Gray Goose Gets A Fuel System | Twin Turbo Mustang Foxbody

The Gray Goose gets a fuel system. All braided stainless, AN fittings and Aeromotive regulator. Send me your decals!
KillFab Clothing Co. - www.killfab.com
You can always find me here:
Facebook: thefabforums
Instagram: @thefabforums
Twitter: @thefabforums
SnapChat Username: vossperformance
www.thefabforums.com

[@nicholasweber21]

One of the best channels out right now. Finally an average joe building bad ass stuff. Keep up the great videos !

[@Thefabforums]

+Nicholas Weber thanks man

[@lNetogamerl]

Love your attention to detail even to the parts most people won't see. Can't wait to see the finished project!

[@Thefabforums]

+lNetogamerl Thanks

[@JerniganRacing863]

The Hustle Standard fits perfect man, he is by far my favorite artist right now. Hungry keeps me motivated at welding school. Keep doing badass stuff and raising the bar brother!

[@Thefabforums]

+JerniganRacing863 Thanks man

[@kevinhornbuckle]

The bouncing baby boy is a really nice touch. You can tell he's just chomping at the bit to get out there and help his daddy build stuff.

[@Thefabforums]

+Kevin Hornbuckle so is his daddy...

[@twiztid1fiddy]

That lil guy is blessed.he is goin to learn so much.

[@Thefabforums]

+Greg Singleton lol...daddy gonna put him to work! Thanks

[@paulysimpson6001]

Some people just LOVE TO BITCH ABOUT ANYTHING! DO NOT CHANGE THE CHANNEL BECAUSE ITS HONESTLY A GREAT CHANNEL WITH GOOD INFO AND ONE OF MY FAVORITES . KEEP IT UP KYLE AND DON'T CHANGE FOR ANYONE!!!

[@Thefabforums]

+Pauly Simpson Thanks. I have always been focused on staying true to my self and have no plans of changing who i am.

[@DevanThomponGaming]

HOLY SHIT that hammering the cardboard to mark out the holes. ive been struggling for years trying to figure out how to do that thank you!

[@Thefabforums]

+Pimpasaur no problem...ball point hammers work best

[@patw52pb1]

+The Fab Forums Balls from a ball bearing placed on the paper/card stock struck with a hammer works great too.

[@alexbruce6937]

Man I love everything about you channel. Don't change anything just cause someone doesn't like it. Keep doin what your doin! 👍🏻

[@Thefabforums]

+Alex Bruce thanks dude

[@RecklessRegal]

That's an awesome tip on the hose clamp, braided hose is always such a PITA. If it weren't so heavy I'd use that on my build for sure.

[@Thefabforums]

+RecklessRegal its not heavy. My entire system is probably only a few pounds

[@RecklessRegal]

+The Fab Forums That's still heavy by my standards, but the braided hose I used last was much more than that. What brand are you using?

[@RecklessRegal]

+RecklessRegal I just looked the stuff I used last for a 20 foot roll of -10AN is right around 5-6 pounds depending on where you check. I ended up swapping over to Nylon because it was half the weight. The hose clamp tip would have saved me a ton of time though, the tape method isn't the greatest.

[@whatevericall]

Good stuff mate. I like the song too, but I thought it was never gonna stop.

[@Thefabforums]

+King Reetz thanks

[@cobyd7019]

man I've learned a lot of cool tricks just from watching your videos. awesome channel

[@Thefabforums]

awesome. Thanks for watching

[@masonwright2055]

don"t change a thing man, best build series on youtube

[@Thefabforums]

+Mason Wright thanks

[@prestonvandivier1379]

Hey, love your work and your videos, and i'm old enough to turn down the the volume when i'm not feeling a song. Keep doing you, its what brought me to the channel. Sorry, no stickers. Keep up the work, great stuff as always.

[@Thefabforums]

+Preston Vandivier thanks

[@artmustang]

a tip for cutting braided line just use a sharp chisel against a good peace of steal works amazing

[@beatricethemiata8565]

love your channel. Gives me inspiration to think outside the box with projects!!

[@Thefabforums]

awesome...I did my job

[@NickNackPattysWack]

Nice work man. I love the music and the way you edit the videos. Keep up the good work.

[@Thefabforums]

+Nick House thanks dude

[@bryanmichalski175]

I might steal your regulator placement. All depends how it fits my setup but I really like how you laid it out.

