Decent idea from an old tire! It's definitely worth doing!

[@hand_craft]

Hi, how do you like the idea and execution? Rate from 1 to 10

[@jozsefszabolcsjakab1656]

11

[@MildarValsik]

Solid idea. Maybe a tweek or two it goes from 8.5 to 10.5

[@RustamGani-pd9vv]

10

[@jamescohen8545]

10

[@mtiger8]

More than 10 👍

[@masterQ20]

What a great idea, using old tires to create useful products is so smart! This idea is not only creative but also very practical, helping to protect the environment! Really commendable. Great! This idea will definitely inspire many people to recycle old materials effectively.

[@energyshots]

10/10 I watched the entire thing, no skipping forward because I had no idea what the heck it could possible be, it's brilliant!

[@meangreen7389]

You went from an idea to putting that idea into use. It’s the effort that counts and the result was pretty good. Rating: 9

[@meangreen7389]

@@JeffreyRust-oq7rw - Naw, not complicated at all if a person can see the steps and the end result in his or her mind’s eye.

[@artszabo1015]

@@meangreen7389 Nobody said it was complicated - Dork.

[@meangreen7389]

@@artszabo1015 - Your response is laughable Junior. Only a Dufass like you would misinterpret something so simple.

[@meangreen7389]

@@artszabo1015- Obviously you didn’t see the previous comment. Go sit in the corner Junior.

[@meangreen7389]

@@artszabo1015 - Oh come on, back up your dufass comment.

[@andysolution62]

absolutly STUNNING!!! BRAVO

[@joeseda8102]

GREAT idea! You have found a solution for me that I had been trying to solve for some time that helps me organize and use my equipment in my small shop. Thank you GREATLY!

[@RPRosen-ki2fk]

Imaginative solution to a problem. Well executed and it looks useful, I'll give it a solid 8/10.

[@paulnager5270]

That was alright man..! I had no idea where you were going, and I was entertained. I like watching folks work out solutions to problems. I'll give it a 10. Good content...💪

[@QAZ-OMEN]

Ive got about 10 old tires i need more ideas for, keep them coming

[@licksnkicks1166]

10/10 lots of quality work went into this. I can tell by the way you work that your work ethic is superb! ❤

[@artszabo1015]

I would certainly agree.

[@martynm.449]

What a useful thing to have around!

[@LoretoFasciani]

Non ci sono commenti da fare, un genio, complimenti sei un grande. 💪

[@shakaravaz4477]

Ну что тут скажешь? Идея отличная. Я сам уже лет 10 собираюсь соорудить подобное основание для уличного фонаря (чтобы его можно было по мере надобности перемещать). 10 из десяти. 😊 Да, и "балеринка" для вырезания отверстий фрезером у тебя прикольная. Возьму "на вооружение". Классный видос, спасибо! 😊❤

[@SteveMacSticky]

Very good idea and you repurposed old tires which helps to cushion the vibration and also your toes

[@robertmanley7556]

Very nice idea !!! I love it !! Heavy yet... portable...versatile...very cost effective...and its a use for a old tire !! What's not to love!! Very good work !! 👍👍

[@perrygershin3946]

The enjoyment was trying to figure out what it was you were making. I had no idea until the demonstration at the end. It was a very entertaining video.

[@artszabo1015]

Absolutely!

[@michaelwilliams2151]

Mines similar to that, I mounted it on a 24" semi wheel. I love the idea of having wheel on it to roll around, will be adding it to mine. Defiantly a 10+

[@hawikau1654]

Used to see this a lot at gas stations and construction sites back home in Hawaii (without the little wheels) and also in the military.

[@nelson6731]

Boa idéia de "base móvel" para firmar alguns equipamentos! Parabéns!

[@aieeejo]

I recommend heavier duty wheels - those skateboard/luggage wheels will only last for a few roll-arounds before they split. On the bright side, with this design, they will be easy to change as often as you want, and to whatever better alternative you decide on after the first set fails.

[@doughaven-rf8id]

Skip the wheels and use a dolly cart should you need to move it. It would be be more streamlined and seems like a lot of extra time for nothing.

[@chillstar]

@@doughaven-rf8id and how are you going to lift it onto the dolly without breaking your back? The solution in the video seems way better than using a dolly.

[@doughaven-rf8id]

@@chillstar Like a two wheeler dolly, the ones delivery people use to bring cases of soda into a store. WTF were you thinking ?

[@chillstar]

Well, here in England, a dolly is commonly a board with a castor on each corner. What I think you're describing is known as a hand truck or sack truck. But whatever you call it, how can needing to use something else possibly be better than having the ability to move it around built in?

