have any old parts to send you Guys But I truly want to thank those viewers that have and will send their old stash of parts to you all to get to live a life that they were built for. Great video Jim and Matt keep up the good work.
@wesleypulkka7447 Жыл бұрын
Matt + Jim, great video as usual! One comment though I hope you put a dab of grease on the distributor points cam. Otherwise that new point arm will quickly wear down. All the best!
@thomas5714 Жыл бұрын
The wave from Matt in the rumble seat - classic. Currier & Ives classic.
@dougkiss7630 Жыл бұрын
So much fun and loved the tire chains and the ride in the rumble seat
@brianmaynard7320 Жыл бұрын
Hello Jim and Matt!! CWM sent me over here to watch the fun!! GREAT show!!
@alxf66 Жыл бұрын
It's always a pleasure to peek into your shop!
@mikewatson4967 Жыл бұрын
I love watching you guys do all this work the old fashioned way. I E the right way.
@lyndatomlins3448 Жыл бұрын
Another great one guys.! The old Chev sounds good but looking forward to the Model A coupe. Cheers from NZ. -Wayne.
@MAC-ws8fz Жыл бұрын
I'm waiting to see a Studebaker!
@markbehr88 Жыл бұрын
Great old Chev.
@scottnyc6572 Жыл бұрын
You should have a giveaway of the old new stock boxes the spark plugs came in.
@johnpowell5433 Жыл бұрын
I'm certainly up for that although I think the empties should be used for display. Made me wince when the flap came off the Filco box. Nice, collectible box. I have a few NOS spark plugs in a case on my wall.
@johnelliott7375 Жыл бұрын
Good morning and great day to you all and enjoy your Sunday.
@mitchherriot853 Жыл бұрын
Cool Chev Boys!
@MartsGarage Жыл бұрын
Thanks lads, that was great! All the best, Mart in England.
@davidmcginnis2075 Жыл бұрын
I'm be watching when you first started both exceptional mechanics, good job Matt & Jim.
@davidmcginnis2075 Жыл бұрын
Crazy I commented on mr. Carter, how does my, comment end up on your show? is this some weird Canadian conspiracy?
@dannmarceau Жыл бұрын
12K... Woohooooo!
@HayWoodsandWetlands Жыл бұрын
Good gracious thats a great car.
@MrButtonpresser Жыл бұрын
I wonder what a tune and service like this would have cost back in the day. Great video guys.
@richardsiddon610 Жыл бұрын
Nicely done guys!😁 Have a great weekend.
@fonhollohan2908 Жыл бұрын
Imagine trying to cross the Rockies during the winter like they did way back yonder on those ole gravel roads. I guess you just wouldn't take such a chance without risking your life. Man those ole pioneers were tough hardy people. When I look at this ole jalopy it just shows how far the automobile has come. Wow You've done a decent job cleaning this ole car up and getting it back on the road with a little bit of Tender loving care. Good Stuff.
@57Banjoman Жыл бұрын
A friend of mine was gifted a beautiful original '31 coupe, and he generously let me drive it last summer-interesting experience-about 45 mph is all out-it must have a really high gear ratio rear end-great video guys-thanks!
@barryuttley1164 Жыл бұрын
Another great video Come on spring!
@bernardreeves5028 Жыл бұрын
You guys hit the spot every time, you always manage to make an old 4 banger 1928 Chevy survivor car owner grin!
@davidsolloway9349 Жыл бұрын
All good ! Keep at it !
@glenharper3136 Жыл бұрын
Thanks for the video Guys, Always a treat.
@jorgefernandez-mv8hu Жыл бұрын
That was great seeing the Chevy running again especially in the snow. It's amazing the collection of tools and equipment you have and use. I haven't seen anyone put on tire chains in a long while. That car is ready to use as a daily.😊
@brianmoore1648 Жыл бұрын
Do you Fellows listen to "Big Band " music while wrenching away ?
@lmoore5264 Жыл бұрын
I really love Matt and Jim on this channel. They get along so well and the content is always top notch. Matt is multi talented. I remember seeing him at Scotts Cold War Motors christmas party playing the guitar. Jim is talented to with many interesting projects including his 1956 Lincoln that Scott is helping him with. I love his personality. I would love to see you guys do a video on just your shop going around to everything and explaining the tools and the layout of Strongs garage.
@davidwildridge8080 Жыл бұрын
Hit the like button! Holding that same ZIM tappet adjuster in my hand wondering when it was used and by whom…thanks for the education guys!
@wlogue Жыл бұрын
Super cool to see Matt back walking on his own, I wrecked my ankle in September in a similar way. Cheers boys!
@billywilmoth3745 Жыл бұрын
My dad's first car was a 31 Chevy coupe with rumble seat he paid 25 dollars for from who turned out to be my grandfather now I have a 30 chevy sedan that was turned into truck during wwll 194 CID 6 cylinder runs good and has 2 3 speed transmission's back to back and wooden spoke 20 inch wheels
@DrewToner Жыл бұрын
Will it run better? Of course!! When your using NOS parts and tools!! Well done gentlemen!!
@RXRSawdustStation Жыл бұрын
Perfectly PURRRfect! Drives like a Dream! Great job, fellas! Thanks for the excellent content!