[@Thefabforums]

+Bryan Michalski Im no prob....I like it up there

[@huck01955]

Your car is coming along real nice . Great job

[@Thefabforums]

+huck01955 thanks

[@alazare619]

Hell yea more foxbody love seeing that beast

[@Thefabforums]

+Justin Hernandez cant wait to drive it

[@Foxbodygarage_satx]

Loved the vid, thanks for the shoutout! I'll be doing my fuel system soon, I'm glad you had a few tips! Thanks!!

[@Thefabforums]

+Michael Cura no problem buddy, thanks again for the parts

[@marks7494]

I really enjoy your channel, definitely learning a few things.

[@Thefabforums]

+Mark S sweet. That's my goal

[@robb3111]

Great channel! it keeps me motivated to always see you in your zone too. Also love the music man post in the description in post if possible. Never mind seen it at the end of the video now I know why I liked it I listen to hustle standard for my gym music too.

[@Thefabforums]

awesome

[@IntoTheDirtshop]

Those AN fittings are always worth it in the end, they look so good, I've never done the hose clamp method, done the tape method a few times but it still frays

[@IntoTheDirtshop]

***** definitely, i wonder if using a zip tie if it would have the same results

[@Thefabforums]

+rob320is just want to be careful not to tighten the hose clamp too tight. I use the tape method also....actually did it early in this video

[@Thefabforums]

+Into The Dirtshop It may melt during cutting

[@MrJones-ue2tw]

good stuff man. i know how hard it is working on your projects when you have a little one that needs attention also.

[@Thefabforums]

for sure

[@EricMo556]

I'm a new subscriber. Love the music, love the content even more! Thanks!

[@Thefabforums]

+///Mexicant sweet. Thanks for watching

[@jakeheddinger9467]

Thanks man. By the way the mustang is looking sick. I enjoy watching the channel. I'm about to go to school to learn the same stuff you do. I hope I can get as good as you some day.

[@Thefabforums]

Thanks...work hard and Im sure you will be better than I

[@jakeheddinger9467]

I hope so. lol

[@131_racing]

stumbled on your channel today. Subbed straight up.. And then find out that your in Union so greetings from the burg lol

[@Thefabforums]

+invisible Generation Sweet...thanks for watching

[@MrNinjjja]

great craftsmanship great videos

[@Thefabforums]

+vgamboa84 thanks

[@Boostedlifestyle]

YAY I've been waiting!

[@Thefabforums]

+Boosted Lifestyle lol...glad I didn't disappoint

[@mcilwain67]

Keep doing what you doing man...good job!!!

[@Thefabforums]

+Neil Mcilwain thanks

[@tshannon2086]

new sub, just wanted to say great channel and like your song, never stop who you're!

[@Thefabforums]

+trevor shannon thanks for watching

[@dalesmith2061]

Great job,keep up the good work. Love your channel.

[@Thefabforums]

+Dale Smith thanks

[@scantronsgarage]

Awesome channel !!! Keep up the good work!

[@Thefabforums]

+scantron thanks

[@rustysanchezgarage]

Very enjoyable videos and good music to with thanks from Spain . Keep up the good work

[@Thefabforums]

+Javi reolid thanks

[@Alexskrzypek]

Love your filming, love your work. Definitely the most Casey Neistat-like car channel out there and it's awesome. Where do you get your music by chance

[@Thefabforums]

thanks man...thats a great comment as I a Casey fan. I get my music from everywhere. I buy some it, work with musicians, and the youtube audio library.

[@devinberry1534]

bout damn time the Grey goose comes back!:) now where the video of it running and burnouts?!

[@Thefabforums]

+Devin Berry lol...sooooon

[@albertoaragon2036]

this dude kicks ass and very helpful

[@Thefabforums]

Thanks Alberto

[@ApostleDavids8w]

Sweet I wish I could hang out and tell you about my project.

[@MrTimdtoolman1]

Making progress, lookin good.

[@Thefabforums]

+Tim datoolman thanks

[@Mobil179]

who dislike these video ! it s better than all those top gear high budget crap !!

[@Thefabforums]

+Mobil179 I get people bitchen about stuff all the time

[@coreylamerton5399]

what is this soundtrack sounds awesome? love the work man keep doin wat u doin

[@Thefabforums]

+Corey Lamerton Its The Hustle Standard www.hustlestandard.com/#hustle-standard

[@coreylamerton5399]

Thank you iv got the songs realy inspiring tracks get u pumped to do projects

[@singlespeedman]

Milwaukee has some badass scissors that you might want to check out. I have some that I use doing the same stuff and they work way better than the standard pair I had before.

