Using a car alternator with a bike to power my home? How much energy can I produce?!

[@greatscottlab]

Part 2 ;-) : kzbin.info/www/bejne/fXnHenqqbMeVr7c

[@patrickarcega9861]

Good day! Try to replace the alternator with the hub motor you used to convert your bike to ebike. Set it up with the controller but unplug the battery then test the voltage it produce in the battery terminal. Take note switch on the ignition. Please give it a shot.

[@jpoe7448]

L@@patrickarcega9861 5th 76

[@patrickarcega9861]

@@jpoe7448 i don't get it.

[@5226-p1e]

Now all you need to do is use that same setup except use water along a stream or something.

[@waterdog9500]

U could actually get a small electric motor and 4-5 more alternators to charge multiple batteries.

[@talkout]

As a child living during a civil war in Sri Lanka in the early 90s, the most common electricity power source we had was by peddling our bicycles that had simple dynamos attached. We couldn’t do much with that, except for powering some FM/SW radios, but nevertheless it was useful for many under that circumstance.

[@greatscottlab]

Thanks for the feedback :-)

[@jeruelvidad901]

@@greatscottlab you can also use the electric bike hub motor as a generator... I'm pretty sure you can generate a pretty good amount of electricity out of it.

[@keithyinger3326]

@@jeruelvidad901 When i was a kid i had a light setup for my bike that included a generator with a knurled wheel that ran along the tire. It had a little rechargeable battery pack so the lights didn't go out when you stopped but when you started pedaling again they sure brightened up.

[@jeruelvidad901]

@@keithyinger3326 yeah, I also have that in my bike when I was in elementary but it only lights up when the wheel moves since it doesn't have a battery.

[@wobblysauce]

Yep, needs to tighten the belt to really get the power out of it.

[@laberkoop]

3:09 "with something like a 6 Puls-Brückenschaltung"

[@segfault-berlin]

6 pulse bridge rectifier for those who can't speak German.

[@gandalf1783]

Das hier ist Gold xDD

[@meedinho1261]

ONLY FULL BRIDGE RECTIFIER GANG

[@JjMn1000]

Hmmm

[@valdisblack1541]

@@segfault-berlin tnx, this Brückenschaltung from video makes me cry

[@OregonDARRYL]

When you have to create electricity manually - you realize just how incredibly cheap electricity really is.

[@electronicengineer]

Underrated comment! Fred

[@autopeep24]

Right humans don't require anything to run, so where does your exhale carbon dioxide come from. Maybe some form of energy metabolism. Thank a farmer!

[@OregonDARRYL]

@@autopeep24 No, you misunderstand. I should have said "...how incredibly cheap electricity is to BUY from the electric company".

[@autopeep24]

@@OregonDARRYL yes, your right. Sorry for the misunderstanding and it was a great academic exercise.

[@netten9432]

Somehow I understood that comment . Lol

[@mrspiffy1981]

As a cyclist, seeing 1440w and the prospect of powering your home with it, almost made me fall off my chair, given that is upper end sprinting output 😂. Love the experiments, keep up the good work!

[@downtube8fs]

This man can do it, he's got cheetah blood

[@bluecollarworktips5586]

What if you play with the gearing? Could you find a ratio that lowers the amount of work required to produce that wattage?

[@niceguy191]

@@bluecollarworktips5586 since wattage is volts x amps, it's sort of a total energy measurement. No matter the gear ratio, that's an insane output from a person for any length of time

[@yashsvidixit7169]

@@downtube8fs cheetah are very poor at stamina, they are good at short bursts of energy.

[@aa9025]

Generator power out is entirely based on the power put into the pedals multiplied by the efficiencies of the generator and the bike/pulley system. My old legs can put out 150 Watts on average for about an hour. Maybe keep a fridge cold or slightly warm up a room. 1440W is a lot, essentially a mid size space heater. @bluecollarworktips5586

[@LeonardGreenpaw]

You need a third wheel on the belt, to hold tension, preferably with a spring, that will assist against slippage and thus increase your maximum output

[@walmartsuxhard]

Came here to say this the belt is flopping about and no where near taught.

[@gregorytrenhed8318]

I like the versions with a charge controller and battery so the bike serves as a back up way to charge your power box

[@Barracuda48082]

@@gregorytrenhed8318 CHARGE is half the key..storage is the other..

[@wobblysauce]

Or set it up as a slide so you can really crank on it while tightening the bolts.

[@walmartsuxhard]

Taut fkin ac

[@GeweerBeer]

"At the back wheel, i had to do some tinkering to get the chain in the highest gear" *puts it in the lowest gear*

[@larsbochristian2]

had he had the chain on the right gear, he would probably have had a little more of the double effect he got

[@trev6783]

I face palmed when I seen this.

[@wanttopreach]

Buy a 250 amp alternator It produces 240 volts if you go around the rectifier. buy a 3/4 horsepower motor 240 volt single phase. hook it up to the the alternator with a belt and spin it up. The alternator will run on 12 amps which leaves 238 amps to run your house. Plenty of power to run your house. Remember, the magnets spinning causes the wires to make power it is not free power. The courts have said you have the right to be independent so it is legal.

[@davemwangi05]

@@wanttopreach of course you're not speaking of something you're doing. cause this can't work. many have tried the perpetual motion machine you're talking about but... not yet.