@johnelliott7375 Жыл бұрын
Don't knock it, for years before this kiddo weather we been having the past 40 years you had to carry them in the car back in the day. Thank you for sharing your work with us.
@MrShene123 Жыл бұрын
It's nice to have easy access to the plugs.
@russdavis1960 Жыл бұрын
Another fine episode!!!
@kensherwood4866 Жыл бұрын
Another engrossing video, who would think that in bringing the Chevy back to the road, you would have NOS parts to fit? Amazing but a joy to see and to have it out in the snow on period snow chains, a bit like being transported back to the time when this car was someone's pride and joy and their daily driver. Fantastic, best wishes guys.
@coldwarmotors Жыл бұрын
Love this little coupe! Nice to see it out on the road... Looking forward to another visit soon fellas... Keep up the great work!
@justian177 Жыл бұрын
Oh yeah. Perfect
@chrispiazza7487 Жыл бұрын
You guys rock!
@joeyleclaire Жыл бұрын
Excellent Red Green reference!
@twentypdrparrott694 Жыл бұрын
I had a cousin who worked with brother in auto repair. Albert had one harm. He lost it in a combine. It took his arm including the shoulder blade off. He could set the points and time a car one handed.
@TheDocrock100 Жыл бұрын
Thanks for sharing another great video. I appreciate your editing very much. You show the mishaps but pass over the tedious valve adjusting. I also appreciate the use of books and proper tools. You guys are the best
@seed_drill7135 Жыл бұрын
My friend’s dad told me when they still lived in India my friend put rocks into the tank of his Studebaker Champion. My friend said he thought it would make it go faster!
@briandepoppe720911 ай бұрын
Can I be friends with you two? Brings back a lot of memories. Great job!
@katarinavomdach Жыл бұрын
This was soooo much fun to watch. More please :)
@rescuedandrestoredgarage Жыл бұрын
Such an incredible car, gentleman. Well done, both of you.
@billdyke9745 Жыл бұрын
A 1931 car with AC? Precocious chap, Johnnie Yankee... 👍
@Mr49Studebaker Жыл бұрын
That is a sweet old rig and has really come around since you guys got it.
@williambostick2795 Жыл бұрын
Man o man you two get to play with some great toys .
@DavidHorsnall Жыл бұрын
Great episode. Thinking best one yet. Keep it goin!
@fritzcaddy Жыл бұрын
Really nice content well done strong bros.
@jiminycricket2230 Жыл бұрын
What a treat you step back in time with you guys. I absolutely love it!! Keep up the great work 👍
@timreed2127 Жыл бұрын
Iodine on spark plugs never heard of that before what does it do?
@SST11B Жыл бұрын
Great episode guys, happy St Patrick's, cheers!
@ratt727 Жыл бұрын
Great tech session, like the old tools and parts that was used.
@philpapizzo6038 Жыл бұрын
What a great project that will be for somebody. Its mostly all there, it runs & actually sounds good. The world needs all the 31 Chevs it can get. On I-75 in Detroit yesterday morning, drove past the Ford Plant on my way back to Canada, was thinking about you guys. It would be like visiting Mecca for Strong's Garage.
@rodneyclark1990 Жыл бұрын
Man that ole chev is sweet
@gerrywood3584 Жыл бұрын
Perfection boy's strong's garage rocks
@kendallsmith1458 Жыл бұрын
One of the many GM factories in Flint MI (back in the day) was the Albert Champion parts plant. "My dad works second shift at AC spark plug."
@SuperMAZ007 Жыл бұрын
What a amazing car. This could easy win a summer beater challenge. Beside how many of these do you see around? I would say almost none. There is a rattling noise that can be heard from the engine while it's in gear. I wonder what it could be?
@mikemullay5622 Жыл бұрын
I have an NOS Filko regulator in my '56 Buick Special. Yup, I am still running the stock ignition, Carter 2 barrel carburetor, and a generator. I do have an electric fuel pump back by the gas tank, to assist the mechanical pump on the engine. It helps with vapor lock which is an issue with the Buick nail head engines on today's gasoline.
@richardaustinaustin1890 Жыл бұрын
As usual, interesting video. Would loved to have seen a bit of a closer look at the valve adjustment tool in operation. Thanks guys
@glennpittman7325 Жыл бұрын
I had friends that had a 31 just like that one but a roadster and looked like a brand new one, and ran so smooth and quiet and had actually bought it from a used car dealer friend that had picked it up at a car auction in the early 60's, I could not tell for sure of any replacements except both frt & rumble seat were vinyl and paint had to be a respray but i never saw any evidence of it. All the bright work was flawless.
@murraymeekel7842 Жыл бұрын
I have a pair of those tire chains hanging in the shed, cool
@robinengland5799 Жыл бұрын
Great video, love to hear those old Chef 6 cylinder engines!
@danielpopps8396 Жыл бұрын
Love the Stormy Kromer....great video guys😎
@TheToolmanTim Жыл бұрын
Just stumbled on this channel and thought it was Bob and Doug McKenzie. Stuck around and decided to subscribe. You should too, hoser.