[@Thefabforums]

+GreaseMonkey Supreme I will take a look

[@AmirTi]

it's me there on the top :D love you even more! ;)

[@Thefabforums]

lol

[@kareemrose-benton2198]

channel is perfect how it is

[@Thefabforums]

+Kareem Rose-Benton thanks

[@kareemrose-benton2198]

NP i live for that fire content!

[@lawrencewilson8466]

Your channel is great man

[@Thefabforums]

+Lawrence Wilson thanks

[@SailingGoonies]

Good stuff right here.

[@Thefabforums]

+DisplayName thanks

[@lowunlimited83]

cool I'll be download them on my SoundCloud

[@Thefabforums]

+young low shoot them a line and tell them I sent ya

[@adamheed4953]

motivation and some handy tips!

[@Thefabforums]

+adam heed glad you dig it

[@MrDavcan]

Keep it coming bud 👍

[@Thefabforums]

+Dave-Jill Nelson thanks

[@bjay191]

Good stuff Mate!

[@Thefabforums]

+bjay191 thanks man

[@steadyslamming]

Congrats on your son.

[@Thefabforums]

+Al Saggese Thanks

[@TmoneyTheUce]

just keep doing you... beast ass channel

[@Thefabforums]

+Ti Ta lol...thanks

[@TmoneyTheUce]

+The Fab Forums yw sir cant wait for the start up of this beast. dope ass build

[@charliespann3967]

More CAD work, cool.

[@circusboy44]

Sweet dude!! are hats available too on kill fab? and was that an engine holding your glass table up that your fuel line was laying on? can't wait to hear her turn over!!!

[@Thefabforums]

+ryan obie hats are coming soon. The table was made with a Harley engine...entire build is on this channel. Thanks

[@Wolfman1974ify]

Just want to say I like your video's and songs. If they don't like your video or song's or how u act they can skip over to another video. Because it's fact u can't please everybody. By the way Merry Christmas and happy new year 2017 to u and your family.

[@Thefabforums]

Merry Christmas

[@Iseekoutthetrails]

My sticker is on the way. cool video.

[@Thefabforums]

+1down4up sweet...thanks

[@Swilling]

Coo mate! it's in the mail!!

[@Thefabforums]

+Swilling sweeet

[@jjs4x]

Build a stand for your chop saw... I should take my own advice! lol

[@Thefabforums]

+jjs4x I actually have one

[@thehammer_7840]

good stuff man keep it up

[@Thefabforums]

+Russell Maillet Thanks

[@Bigtwin88]

Nice work on fuel lines ......Great channel also.....Thanks Don M...

[@Thefabforums]

+Donald Marland thanks

[@lowunlimited83]

love the music...!!!

[@Thefabforums]

+young low everything that @hustlestandard puts out is bad ass. www.hustlestandard.com/#hustle-standard

[@celsoguajardovillarreal]

excelente trabajo . saludos.

[@BADAZZ93STANG]

awesome video!!!!

[@Thefabforums]

+BADAZZ93STANG thanks

[@frankwright3427]

dude love your channel and quality of work got a question I have a 84 iroc turbo ls was wondering if you would do the fuel system and wiring I live in Columbia sc I can bring it to you. I admire the detail you put into your project.

[@Thefabforums]

right on Frank. I dont do any outside work right now....just dont have the time

[@sloppysecondsracing]

Keep it the same this is my favourite channel.

[@sloppysecondsracing]

Also you must have a good wife to let you play in the shop so much.

[@Thefabforums]

+Devin Smith thanks dude

[@Thefabforums]

+Devin Smith She is awesome...she doesn't really care for me being in the shop but she deals with it.

[@sloppysecondsracing]

Same here. right now im building my 351 30 over trying to get my car ready for this years race season. I'm almost done getting all the parts just got my cam in yesterday Lunati Vodoo. I bought her a 94 5.0 and have to put a c4 in so she can race. Thats whats been keeping her quite about me out there. Im thinking of starting to film all this stuff ive been doing. Any pointers on making videos? Its hard im pretty camera shy.

[@HajoTanzmaster]

amazing. respect

[@Thefabforums]

thanks

[@singlespeedman]

Great channel.