[@monad_tcp]

@@wanttopreach courts ? I don't need approval of the courts to do anything with my equipment

[@JAYANTHISUDUPIRECIPES]

Hey Scott , you cycle's is in low gear. shift it to the small gear at rear and large gear near the pedal for more rpm and power. PLEASE try it😄

[@charlie_nolan]

But then it will be even harder to pedal

[@JAYANTHISUDUPIRECIPES]

@@charlie_nolan Yes but you can get more power right . It will be a good excercise 😅

[@JAYANTHISUDUPIRECIPES]

@@ethangreenyt yeah I too accept that

[@JAYANTHISUDUPIRECIPES]

@@ethangreenyt Yes but considering that he is on a flat surface and the cycle is elevated from the ground it might be ok. I guess

[@JAYANTHISUDUPIRECIPES]

@@ethangreenyt I guess only Great Scott should find out atleast in the behind the scenes video.

[@KS-45]

Nice experiment! If you put a tensioner on the belt, you will decrease the belt slip and up performance/output. Would have to experiment with the spring force to optimize before too much tension overcomes the optimization of belt slip.

[@dennishein2812]

Yea the belts too loose.

[@DOGEATSGOG]

Forget a belt.. put a chain drive on it..

[@DOGEATSGOG]

Also change the ratio of the pulling gear increased by 3 and reduce the size of the pulley .. that will triple the rpms..

[@DOGEATSGOG]

And add a start run capacitor off of a dc to ac inverter !! It will amaze you !!

[@DOGEATSGOG]

This setup should give you more power than you will need ..

[@mike77tmc2]

Instead of taking apart the alternator, all you had to do was add a battery. Then connect a inverter to the battery. The more power that you draw from the battery, the more the alternator will supply as long as you can maintain a constant rpm.

[@limerind7493]

Could you essentially turn the alternator with a drill that is powered by the alternator which is charging a battery system?

[@Suzukidave]

This involves a loss of Efficiency so even if you started with a fully charged battery it would drain down till flat .

[@mike77tmc2]

@@Suzukidave The battery connected between the alternator and the inverter acts like a reserve. And the alternator needs the battery to start producing current.

[@Suzukidave]

@@mike77tmc2 sorry mike I was trying to reply about useing a drill to power the alt .

[@claudegrayson7039]

yep an auto electritian wired one up for charging batteries at his work but it takes 1 hp to drive an alt and we cant generate that for very long. He had a 1 hp motor attached and it worked well. maybe a smaller gen would work rather than a car one .try a wipermotor

[@Teth47]

An Olympic cyclist is able to generate about 700W for about a minute. It is absolutely wild how much energy we use as a species.

[@raykent3211]

At last a comment that rates human power in watts! Bravo! It struck me as the obvious thing to consider first, but no one does. I'd guess that a person of average fitness might sustain 200W for half an hour. So its daft to fuss about technical efficiency without a ball park figure for the max attainable with ideal 100% conversion.

[@AndrewTSq]

@@raykent3211 I am a average cyclist, and yes we measure our power in watts. I have a crank on my cycle that shows me how much watt i put out. Actually, when some "average" person, that is not superfit nor super non-fit, they usually think its hard to keep 140watts for more than 30minutes. Best i've done is 270watt for an hour. And 270watt for one hour is nothing compared to a Tour de france pro. They probably can do 400watts average for 4 hours. Going from 270w to 400 is HUGE. I can keep 400Watt for a couple of minutes at best, before my legs hurt

[@Sekir80]

@@raykent3211 Some years ago I experimented in the gym with stationary bikes, finding 150W power was acceptable for a longer time (say 30 mins or maybe more), 250W made my heart race quite a bit and was able to keep it up for around 10 mins.

[@adamvalt6609]

@@AndrewTSq hi, what device it is?

[@Teth47]

@@raykent3211 Another interesting fact, to sustain 100W of energy output factoring in the efficiency of human metabolism requires about 60g of glucose per hour, and the Oxygen required to metabolize that glucose represents about 300 maximum capacity breaths based on some back of the envelope estimations of human lung capacity and efficiency at exchanging Oxygen. Sustaining that 100W of energy output also produces about 200W of waste heat. These estimations are almost certainly a bit low, I rounded a couple things up and didn't factor in stuff like self-repair and other necessary metabolic upkeep for simplicity. Incidentally, humans produce about 100W of waste heat at base metabolic rate, not doing anything, that represents around 20G of glucose per hour, and 100 maximum breaths, which is about one breath every 36 seconds. My math checks out okay on that based on myself. Edit: Some math

[@blanana_m]

Great Scott: From time to time, I make mistakes. Electroboom: From time to time, I make something right.

[@Spacekriek]

ROFL !

[@neilbain8736]

This is very useful, and just on the edge of my understanding. I did electrical engineering at college a long long time ago and still get flashbacks to class but can't for the life of me remember what it was all about.

[@radleysmith7528]

They taught you to accept "not to think"

[@neilbain8736]

​@@radleysmith7528 It really was an awfully long time ago. I think I liked Boolean algebra and Karnough maps. There's a strange warm feeling in the memories. When you get to this age you've had so much time you genuinely can't remember, but if you can work it out from first principles again, you're still sharp. I'm saying nothing about Boole, but you'd be amazed how your mind wanders in the queue in Tesco.