[@aieeejo]

@@chillstar Not just in England, Chillstar. But I believe we're on the precipice of the terms being synonyms here in the US as so many people casually use them interchangeably (like sunroof/moonroof). Whenever my neighbor asks to borrow my dolly, I always bring over a dolly, even though I know he means my hand truck; yeah, I'm being pedantic, but he can end that pretty easily :-D

[@tonybloomfield5635]

Would also make a great shade umbrella stand

[@hallowelt2673]

I can't imagine what this will be. Nice surprise😊

[@jimh2290]

nice idea, what a great base, little heavy but nice

[@randomposts5642]

I was expecting to be disappointed, but I wasn’t! Great idea, and we’ll done! Congrats!

[@advantageous1]

Great idea...I can definitely see one of these in my shop. Thanks!

[@starkotic]

Nothing like dropping a heavy tool on your foot! Good idea.

[@myrachampagne3681]

OK. Now I want to make one also. Awesome video.

[@LectronCircuits]

Excellent way to retire a tire. Cheers!

[@dee-jae9989]

I love that you made something so useful for your use. Excellent

[@beth8095]

Perfection!

[@johngarrod7943]

When you absolutely, positively HAVE to waste an entire day...

[@ianinnes743]

Totally agree with you

[@sustainableliving880]

It is sad that someone thinks this is clever enough to video and share 😢

[@brianm8384]

GET OVER IT. CHILD​@@sustainableliving880

[@diazokc]

Haha. Right

[@possumwerx]

And yet here you are watching it and then commenting on it! 🤦🏻‍♂️

[@joslynandcarltonramsubhag1836]

You are really GOOD! A BIG 10👍

[@Im-a-Fool]

Great idea for mounting a harbor freight tire changer!

[@enoz.j3506]

That wont work,i have changed many motorcycle tyres and the amount of force req is a lot, myn is mounted to my concrete floor,it doesnt move. prob ok for bycicle tyre changing.

[@omarks]

440lb base might be enough, I'll try it. might need to brace against something bigger for leverage when using

[@DennisYoung-xt9sr]

great thinking ahead ! wow! now if I just could afford the equipment to mount? ha!

[@johnbranca6880]

Brilliant. I am going to build one for my vice. My current stand is not sturdy enough .

[@carloscarpinteyro332]

You can't argue with success for a brilliant idea, very inspiring, hope that it will do the same for you, to come up with other brilliant ideas!

[@JanetWilson-h5n]

This video provided exactly what I needed!

[@josemendiola4957]

Excelente video 👌 gracias por compartir

[@LJ-zk9iw]

Sooooo cool! Thank you for the video and your time.

[@Alvawelding20]

I like it, great idea, thank you for sharing

[@mcneill64]

10 for creativity, 10 for complexity, 10 for functionality. A few more iterations needed for practicality.

[@beaverworks1969]

Hi, thank you for doing a great job! I liked this tire idea. I will take note of some points)

[@hand_craft]

Thank you, it's nice to be useful)

[@jeffreybarker4193]

Definitely a 10, excellent job.

[@edalaniz6431]

Geez, that's alot of work just for that !!!!

[@dolphinliam888]

I always forward these to the end first 😂

[@harishwala5882]

Good workshop 😊

[@armando9305]

GRACIAS. MUY INGENIOSO.

[@kerrysmythe4506]

Yes, excellent idea! Great work, inventiveness!

[@MohammedGarmane]

فكره حلوه والي احى هي المعدات الي عندك ..تحياتي لك ..من اليمن

[@Butman28]

That's so awesome!

[@ulluvelez2802]

Not that light to walk away with your tools in a hurry😅 great idea!

[@LanceRudy]

Great video thanks 😊

[@karenheartoriginal3783]

What a great idea…my dad would have loved it, made it and used it a lot! (still miss him RIP) I’m wondering if larger wheels could be used by mounting them more towards the center of the tire?

[@CreationSecret1]

your video is great

[@josenava7948]

Outstanding Achievement!!!! 100% affected!!! I want one how much?

[@barbaramartinez2415]

Very cool.

[@RickyD1968]

Very cool idea !!! Good Job !!!

[@catmomjewett]

Fun to watch. 😊

[@JörgRück-l2y]

Respekt It's a good Man n❤❤😊😊

[@licksnkicks1166]

Brilliant! ❤

[@brianfogle2743]

I had 4 35 inch tires had to get rid of. I cut the side walls off and use them for around base of ornamental grass to keep them from spreading and to keep weeds from growing. Bury them under mulch.

[@PatriciaDiMond]

Great idea

[@DIYmr.T]

useful tool for me, i will definitely make this app in the near future

[@theodorepettinicchi764]

Excellent idea with great execution. Needed to put flat washers on either side of the plastic wheels. Otherwise the steel next to them will chew them up. 9/10.

