Great Ideas For Handheld Cutters - Extremely Safe And Easy For Anyone To Do.

Hello everyone! You are watching video "Great Ideas For Handheld Cutters - Extremely Safe And Easy For Anyone To Do."
Discover great ideas for making handheld cutters safe with DIY accessories. Easy and effective, anyone can do it. Maximize protection when cutting rebar and other materials.
I hope you enjoy watching my video!
On Alva Welding Channel, we share: Welding, welding tips and tricks, welding fabrication and techniques, How to weld, DIY, life hacks, weld.com...
Alva Welding is a channel that discusses welding, how to weld thin metals, how to weld square pipes, how to weld round pipes and synthesize good and correct welding techniques. The channel is suitable for everyone, especially beginners.
I hope this channel is helpful and don't forget to subscribe!!
► Subscribe to Alva Welding channel: http:
© Copyright by Alva Welding☞ Do not Reup

[@bsjohan5432]

Amazing! Thanks for the good share and good luck always.

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@diytoptricks]

Great video! Your instructions on creating a safer base for the handheld cutter are very clear and practical. I love how you explain each step in detail. Can you suggest any other modifications to improve the safety of handheld cutters?

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@BarlenSeeveethian-yd2he]

Thank for sharing and amend when needed upon good advice, appreciate your humbleness.

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

[@user-rx6xb3ot3x]

Moro no Estado de Minas Gerais , Brasil . Parabéns ; muito útil!!!!!!

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@antoniodasilvasampaio9366]

Excelente! Muito obrigado e parabéns!

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@juanantoniorojasgranados5027]

Desde Lima-Perú, muchas gracias.. 6:55

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@ahmadaltmimi1313]

روعة جداجدا

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@mrmyorky5634]

Great idea, but anything held by one screw only is likely to move when under pressure.

[@Alvawelding20]

Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day

[@RonnieStanley-tc6vi]

Also, if it gets loose, it will hinge against the bolt and crash the blade. Those little cut-off wheels explode when they break at those RPMs. I use them a lot, but don't think I will be doing hacks like this.

[@Alvawelding20]

@@RonnieStanley-tc6vi Hello. Thank you for your comments, we will consider improvements and fixes to make them more complete

[@user-ub6qg5xm3z]

Hola yo soy de Venezuela y me gusta mucho la herrería

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@elicasey3967]

brilliant idea from ireland

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-rk4nx1dx1l]

Also can keep the cut square on to the material , cool !

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@valdejima]

Muchas gracias por compartir esta buena idea. Un saludo desde la provincia de León (ESPAÑA)

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@jorgeacostamatos2863]

Exelente muchas gracias por compartir su conocimiento para tener más seguridad en eramientas eléctricas tal cómo lo demostró agradesido por esos consejos útiles por seguridad.

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@noildojust1309]

BELEZA, AMIGÃO ADOREI A CRIATIVIDADE.

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@FlorisilviaPires]

Sou de jacobina, parabéns.

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@jorgejavierarriolagareca1357]

oye amigo excelente tu accesorio de seguridad adios genio

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@henrivandewalle2494]

Très bonne idée..beau travail...je me suis abonné pour votre travail...je suis en FRANCE.

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-pe1ic5wt8h]

If you're skilled enough to make that, you don't need that.

[@Alvawelding20]

Thank you for sharing your feedback and expressing your perspective

[@glennlopez6772]

Great idea bro! That clanping jig seems a novel idea!

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@philiplittlejohn1794]

I like it. I use a 6 1/4 skill saw with cut off wheel for sheet goods and a grinder with your attachment for small bar stock is great

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@ssalyvvanna168]

Wow! Very Good! High idea! Gratulation!

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@VahanToroyan-zx4ed]

Thanks ! (Erevan)

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@user-vo4gn8vp6h]

Молодец браво.. Понравилось.. Гений.. 🙏👍

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

[@rubenrcernadas6353]

muy buen video e idea,,,,felicitaciones

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@evapendaki2530]

Many thanks DomIJ

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@elveddavies6822]

great idea and skills , thankyou . NZ

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@pasqualefontana2193]

Ottima idea soprattutto per la sicurezza...saluti dalla Sardegna

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@budipurnomow5906]

bagus, teruslah berkarya, from semarang indonesia.