[@radleysmith7528]

@@neilbain8736 Don't let them pack your shopping Niel that requires analitics, let them carry it though

[@neilbain8736]

@@radleysmith7528 LOL Bag packers exist but I can do a better job myself.

[@1171karl]

Me too. I was interested in electronics up until then. It was as dull as ditch water, I can remember that much!

[@Farm_fab]

A one wire alternator is your best bet as you only need power in and ground. It requires no separate voltage input to operate, as it's fed by the regulator.

[@jimurrata6785]

It also requires a lot of rpm to _start_ self exciting.... Ford vehicles with the Cologne engine using a 130A 3G alternator you just have to ground the regulator screw to go full field. (But that would probably cause the belt to slip) They do make a good scooter or go-kart motor though.

[@1900OP]

I'm guessing that the exciter coil in a one wire alternator is connected internally in parallel with the output voltage, thus self-excited and very likely also regulated, in this case the regulator might be harder to deal with than with a separate excitation coil. I'm betting a permanent magnet excitation might be better than any other form of excitation in the long term.

[@jimurrata6785]

@@1900OP Maybe a permanent magnet starter motor would be a cheap source for one large enough to actually be useful?

[@Farm_fab]

@@1900OP I had a chrome alternator rebuilt, and it's a one wire system and is obviously powered through the regulator. A pm system is used on some alternators, but both are good in different ways.

[@kwliu001]

@@jimurrata6785 Output voltage too low.

[@w8lvradio]

Just after the war, my Dad a US Merchant Mariner went to a German Dentist. He placed a new filling, using a drill powered by a bicycle. He also observed a vehicle being powered with a combination of coal and wood gas, where the fumes were being directly fed into the carberator. Germans said that while it takes a while to to get it started, it could run a fairly long time, more so if there was more coal in the mix as opposed to wood. They also had a wheelbarrow and hammers, they were collecting bricks from bombed buildings and using them to make new construction. It's always about ingenuity and converting one form of power to another, or in the case of the dentist's drill, just converting motion, and hard WORK with the hands and brain. The filling lasted over thirty years, quite an accomplishment on the part of the Dentist, considering the conditions he was working under. All the Best! DE W8LV BILL Pietschman.

[@michaelwebber968]

Painful?? Lol

[@tylerhusky4065]

That is ingenuity and problem solving at its finest! I think you’ll find this interesting. In the final years of WW2, the remaining Nazi scientists and the engineers were forced to undertake what can only be described as an impossible task for the technology of that era, they created an entirely unique approach to solving the fuel shortages with respect to gasoline, kerosene, and the various chemicals needed to keep their aircrafts flying, their truck wheels spinning, and their tank tracks rolling. With Hitler ensuring that the immediate vicinity of his every location was both armed to the teeth, and had plenty of fuel for escape should whatever battle ensue, this meant that they had to come up with something else, but something no one else would consider possible. Their tireless work led to some of the coolest things the aeronautical field has ever seen to this day in my opinion. Airplanes that utilized wood burning and coal for the needed propulsion, altering the rotary engines of their day in different ways to develop an alternative rotary style steam engine of sorts, using fire wood and coal to fire up the engines and who would’ve thought that those ultra-heavy pile of metals would work as a functional aircraft?!? The Planes did nor have the capabilities of the traditional ones, that goes without saying but they did work! Another innovative last ditch effort to win the war was the Nazi Cold Rocket Engine and another KZbinr named Integza actually did a video on it where he 3D printed one himself. It was pretty freaking cool. I’m with the rest of the world in hating the Nazi’s but I have to give credit to those in which credit is due regarding the field of science, against all odds and some of the most Especially considering scarcity in resources that were crucial to their survival leaving them with no alternative: innovate, or die. I do sometimes that their crazy last ditch efforts of innovation kn particular, the wood and coal aircraft, were is not given the credit that it deserves today (for obvious reasons I will admit). taking science and the field of mechanical engineering right up to the line of impossibility. The scientific achievements those Nazi scientists accomplished at wars end, is nothing short of the ingenious engineering and absolute marvels the world had seen by then. When the Allies had all but destroyed Hitler’s oil production and the other supply lines that the Axis Powers relied upon so heavily near the end, leading him to issue an executive order for the remaining scientists and engineers to develop an alternative means of power as well as alternative methods for producing the thrust needed for aircraft propulsion. I cannot understate just how insanely difficult this task must have been at the time with all the lack of free information, dwindling supply lines for the Axis Powers, and the undoubtedly terrifying amount of pressure placed upon their shoulders to make all of those things happen with such meager materials and available resources at hand. There is a reason that the Brits, the Soviets, and the U.S. wanted to get a hold of as many Nazi Scientists as they possibly could at the time, America was arguably the winner as Operation Paperclip lays out in detail, it was the Russians however that seized most of Hitlers V2 Rockets as well as all of the Experimental “Wunderwaffe” that it could find which I’m sure we will never know the true extent of, but in mg opinion “Die Glokken” was not among them…. Not trying to give kudos to the Nazi’s or anything by bringing this up, just giving credit where credit is due.

[@theeoarsman921]

One of those mountain men shows had a truck that ran on wood fumes. I also remember the Bosnian war where people fixed paddle to generators and strung them across a river on oil drums.

[@Deviated09]

the coal and wood fuel you are referring to is called a gasifier. It's actually extremely effective as a fuel. It's a neat read to look into.