[@artszabo1015]

I give this young man TEN STARS for this video! 🌟🌟🌟🌟🌟+🌟🌟🌟🌟🌟=10 I have to admit that I was VERY skeptical at first but I watched with an open mind. This is an EXCELLENT solution to a very prevalent problem. Many people struggle with 'walking' band saws, drill presses, grinders etc. This is dangerous!! The weight of the concrete and the rubber works together perfectly to solve this tormenting problem. AND, wait, there's more! It gets rid of a junk tire which is a major global problem!! Art from Ohio

[@yvesmaurice-ln6sb]

Tanks you,gratitude pour votre générosité authentique.❤❤❤❤

[@VictoriaMitchell-ix4ur]

Wow great job., 👏👍

[@MicaelB.Andersson]

First thing that comes in mind, when I see an old tire😅

[@guycolerick7958]

That's hilarious!

[@MASTER3RDEYE]

👍🏻👍🏻👍🏻👍🏻 Great idea.

[@MichaelSmith-hs5iu]

Very Nice, If I was build one, my situation would require bigger wheels for taking the stand out into the rough yard. Oh, if only I had some concrete floors,...lol

[@calvinahrens6988]

My Dad had one of these 60+ years ago ,minus the mini wheels and concrete. Welded 3" pipe to steel wheel .added vise to top.Just lean over and wheel it around to where you want to be . Still using it minus the tire. It burned away from all the welding slag!

[@dorothywigginton1135]

..So smart!....really enjoyed watching!

[@chrisholt2474]

Yep I like this idea. 🍻👍👍

[@meditatingfish]

If it's too heavy, and I saw you working hard to get it moving, use a motorbike tyre. But yes. 10/10.

[@AmyAmy-ob7vi]

Does it come in flat pack?

[@pauletteconstantino9131]

Can I burrow you to do a few things for me. Lol 😂. Only kidding. I lov how your mind works.

[@victorriceroni8455]

That is quite clever. I would be inclined to use a 2" receiver tube to make switching tools quick.

[@grahamoakes3991]

If I had the use for it in my garage, I’d definitely consider making one 👍🏻👍🏻🤔

[@jimthvac100]

Good idea for some things. Other things it is really to wide like for the saw. One would have to stand farther away than ideal to operate it.

[@magastuff6991]

could offset it in the concrete.

[@bltoth1955]

Clamp a 2 foot round bar in the vice and use it for a handle to tow it around.

[@goldsbywashington3509]

Would make a good boat anchor.

[@maverickherman2724]

I just got back whatching the channel KZbin made it where I could not see your stuff for a while I have made stuff for my shop from what I find on this channel

[@JR-c1p]

I just put a very heavy piece of metal underneath my vice and put locking wheels on it must be a way to get rid of old tires

[@hartleyhubbard3827]

excellent job! Hartley [garden grove, CA usa]

[@yvonnechandler7974]

Amazing

[@8th_Decade_Adventures]

Please describe the brands & models of the tools you used. Thanks. Sam

[@Abrak_Ken]

Nice job, please help us by labelling all the things used for next videos

[@Romeo-c9q]

I'm sure drilling that contraption without the tire directly into the floor is just crazy ,😅😅😅😅

[@francoisconjard5074]

Bonjour Superbe réalisation cdt

[@johnt787]

Genius!!!

[@doughaven-rf8id]

Place the tire to the outer edge of the sheet to save some of the wood.

[@patwaldrip3774]

Excellent idea, thank you for sharing it.

[@ЕвгенийДмитриев-я4й]

😂Норм 😂лайк за творчество 😢🎉😂❤

[@MrAllan9]

The tire impeded his standing close to the tool, a nice watch but it's a lot of work for a poor result. The videoing was great.

[@Freebott]

Nice ID 😮

[@davidbertrand6884]

I’m 74 and would never be able to move it after building it. 8/26/2024. 🇺🇸👍🏻

[@kathiehacht9156]

Question? Do you really need the weight for working? It seems to be a lot of overkill. Perhaps adding some pearl lite to counter act all that weight. I get the height think just not all the struggling weight. Good reuse of the tire though. Thank you.

[@robertoferreira_bethopesca127]

Ficou topdlinha 10 👏👏👏👍

[@mbarekdahr1471]

Bonnnnnnnnnnes travallent ❤❤❤ kentunier ❤عمل ررررررراءع

[@agioklima]

Dude i love it!!!!!!! Thank you so much for sharing this ...and it is so beautiful to create something from your mind❤❤❤❤❤😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

[@nbmooselovers]

'Awesome'! 👍