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@massurya774]

Mantab nih. Bisa ditiru

[@Alvawelding20]

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

[@charlessoll]

Com essa peça acoplada a Esmerilhadeira 😊 vc ainda amola suas BROCAS SEGAS

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

[@fatbelly2438]

on todays episode of dangerous things todo with a grinder

[@Alvawelding20]

Thank you for sharing your feedback and expressing your perspective

[@davethurston753]

Great idea. Thanks for sharing.

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-jd4vj7ib5v]

❤ ممتاز

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@user-ei6np8yj1i]

แบ่งปันไทยแลนด์🇹🇭🥰🥰🥰

[@Alvawelding20]

Welcome to Alva Welding channel! Hope you have a good time while watching the video

[@josecarlosfirmino]

Santa cruz da serra ,obgd pela dica!

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@augustobragaandreu7376]

Muy útil....

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@user-mv8rq7ev1m]

Sızın. Fıkırlerınız. Harıka. Sızı. Sevıyorum

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@JuanAntonioBullo-of2cx]

Muy buena idea😊

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@josealbertocamposcordeiro8447]

Good Idea I am in Brasil, Minas Gerais, Pompeu city. Thanks

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-ud9kf6bo6d]

Great(Thailand)

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@kemtongyansiri1770]

เป็นกำลังใจให้ครับ

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@damien2339]

Great idea for safe cutting. Very nice my friend!

[@paulfrost8952]

Just what I was thinking.

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@user-jm8oe5ct4f]

Ваш друг не правильно режет.уголок режется от края по типу расчёски для волос и только после от вершины.техника безопасности

[@gavinhamilton1100]

I think there’s a reason angle grinder manufacturers don’t fit these to their products, there’s a risk of jamming and disc bursting.

[@user-cp1sh1fr9w]

Me gustó el video soy de formosa Argentina😮.

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@josebeneditocaparros9672]

Ótimo trabalho

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@WeldingWizardd]

Amazing👌

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@mikhailaverkov7074]

Просто в изготовлении, эффективно в применении особенно на профильной трубе, спасибо за идею думаю пригодится.

[@gilsonstallone6591]

👏👏

[@Alvawelding20]

😍😍😍😘😘😘💕💕💕

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-hj4iw3xb2x]

Когда отрезок прутка, длиной менее 5 мм защемит между диском и стенкой паза в этой приспособе - диск разорвет, и машинка превратиться в осколочную гранату ваших руках.

[@dolphinynsen7602]

Türkiye'den teşekkürler... ❤❤❤

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@joseernesto5522]

Sou da area aposentado mas sempre aprendendo parabens.

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@DimitrisGeorgiadis-kq7uq]

Excellent very good job

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@ahmadmeschi5780]

تشکر از ویدیو ایده خوبیه لطفا ادامه بده من از ایران هستم 🙏

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@user-qs5hr8np2l]

สุดยอดครับพี่..

[@Alvawelding20]

Welcome to Alva Welding channel! Hope you have a good time while watching the video

[@elpetiful]

Muy bueno y seguro queda el cote . Un saludo de Montevideo.

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@user-pw1iq9iu5r]

感謝您的智慧創作我來自台灣

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@carlosgeorgeferreiraleal3433]

Eu gostei dessa morça

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@user-nx1dm1uo7h]

Надо было вечером смотреть. А так, посмотрел с утра и надо идти делать такую штуковину.

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@dominiqueberger2119]

Bonne idée un salut de Séte en France

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@victorolivomendoza4261]

Saludos desde México un saludo a la distancia👍 una gran idea👏

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@shokanful]

好方式

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@sergioleongallego1566]

Excelente

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@francesmedona9893]

This is really usefully ❤🎉

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@SSDIY168]

Best cutting machine

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@user-it2pq3om6r]

I'is great video I'm from yemen

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@user-uw3ml2lq9e]

Так! Норм! Можно використовувати!