[@roymtz5375]

@@tylerhusky4065 Wood And Coal Burning Would Have Been A Gimmie To Any People In That Situation. There Were Nothing Left For Them To Uses…. By De Facto They Have No Choice…..

[@Mc3ain]

I know this is an old video but I wanted to mention. If you connect the single wire in the socket to the 12 volt output of the alternator you could use a very small battery on a pushbutton to quickly 'excite' the field and start the power production,then it would be self sustaining until you stopped pedaling. This wire is usually connected to the ignition in the vehicle. The other terminal is typically a signal wire for the alternator indicator on your dash to show a charging issue.

[@rodneyfox5566]

It's hooked to the run position on the key not the start position so it receives voltage as long as the the car is running which is y if you disconnect the battery the vehicle stalls older cars with generators instead of alternators you could do what you said

[@caragare3214]

Thank u

[@darrellsomers5427]

You need a generator not an alternator ,alt takes power to make power a gen does not

[@DOGEATSGOG]

@@rodneyfox5566 an alternator is a generator . It runs off the serpentine belt.. it is a true generator.. but for it to run properly it needs an electric load on it or the voltage generated will fluctuate wildly.. a lite bulb works great as a load.. the battery in a car is the load as well as the electrical equipment in the car.

[@DOGEATSGOG]

@@rodneyfox5566 and an alternator produces AC electricity ! It is converted to dc inside the alternator . All generator induction motors produce ac electric.

[@PHamster]

ElectroBoom waiting for “Full Bridge RECTIFIER” GreatScott: **In German**

[@allcrafter3747]

It's not a full bridge rectifier. A full bridge rectifier has 4 Diodes and this one has 6.

[@rarra]

@@allcrafter3747 even fuller bridge rectify yah

[@darkstar2111]

It's called Gretz Bridge in Poland, named after German scientist. I'm wondering if it's used anywhere else too.

[@Barracuda48082]

@@allcrafter3747 full wave bridged rectifier has four diodes, two on each pole..a half wave two diodes, one per pole converting only half a cycle. 👍🏼🤔

[@nanfwangdabiring1520]

@@allcrafter3747 we see six diodes there cos it's rectifying three phase you can't simply use 4 diodes to rectify 3phase

[@rillloudmother]

The professor made one of these in like 10 minutes on Gilligan's Island and that was like 50 years ago... ;-)

[@sebastiannieves5472]

Gilligans island in Puerto Rico?

[@rillloudmother]

@@sebastiannieves5472 lol, no.

[@peterrivney552]

Was that the episode where he made it from bamboo gears and the boat altenater with rope.. ? Or was there a show where they made a wind mill type ?

[@rillloudmother]

@@peterrivney552 I tend to think bamboo and boat alternator. But enlighten me?

[@trailtimeszr250]

@@rillloudmother bamboo bicycle ?

[@umutgungor6094]

If I didn't see it wrong the gears of your bike isn't at highest one which is tge amallest one for back wheel and biggest one for the front one.

[@satriahanifrofi9798]

I think he forgot the gear ratio between his leg and the wheel gear :v

[@sdffsdafdsfsdfsd]

its annoying because scott always half-asses these videos and doesnt do things properly before coming to a conclusion

[@bokkenka]

@@nicomarino96 "He mentioned that the belt slipped...." because there was no tension pulley.

[@satriahanifrofi9798]

@@nicomarino96 maybe glue some card board disk on the side so gotta some more high so it not gonna be slip... 😭Hard english

[@corneliomedrero5164]

You can add pulley tensioner to prevent slippage of your belt. Alternator can be used for any house appliance as alternative source of Electrical power supply...you can use the electrical circuit diagram of Solar panel ( that uses battery, controller and inverter). The bigger the amperage of Car alternator the bigger power capacity you can get.

[@mihai.1302]

So, can work?

[@jk013x]

@@mihai.1302 It would make the slippage less of a problem, but it would also increase resistence, so it would probably work better, but would require more pedal force in general.

[@unicornbbq]

I concur. All of this is accurate. The resistance with a tensioner would be minimal, compared to the added friction, thus, increasing positive motion on the alternator. There is so much slop and wasted energy in this wooden set up it made my teeth itch.

[@craigcarpenter2069]

A ton of the comments that I read, recognized the rpm issue with the "highest gear". Yes, more rpm would be gained by actually switching to a higher gear, with a slight trade-off in torque needed to rotate the alternator at said higher rpm. The two biggest issues that I see are belt slippage and primarily the fact that the wrong alternator is being used. This is an internally regulated alternator that requires external input to aid in regulating the output. An older, non-internally regulated alternator is what is needed. The one-wire styles used on the old Chevies or Ford's. They put out an unregulated max amperage and max voltage at rpm that is then regulated through the use of a firewall or fender-mounted voltage regulator. These alternators usually put out their max amperage, anywhere from 75 up to 150, and max voltage, anywhere from 12.6 to 14.2 volts. Yes, they still require the primary input of 12vdc to the exciter, but often, the voltage input from a 9v battery can be used to engage the exciter until the voltage output from the alternator can then be used. A decent start to the project. Don't give up yet.

[@thedudegrowsfood284]

yes. old style GM "1-wire" alternators are best.

[@briseboy]

Chain drive is MOST efficient of the three types - Chain, Belt, Gear. The LEAST ENERGY LOST occurs with chain drive. Alternator needs sprocket -- chain -- chainring of pedaling apparatus. I have noted that direct tire attachment to alternator fixed , like the resistance devices on standard bicycle stationary mounts does not slip, heat, or wear, as can belts.

