Gray Scale Fade Rod Wrap Tutorial - Rod wrapping

[@JacklGershkowitz]

I have to say I really look forward to watching your videos. I started building my first fly rod with Project Healing Waters. My third year somehow, I managed to win first place intermediate class. I have been very lucky. I have a friend from our club who is a professional and has helped me so much. The rest of my experience is watching your you-tubes and some others. I did learn something that you probably know but I don't see you do it so here it is. Take a popsicle stick (small pieces to match tape) and put it between the blank and the double face tape (I use masking tape and reverse it after i hold down stick) when you finish you don't have to worry about damaging the blank and no pealing tape off. well keep the videos coming. Jack

[@christophermckinney984]

I’ve had a similar story. Started with PHW, somehow took 3rd in the beginner category on my first rod. Good to see it got you hooked as well. (Pun intended)

[@lukmanullukmanulhakim8560]

Thank you sir,

[@theflipsidevids]

Thank you so much for all your videos! Im new to custom wrapping and i watch your vids the most ! Appreciate all your guidance and wisdom in the craft!

[@FishingLouisiana2020]

I am glad you enjoy them. Thank you for watching.

[@martystephens6929]

Now that is a good looking wrap…i gotta try it!

[@FishingLouisiana2020]

Thank you. I am glad you like it.

[@yusufdavids766]

That wrap is beautiful. Like kinda 3d👍👍👍

[@FishingLouisiana2020]

Thanks for watching

[@LivinMNOutdoors]

Beautiful looking wrap.

[@FishingLouisiana2020]

Thank you! I am glad you like it.

[@christophermckinney984]

Referencing your spacing, you said you’d worked out your maths for size A thread, then used size D. That alone will throw off your spacing. But another thing I caught was that you were thinking you could get 5 D wraps per mm, and unless I’m remembering incorrectly, it’s about 4 to 4.5 wraps of size A thread per mm. So in a wrap we’re the tolerances are so tight, those two things can be enough to really make you run out of room before you planned on it. That said, I think it came together Very Well! It’s not about the mistakes we make, but how we move forward from them. 👍🏻 Good Job 👏🏻

[@lukmanullukmanulhakim8560]

Thank you sir for the tutorial

[@joylind6122]

Thank you.

[@FishingLouisiana2020]

Haha, any time

[@jimk4267]

Very nice. Best wrap explanations. Thanks

[@FishingLouisiana2020]

I am glad you liked it. Thanks for watching

[@lukmanullukmanulhakim8560]

Thank you Mr

[@dayli3ht297]

Definitely gonna be making some nice designs with this

[@FishingLouisiana2020]

Thanks for watching. I have a lot of ideas of wrap video's the future. I might try and make a eagle next, not sure yet.

[@dayli3ht297]

Yeah bro go for it I’ll definitely watch that video

[@2913terry]

That's a great wrap!! 👍

[@FishingLouisiana2020]

Thank you. I am glad you like it.

[@joerobles7703]

that awesome

[@FishingLouisiana2020]

Thank you

[@rogergleason]

Looks great…good job

[@FishingLouisiana2020]

Thanks Roger, I am Glad you like it. It was easy to do too.

[@billyjeffrey1411]

Turn out good I like it

[@FishingLouisiana2020]

thank you. i like this one too.

[@trilokeshrils5493]

Great job 👍

[@FishingLouisiana2020]

I am glad you like it. Thanks for watching.

[@jasonv4946]

Im looking to try this wrap...thanks for the tutorial. I use the taper offset calculations for my rod, but it only gives the 90 and 180. How are you coming up with the other marks between the main points?

[@FishingLouisiana2020]

That is all you need is the 90 and 180.

[@johnnydelgado5459]

Wow!

[@FishingLouisiana2020]

Glad you liked it. Thanks for watching

[@adisuhardi3159]

Incridible,,,, from to Indonesia.

[@FishingLouisiana2020]

Thank you, I am glad you liked it

[@peteruveges1976]

Beautiful wrap, thanks so much for making the video.

[@FishingLouisiana2020]

Thank you for watching. I am glad you like it.

[@joshuawangerin4925]

Dude. Video quality ain’t the best, but I learned more from watching 11 minutes of your video then any other videos on here. I want to learn more. Thank you

[@PSV-in2oh]

Классный рисунок. Титанический труд... Супер

[@FishingLouisiana2020]

Thank you. I am glad you like it.

[@passionforrally5598]

ok bravo

[@FishingLouisiana2020]

Thanks for watching

[@ellismax2380]

Nice wrap...gonna hurt my back on this wrap..haha

[@FishingLouisiana2020]

Haha, I built a 12 ft by 14 ft L shaped work bench. It is at chair height so I can roll a computer chair up and down it.

[@mickeyrheuark3711]

How do u do the ends to clean it up looking forward to more videos

[@FishingLouisiana2020]

I will do a video on this for you. I have talked about it in a few of my videos, but maybe it is time for a video dedicated to just this topic.

[@mickeyrheuark3711]

Yeah thanx just found you today an are watching all your videos great stuff can't wait

[@Maspujakroto78]

Mantab kawan,👍semoga sukses berkarya🙏🤣

[@FishingLouisiana2020]

Terima kasih sudah menonton dan semoga kalian terhibur dengan video-videonya.

[@evanhebert6114]

what is the spacing you used for this wrap?

[@FishingLouisiana2020]

To be honest, I do not remember what it was.

[@jadoemdirtynesselnuts4991]

Hey did you do the lay out video?

[@FishingLouisiana2020]

sorry, I did not. I did not do many layout videos

[@joseangeldelarosajr7310]

What size threat are you using if you dont mind question

[@FishingLouisiana2020]

I do not mind at all. I used size D thread for this wrap. I normally use size D for my wraps and size A for my weaves. Thank for watching and for the question.

[@joseangeldelarosajr7310]

@@FishingLouisiana2020 thank you kind of new to all this

[@FishingLouisiana2020]

@@joseangeldelarosajr7310 Anytime... That is why I do this. I wish more people asked questions.

[@joseangeldelarosajr7310]

@@FishingLouisiana2020 well I'll be hitting you up if I need any help thanx for your time

[@FishingLouisiana2020]

Anytime

[@stevemurphy4217]

I wish you would preface the lesson with your layout measurements. It woukd help a beginner like me. Thanks for all your videos and all the time you have commited to this art!

[@FishingLouisiana2020]

It is hard to give exact measurements because it depends on your rod thickness, but i will do my best to add this info.

[@samhanna9409]

All the sudden I feel like taking a nap 😴

[@FishingLouisiana2020]

Did i bore you?