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@frederickgent1918]

Buy a drop saw and be done with it 😂😂😂

[@Alvawelding20]

Thank you for sharing your feedback and expressing your perspective

[@ZeLemes]

Top

[@Alvawelding20]

Welcome to Alva Welding channel! Hope you have a good time while watching the video

[@obelix6094]

Like the vice made out of sprockets in this video. Anything on how to make one

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@obelix6094]

Still looking for details, not sterile automatic thanks 😡

[@massimilianosaccani]

👍 Parma, Italy

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@jmcruzmacias671]

Exelente información gracias por tu enseñanza saludos desde Huamantla Tlaxcala México

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@luisortegaperez3924]

Saludos desde Temixco morelos

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@nerminsalkanovic128]

Odlično Tuzla BiH

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@user-nv4gn7mn8p]

Υπεροχο

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@user-vx4hp4nz1u]

Nice idea. You could have drilled two smaller holes at the end of the slots and it would have looked more professional. Also put some Hammertone paint! Thanks.

[@Alvawelding20]

Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day

[@shahramvedaei8573]

Bravo bro ... Good job

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@claudioroberto6882]

Boa ! Sou do Brasil

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@Dailyworkkhmer]

good

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your support

[@cesaraugusto9999]

Gostei

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@enzofilho]

Mui bacana o baguiooo

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@fef2me07]

excellent

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@user-jd8rs2xs6n]

I'from🇮🇩✌

[@user-eg4mb3ui8n]

Қазсқстан

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@fahrizalilyas5175]

Ide yang bagus terutama untuk keselamatan kerja,terimakasih.

[@naruto_rhang5]

thk (thailand)

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@user-km9xd7qx5r]

Очень безапасно и красиво и отлично зделена маладес. 👍👍👍😃😃😃

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

[@yolandocarreon7156]

thank you very much friend very usefull. God Bless You. watching here in Phillipines.🇵🇭🇵🇭🇵🇭

[@Alvawelding20]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@neilenriquez8678]

You give me an idea my friend I will do the same jig on my grinder but convert jig into driil bit sharpener

[@thongtran8182]

Tuyệt vời, cảm ơn bạn

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-dn6jy3xh5m]

Rất hữu ích. Bạn nên kèm theo tiếng nói hướng dẫn nhé

[@Alvawelding20]

Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day

[@hectorboyacam.6696]

Bogotá Colombia

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@ZeLemes]

Brasil Uberlandia Estado Minas Gerais Ok

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@user-xx8io6yd9e]

Jambi, Indonesia

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@tanggnern77]

❤

[@Alvawelding20]

😍😍😍😘😘😘💕💕💕

[@user-qc1ww2yk6n]

کارم با سنگ جوشکاری این روش خوب نمیگم بد اماواس نگه داشتن میلگرد سیله هست جای که ابزار نبباش بکار میاد

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

[@joseisraelperez3120]

De bogota COLOMBIA

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@ernestonarcisodeamorim8001]

Muito boa ideia parabéns. Diga-me. Que marca é este disco de corte e onde consigo?

[@Alvawelding20]

Hello. Thank you very much for the nice feedback you gave me. In the video I used Green Hai Duong cut stone. You can order them on Lazara or shopee, TikTok also has them

[@user-bc1qs4oq5q]

Супер,дуже просто і ефективно...я день промучився,роблячи подібну,але набагато складніше приблуду,а тут все так легко... мабуть я тупуватий трішки😂

[@Alvawelding20]

Hello! welcome to Alva Welding channel. I am very happy to read your comment. Wish you have a nice day!

[@tamtai5218]

Great Idea you need to Copyright this before the Manufacturers copy it.

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-pl2ke3ob9z]

من بغداد

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@juanmanuellaguna4878]

La verdad, me parece una excelente idea!!! Gracias por compartir!!!

[@Alvawelding20]

"Hello! Welcome to Alva Welding channel! I am glad you like this ideas. Wishing you all good things! "

[@user-ze8py4yr1x]

РОССИЯ САНКТ-ПЕТЕРБУРГ!❤

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@lenor206]

Cerquilho SP Brasil

[@Alvawelding20]

Welcome to Alva Welding channel! Thanks so much for watching our video. Wish you all the best

[@user-ne2lt7fe8x]

Für ganz ungeschickte mag das hilfreich sein außerdem nehme ich mir die Sicht auf mein Werkstück 😢

[@Alvawelding20]

Welcome to Alva Welding channel! Thank you so much for your comment! have a nice day!

[@surmartinfierro]

Eso es un peligro... Para ser seguro necesita 2 puntos de anclaje

[@Alvawelding20]

Thank you for sharing your feedback and expressing your perspective

[@NguyenDung-qm2nv]

❤❤❤❤

[@Alvawelding20]

😍😍😍😘😘😘💕💕💕