[@s.v.gadder1443]

Its not self excited not an issue.

[@billyjones9045]

So do you need a voltage regulater ? finally got a old Ford alternator had the regulator separate but I don't have that I'm going to try to turn it with small electric motor see what I get out of it ... if it does have power can you run directly after that if you have some sort of regulator ? just have to use it to charge batterieslike a solar panel? I've been trying to figure this out for 3 years

[@therionman52]

Older style >non internally regulated, one wire - style "alternator"< is in fact a dynamo. The difference between the two is pretty big. The dynamo uses permanent magnets and produces dyrect current, while an alternator uses electro magnetic coils, and produces alternating current.

[@curtissill1389]

Use a tractor alternator, it only has two wires and designed just for charging. Far cheaper and works well.

[@jamesroberts4213]

Supposedly the car alternators with the multiple wiring can be wired in a series where they power themselves continuously.

[@dominicmogridge3920]

thanks for the advice.I'm considering if a small turbine could be installed on rising water main.use the pressure in the system to trickle charge.also,could small turbines be installed on pipework running from header tank.surely you'd get something with gravity.just an idea.if you'd like to chat about a few more ideas,im always happy to share ideas.maddog,west cork. republic of Ireland

[@bigdave6194]

you can buy ready made one wire general motors alternators ready to go under 60 bucks at most auto parts stores. I probably sold 200 over the years

[@madeinjungle1977]

Could I get some details...please :)

[@bigdave6194]

@@madeinjungle1977 Auto zone carries a 120 amp gm motors alternator for 68 bucks. Just ask for it. Tell them you want a one wire gm alternator. Or go out where the fuses and pigtails are and get the 3 dollar plug with wires to convert one to one wire. Works on the dual blade plug style general motors alternators like the 7140

[@daltonschrader8328]

2 things I'd recommend on this project. One add a tensioner to keep the belt tight. And maybe a pulley system to increase the final rpm

[@TheCabinetmaster]

Absolutely agree, it would be very easy to adjust the ratio to exponentially increase the RPM of the final drive. Incorporating some Capacitors might (just an off the cuff brainstorming) upgrade the starting power for larger demand requirements. I love being inspired by these great minds. Love to learn constantly. Majority of people don't realize that we don't have to be slave to big corporations and box stores to depend on for alternate gadgets, because they are not going to promote things to help us keep from spending a lot of money. So many things are simply much more inexpensive if you have knowledge or even think outside of the box. One example Fog-X, probably what 3-4 dollars. Look on the ingredients on bottle or MSDS, it's ISOPROPYL ALCOHOL, ie: rubbing alcohol that you can purchase for about 1 dollar US in a much larger bottle than Fog-X. Now I don't fault the makers of Fog-X, we live in a Capitalist economy after all. But you don't have to be a Sheep if you choose not to.

[@wildchild2193]

Yes definitely a pulley system

[@iamnormalandcanbetrusted]

@@wildchild2193 the contrast in the replies... lol

[@zpop]

Yes agree.

[@THEBACONATOR20]

And a flywheel

[@j.vincento7152]

Hello,great video. Here is help. Step 1. keep your bike set up with alternator the way it is, attach it to positive and negative posts of car 12 volt battery.. Step 2. Buy a Power Inverter 400 or 500 Watts,DC 12V to AC 110V Car Adapter with 5A (connect to car battery terminals) Wave Inverter USB Charger Adapter W/ Dual Outlets for Car Home Outdoor Use. Step 3. Peddle bike alternator to charge battery. Step 4. Plug in household items such as TV, radio, phone charger, computer (maybe coffee machine) note: it takes a car idling at around 1000 rpms 45 minutes to charge a dead car 12 volt battery. So doing your calculations you may be able to charge the battery in ??? If you have wind generator just bypass the bike and have two wires from wind turbine to battery. Or if you have a gutter make a paddle boat mini wheel over your alternator attach to building in harness. When it rains the water goes into gutter and pours over paddle altenator wheel with two wires to battery to charge. Would have to water proof or extend shaft to get out of rain. Same can be done with your bike back wheel over river with a paddle wheel connected to your alternator with wires to car battery and adapter to plug in for free energy

[@baseddoggie]

lol

[@kenkozak6428]

Excellent advice.... I was left wondering why he hadn't gone the route of using an inverter.

[@RESISTAGE]

and if you connect 5 inverters then you can have all power almost for free. no pedaling required.

[@cx3268]

Charlton Heston 1973 dystopian movie "Soylent Green". With his movie roommate Edward G Robinson used a bike/alternator to charge the batteries that powered their apartment.

[@Nono-hk3is]

Given the era of that movie, the alternator did not have the regulation circuitry this one does, and may even have had permanent magnets.