[@Thefabforums]

+GreaseMonkey Supreme Thanks

[@raymosworld_8062]

Coming along pretty. I was wanting to know what EFI system are you using. Phil

[@Thefabforums]

Bigstuff3

[@andrewaharvey]

Congrats yo

[@andrewaharvey]

music is tight

[@Thefabforums]

+the real Andrew Harvey Thanks www.hustlestandard.com

[@temprmj1]

Hi, what type of material where you hammering to make the hole impressions? I'm going to try fabricating a bracket for an after market e-brake caliper and use existing holes in the hub from the dust shield.

[@BigIrish89]

Good man you doo you keep it up

[@Thefabforums]

+Drinking Fighting Irishman thanks

[@seatree6883]

cool i like ur work sir haha mustang is my fav. car

[@Thefabforums]

+Seaweed Tree sweet! thanks

[@seatree6883]

+The Fab Forums sir can you make a set for the honda tmx 155 in the philippines it is so popular

[@seatree6883]

set up ishould say

[@Pietrek94L]

+The Fab Forums What ecu are You going to use, Megasquirt, ECUMaster EMU, or Holley? Greetings from Poland, keep it up ;)

[@Thefabforums]

+Auto Fan TV I have used Megasquirt in the past on other projects but on this car I am going to run BigStuff3

[@DEMONFOX5.0]

Are you planning on going to mustang week @ myrtle beach this year.And will you have your mustang ready to take.

[@Thefabforums]

+Michael Evans Probably not this year...may try to go next year

[@Smokkedandslammed]

Hey Mr Fab, you see that new fuel filter that Injector Dynamics is gonna be putting out? Speed Academy did a video on it. It looks pretty top tits

[@Thefabforums]

+Smokkedandslammed I have not but I will take a look

[@Smokkedandslammed]

+The Fab Forums 👍

[@jaybeeps]

Have you ever messed with an hard lines? would be kinda cool to the regulator.

[@Thefabforums]

+Justin Johnson I have in the past and may use some on the bibbster

[@jaybeeps]

+The Fab Forums cool man I'm looking at doing 3an brake lines on my car. what flare tool would you recommend? Thinking about the Eastwood.

[@BoogiEvo]

It feels like is been forever since the last video

[@Thefabforums]

+Derick Lee lol...how long has it been

[@BoogiEvo]

+The Fab Forums almost a month but I am to stoked to see this done!

[@russellcameron9035]

I frikin love that never gonna stop song! Who is it? I'm in Aus and haven't heard them before.

[@dirtridingyouth]

+Russell Cameron It´s The Hustle Standard ft. Jay Kill. They have a channel here on YT.

[@russellcameron9035]

+Konstantin Jusow thank you! How can I use their music on my vids if I wanted to?

[@Thefabforums]

+Russell Cameron Not sure you can. But you can check them out here. www.hustlestandard.com/#hustle-standard

[@richburdick9279]

great work! why are you walking around your hood on the floor?

[@Thefabforums]

thanks

[@seatree6883]

ur music is also good ilike it

[@Thefabforums]

+Seaweed Tree Thanks

[@stevegoodwin9067]

haters gonna hate :-( your channel is excellent!

[@Thefabforums]

+steve goodwin I agree...thanks

[@Chromov113]

Another option for this hoses is the thermal shrink tube, works well too. What is this machine you used to cut the mount of fuel pressure valve? Is it handmade?

[@Thefabforums]

+Andrey Studentsov its a portable band saw in a stand I made

[@Chromov113]

+The Fab Forums Found the video on your channel. Thanks!

[@Thefabforums]

+Andrey Studentsov awesome...let me know how your turns out

[@Chromov113]

+The Fab Forums I don't have this tool... I don't have even an own workshop yet. It's hard to have one, being a foreign student and living in the dormitory, he-he.

[@aussie1926]

What fuel do you plan on running? And injectors. We got black kevlar lines on our drag engine the look mint and don't have to deal with the braid.

[@Thefabforums]

gonna start with 98#ers and will most likely switch back and forth between e85 and pump gas

[@rockycoleman898]

what is the name of this song?

[@alexmoreau8921]

Where do you buy all your line and fittings? I'm in the process of a rebuild on a subaru and want to go back with braided lines and AN fittings.