[@georgemaragos2378]

HI, it was also just a gimmick for that scene - its not really possible to generate usable power of a bicycle Here is sydney there is the "Power House Museum" one of the science exhibits is a bicycle with small generator, you sit of the bike and pedal, in front of the bike are some lights on a pole and a buzzer and up top a car horn, the scale shows 5watts 10 watts etc In my prime i could barely get it to go past 1/2 way and light up a very dimly light 2 incandescent car headlights - typically from 50's to 70's cars, full brightness they are 60 watts each on low bean and about 80 on high - both bulbs barely glowed like a small flashlight and the light was very yellow

[@johankriel8883]

In his book, first published in 1962 by Hachette, Bibliothèque Verte, Mon chien, mon ile et moi, Jaques Talrich decribes how he was left on a deserted island with a few fish hooks, a gun and a dog and some other equipment to re-enact a modern day Robinson Crusoe. He had to report daily by radio to the sponsors, and for this he was supplied with a radio transmitter powered by a battery that had to be rechargesd with a hand crank. It took him at least a half hour of vigorous cranking daily to recharge sufficiently.

[@pancudowny]

@@Nono-hk3is Such alternators existed... they were just few & far-between in production-model cars at the time. GM had the internally regulated 10SI-series alternator, but Chrysler still used an external-type... which, following a DIY wind-powered generator article in Popular Science at the time, was the choice for building such.

[@jerryduhon1075]

IM AT THAT AGE. THAT I REMEMBER THAT MOVIE. LOL

[@FreeCircuitLab]

You came in time! Just couple minutes ago I was trying to make a plan to do this! ❤️

[@rahulsoni3420]

I watch your videos I liked the light added in multimeter

[@poptartmcjelly7054]

As far as i can remember car alterrnators are terribly inefficient so you might want to look for something better.

[@bhoot1702]

Oh Sir app yaha

[@RuwanAtapattu]

Same.. I have tried this type of experiment few days ago.

[@badpenguin2059]

দাদা তুমি এখানে?

[@lenrys2244]

With good condition, you're supose to output about 200w of power with your legs. So with 1 hour of workout, you can be able to run your laptop for 2 hours :)

[@Shazzkid]

Or my desktop for 12 minutes

[@1Hippo]

My laptop easily runs 8h from the 50 Wh battery, that makes 6.25 W on average. So with 200 Wh it would be 32h! Or 16h for half an hour, which sounds pretty fair to me ;)

[@oplkfdhgk]

Or if you have pinebook pro you can probably run it for day or two :D

[@janeblogs324]

But car alternators have the worst efficiency of all types

[@artsmith103]

I think 200W estimate is too high. I think human is around 1/10th hp so that equals ~75W on a strong bike stand. Think about 10 guys in tug of war with a Clydesdale. Seems about right. You suggest 200W, which would be just under 4 guys.

[@wouwou9146]

Desperately watching this video as energy prices skyrocket in the EU.

[@Yoshi247]

4:00 to get highest rpm you need to use the biggest gear in the front and smallest gear in the rear.

[@______926]

Came here to sat exactly this, that was not the highest gear he was using.

[@Peasmouldia]

I thought that was odd. Especially when he then calculated the ratio for the belt..

[@slavko321]

maybe he's paid by big electro companies to keep us from using our bicycles as power generators?

[@fcbayern6681]

Not only by that, you can see, he's definitely a good electircal engineer, but not a mechanical one :).

[@keithmckinnon9498]

What a lot of people don't know about is surge resistance pressure, in other words if you remember cars before they had computers to maintain RPMs when you turned the headlights on while idling you would hear the engine bog down some and at the very instant you turned the lights on it would be very difficult for a person to turn that alternator.

[@the_kombinator]

All my Hyundai Ponys do this.

[@Norego.Newzealand]

Interesting thanks.

[@7o177]

you were looking up specs for the alternator when you should have been looking at the wiring diagram for the car that it went into.

[@darincrisp523]

You've done a great job breaking down why an alternator operates in the way it does. Thank you! Beyond the very cool engineering you've described very clearly. Great production!

[@ArchFundy]

At 4:09 you have the gears backwards. Front sprocket should be on largest ring and wheel one should be on the smallest in order to get the highest RPM.

[@ConorFenlon]

Give the guy a break, he's not a Mechanical Engineer afterall... Did you SEE the frame he made?? Wood and steel bracket construction, but the bike was held on with ZIPTIES!!! xD

[@circle7motorsports]

@@ConorFenlon bro that frame had me scared for his life lol also his belt tension was basically non-existent with a few tweaks he could get some power out of this thing.

[@ConorFenlon]

@@circle7motorsports Facts. Guy's a lunatic!

[@andrewread154]

Why not use the alternator to Charge a 12V battery and then use an inverter to produce 240V? Then you can just charge the battery when you have the opportunity…

[@josiah3618]

Ya your right and it’s been proven too. There’s people online that have videos of water wheels connected to alternators charging 12v battery’s. They all get connected and can power a medium size cabin while being charged still.

[@padraiggalvin2807]

Good idea. My uncle has this setup near a big river.Works good except the power isnt suitable for motors as the ac sinwave isnt pure.

[@edwaggoner7403]

@@padraiggalvin2807 One needs to ensure it is a full wave inverfer. They cost more.

[@brucetec6597]

@@padraiggalvin2807 a car alternator is AC current if I remember correctly and the rectifier converts it to DC.

[@padraiggalvin2807]

@@brucetec6597 yes correct. I should have said he uses an inverter to convert it back to AC voltage again

[@stu3775]

Gilligan's Island had a bike generator that worked great, I think you need some bamboo.

[@democracyforall]

He needs to either remove the one side of electromagnet and put magnets there or either he magnatised and it will work fine. Many people have done that already.

[@chucktaylor4384]

STU377 my good sir next round on me..lol. Fuggin brilliant sir. I don't give a hoot who you are, that shit is funny

[@stu3775]

@@chucktaylor4384 Thanks, bro. God bless.

[@pavlosfteropetra777]

Anyone else coming here because of the criminal actions of the UK government & utility companies?

[@JeremyNaus]

If you use the smallest gear on the wheel, the wheel will turn faster => big gear at the peddles and small gear at the wheel = highest gear ratio ;-)

[@louf7178]

Using bicycle: Will instantly convince people how *much* energy is used (and wasted).

[@seanhammer6296]

I had the idea of hooking up all the workout machines at a gym to generate power. It's kind of obvious really.

[@benjaminsagau]

I travelled a while ago in Belgium I believe,and in the airport there were bicycles where you could ride and charge the phone in the same time.I was surprised how much energy I was supposed to use to just charge my phone.

[@louf7178]

@@seanhammer6296 LOL. I did too.

[@seanhammer6296]

@@louf7178 With all the greenies constantly whining about climate change you'd think somebody would've figured that out already. smh

[@mgabrielle2343]

yes, indeed, human muscles can give out a lot of power but only for a few seconds, they will get tired even by a 5 watt continuous energy drain from leg muscles.

[@ChristianBehnke]

[amount of food required to fuel your body + time needed on the bike] > [cost of electricity] But the knowledge gained is invaluable!

[@protonjinx]

Human bodies are horribly inefficient at power conversion. Vast majority of caloric intake is converted to heat. Only a few % is converted to usable work.

[@Felipe2077tv]

While you are right that this is an inefficient form of energy production when taking into account food, this would be a great excuse for somone to exercise!

[@daklhs6460]

- gym fee.

[@johannriedlberger4390]

@@protonjinx even carburated gasoline engines do that much better

[@LuaanTi]

@@protonjinx It's not _that_ bad if you only count the time you're working, without including resting. Maintaining a 100 W output produces about 200 W of waste heat, so the efficiency can get close to 30%. The single-digit % values come from dietary tips, which essentially assume you only workout for half an hour or hour a day, while maintaining your body has a relatively flat cost per hour. It mostly comes from bodies just having so many moving parts. The lowest levels of metabolism, like converting pure glucose into mechanical/electrical energy, can by various estimates go as high up as 95% or more. This is not too surprising when you realize it's basically an electric dynamo, _not_ a thermal engine (which would be ridiculously inefficient at such low temperatures as 36 °C, of course!). Getting from there to actually moving your legs powering a bicycle drops the efficiency like crazy, though. But using that energy to power something like chemical synthesis? That's pretty awesome, compared to having to do chemistry at high temperatures and pressures.

[@benchleyfalconer-kc5hj]

I made a generator like this several years ago from a stationary exercise bike. The cast iron flywheel acted as a pulley to mate with the alternator at around 25:1 gear ratio. Using a buck converter and a 9v battery I was able to vary the voltage energizing the coil which had a direct relationship on pedal resistance. I was able to output perhaps 50Watts for a short time with reasonable effort, but when turning up the voltage coil resistance became too high that the alternator would barely spin with maximum effort. It was fun to experiment with.

[@ncot_tech]

Reminds me of an episode of Red Dwarf where they're trying to fry an egg using a bicycle powered hair dryer :D

[@touchedouche8806]

They’re all dead dave! Dave. They’re all dead.

[@lonewretch]

@@touchedouche8806 No Dave... They're all dead. They're dead, Dave... great show, great episode.

[@jan237]

Try powering the exciter coil with the output of the generator!

[@SnareX]

That's how cars do it. They start off battery power but since the charging circuit is tied together, well I'm sure you get what I'm saying

[@Neetje42ever]

Not the exciter coil but the voltage regulator. It will give you a steady voltage output with the amperage increasing as you put more power into the alternator, and it should smooth out the resistance similar to what GreatScott did.

[@GamerLoggos]

It would be more sensible to just remove the exciter coil all together and install some neodymium permanent magnets. It removes many problems this setup has. No need for extra power input and no automatic regulation to keep the voltage at a stable 12v. You can regulate the voltage in-circuit without worrying about the way the regulator circuit on the coil messes with the RPMs. Its much easier to peddle steadily if the alternator isn't fluctuating from hard to easy to spin constantly, and you can take the output right into a charge regulator into a battery bank to store up the energy. This would never replace your home AC, but it definitely could be a great emergency power system to run 12v lighting for a home and some light electronics like radios and cell phones in a black out.

[@xaenon]

@@GamerLoggos I think a decent solar setup with storage batteries would be a much better solution.

[@XenFPV]

@@xaenon I think a much better solution would be large centralised power generation serving multiple homes with a system of fossil fuel, nuclear, and renewable energy powered generators with a complex system of oversight to ensure every home has sufficient energy at all times and to cope with variable demand. This is not supposed to be a "good solution", it's a fun project.

[@ZomgLolPants]

Use an exercise bike, they have high quality bearings and heavy wheels that you can use as a flywheel

[@zpop]

I was thinking what about a stationary bike? when he built the frame Then thought he had more flexibility with gear change

[@edism]

@JSacchetti1 lol funny but you're right. Adding a flywheel to this is pointless. Also what do the bearings have to do with this?

[@edism]

@JSacchetti1 Well no not really, different bearings are designed for different applications.

[@edism]

@JSacchetti1 LOL wat?!