[@Thefabforums]

+Alex Moreau believe it or not I got all of them on ebay this time

[@ajdrifternerd8291]

had a question I just got out of the army and I'm trying to build a garage what did you study in school and how did you collect all the awesome fab machines trying to get a degree to get certified in fabing

[@Thefabforums]

+Adrian Romero To be honest I didn't study anything in school. Everything I have learned either was self taught or I got from watching others. I did it the hard way.... The equipment was just acquired over time. I just bought what I could when I could afford it.

[@ajdrifternerd8291]

Thanks for the advice I just need to keep watching and be patient with my tools lol

[@Thefabforums]

+Adrian Romero yeah it takes time...hell I am still trying to get what I want

[@wallbash1]

The 2 lines that come out of the back of the rails and come to a y is that the feed that goes to the tank ?

[@Thefabforums]

no thats coming from the tank...once the fuel goes out the front of the rails it goes to the regulator and then returns back to the tank

[@s2d4]

Why not get a proper braided hose cutter? Clean cut everytime.

[@Thefabforums]

lol...whats a proper braided hose cutter?

[@s2d4]

It basically looks like a large wire cutter. Do a quick search on google should give you a good idea, mine was only 40 dollars.

[@Thefabforums]

I have some of those...they are really made to cut large power cable. I will have to try them out

[@6047jacob]

What is that saw that he used at 4:48 I need that in my life

[@Thefabforums]

+meep mop its a porta band that I made a base for so I could use it like a upright band saw. I have video on the entire build

[@lowunlimited83]

cool..I'll do that

[@Thefabforums]

+young low thanks

[@Thorstende]

Hi! Good work! Whats the name of the song at 5:20? Thanks. Greetings from Germany!

[@Thefabforums]

+Thorsten Never Gonna Stop by The Hustle Standard www.hustlestandard.com/#hustle-standard

[@raymosworld_8062]

Hey, brother I like to have a talk with you about fuel systems in general. I'm building a 468 Cleveland with twin 94 mm turbos. I'm going to be running methanol fuel.

[@Thefabforums]

Im probably not your guy as I dont have any experience with methanol other than I know its gonna take a ton of it

[@austinrobertson7067]

I'm new to this Channel so I was wondering what's the blue thing that comes out of the fire wall

[@Thefabforums]

Its a silicone coupling for the induction. The induction comes through the firewall

[@watahyahknow]

who said men cant multitask............ if you are going to do some work on the garage a good idea would be to either add gipson plate and paint the ceiling white or tack sheets of white foil ontoo the beams , it makes the place a lot lighter with the same amount of fluoresent light and sunlight , it prolly will help the camera and retain heat or cold too i realyrealyrealy need to get me one of those portable bandsaws. i only see them here verry rarely cant buy them fro the states as they run on 110 and we have 220 one phase here i wonder if you can supergleu the brading to the rubber before cutting it ..... nice job on the fuelsystem

[@Thefabforums]

+watahyahknow Thanks and I agree in the ceiling. I have thought abut adding something but the problem is we plan to build a new house & shop at some point and dont want to spend a ton of money on this shop.

[@watahyahknow]

nice ! an even bigger shop btw theres black / white foil here static.mijnwebwinkel.nl/winkel/greensell/full29017482.jpg? dunno if they sell it in the states , the official use for it is mainly to cover up seedlings and protect against weeds around tomatoplants and stuff over here people use it in growrooms growing the funny tabaco , it doesnt cost a lot per roll and will look good if you manage to put it on tight (roll edge in some thin cartboard and tack that to the beam so it doesnt rip )

[@altops4490]

any other channels asking for stickers to show off?

[@Bigtwin88]

Hey.... I did not see a fuel gauge on regulator,,,,is it in the cab,

[@Thefabforums]

+Donald Marland no carb...it fuel injected. I will have a gauge, just have not hooked it up yet

[@PRIMALNEEDS]

Who is this loving the song

[@Thefabforums]

+PRIMAL NEEDS The Hustle Standard www.hustlestandard.com/#hustle-standard

[@bryanroupe8646]

Anyone know what the song playing at 5:00 is called ?

[@highprofile_87]

How much power you're planning on making with this setup?

[@Thefabforums]

+ALEXANDER Sherman somewhere around 1200

[@highprofile_87]

Nice

[@chadblixhavn]

you need this tool! Soft jaws for your vice :) ;)

[@Thefabforums]

+Chad Blixhavn yeah...it would help for sure