[@jeffkiehne2545]

@JSacchetti1 Not true they make cheap in China.

[@Ron-dx9wq]

I read an article in the 70s about then Tour de France champion, Eddie Mercx, who could generate 1/2 a horsepower for one hour (only). As 1 horsepower is roughly 750 watts, Eddie could produce roughly 375 watt-hours (0.375kWhr) - bugger all, really. An average human could produce far less.

[@UBsLab]

Great scott uploads a video and I leave my school classes.

[@JCBOOMog]

I'd stay in the classes trust me I'm out of lockdown now and my maths is screwed

[@Krmpfpks]

By leave you mean alt-tab?

[@greatscottlab]

Glad you like them!

[@venkatperla]

So what? You're opting for the better education

[@graealex]

Average human should be able to deliver 200W+ on a bike. I think the problem is still the generator setup.

[@abdellahbarrous8516]

I think the problem is the load. A resistive load will draw only U^2/R, no matter what the maximum available power is. I think voltage is proportional to rpm, so instead of increasing rpm, he could use a bulb with lower resistance or try measuring short circuit current...

[@graealex]

@@abdellahbarrous8516 But then he shouldn't have had trouble maintaining the speed. Obviously matching impedances for maximum power transfer is still important.

[@IceProducts]

Nice video. Car alternators are quite inefficient ~40% if I remember correctly. Best bet is to get a permanent magnet dc motor as your generator for your bike setup. The best place to get a cheap one of these is from a treadmill. I picked a broken one up for free, just has to move it. The motor rarely fails, it is usually the motor controller which it was in my case. These motors are compact and are usually rated between 2.5 HP to 5 HP.

[@BasementEngineer]

Do you have any idea as to the efficiency when a tread mill motor isused as a generator? Years ago I used a wind shield wiper motor as a generator which had a permanent magnet field. Upon some investigation I was disappointed to find its efficiency to be only around 50%. Central power plant generators can have efficiencies as high as 96%, I believe. This is not the efficiency of the overall plant, only the generator portion thereof.

[@skonky]

there’s a video of a cycling athlete using a set up like this to power a toaster, really makes you appreciate how much power they draw by how hard he was working

[@d942yd42]

kzbin.info/www/bejne/iWWyZqmlhKikd7M

[@thepuzzledsage]

Makes me appreciate a 300 watt solar panel too

[@backgammonbacon]

@@d942yd42 Jesus the muscles on that Guy, he looks like a cartoon character.

[@ThePinkPanth3r]

The toaster is a very high draw though, you would want to store some for sure so you dont have to some how output 1000w.

[@wobblysauce]

Power isnt the issue... but the intensity over a short time.

[@gregoryrusinek7498]

You need to get rid of the alternator you are using and get you one of the simple internal regulator kind from the older GM 1 wire hookup kind. I believe it's a CS 130 MODEL,but don't quote me on that,that's all you need to solve your charging problem. The alternator you are using now is for newer model cars

[@Mrdibzahab]

That final calculations makes you realize how much energy there is in car fuel!

[@Toastmaster_5000]

Or really, how much energy you're not getting to the wheels

[@IrocZIV]

I really want to put a tensioner on your set up, that floppy belt bothers me :P

[@vasili1207]

Dude that just makes too much sense...

[@darekmario446]

English - Alternator Polish - Alternator Italian - Alternatore French- Alternateur German - LICHTMACHINE - (Lightmachine) #justgermanthings

[@Haselui]

But Lichtmaschine is not the correct word. In car shops it's just called "Generator" :)

[@Hobby_Electric]

Der Begriff ist mittlerweile inkorrekt, und ist nur Umgangsprachlich gebräuchlich. heißt bei uns in der Fachsprache auch ->Generator

[@5roundsrapid263]

@@Haselui They were called generators in the US, too, before they used AC motors. Now they use rectified AC motors.

[@demogadget]

Dutch - Dynamo

[@Fred-mp1vf]

😊 It should be permanently wired to the TV, computer & phone charger if you have children. Make them work for it!

[@zurimuris4222]

it seriously makes me face palm that you're using low gearing on the bike... wth. you'd want the chain on the largest sprocket near the pedal or crank, and on the smallest one for the wheel, the alternator shouldn't offer much resistance and you could get the greatest return from each pedal of the bike.

[@falconater68]

This.

[@dominicmogridge3920]

true words.I raced pushbikes in my youth for Brighton team.statute mile speed runs had a massive oval shaped cog(more ergonomic so more leverage when your legs at weakest point)and tiny cog on back.took six people to push you so you could actually pedal,then arse in the air,chin on the handlebars and pedal like the devil.reversing this will give you the ratios you need.obviously number of cogs should be optimised.

[@kurtisb100]

If you output more than 30 watts consistently you’re an absolute unit. Low gearing makes sense because when you pedal, having a fast cadence lowers the strain on your joints and ligaments. The load on the system changes the effort required to pedal, so gearing it higher would make it unusable for a human.

[@kurtisb100]

@Lawrence Anderson yeah. 6.5watts per kilo for 24 minutes. 450 watts won’t even run your microwave; hell, it won’t run some TVs and that’s at a sprint level that only a top tier athlete can output for extremely short duration. If you output .06kw/hr per day from a bike you’re in amazing shape. Here’s the thing; I’m an electrician by trade and I’ve been into road biking for a while. I have ridden with guys who have power meters in their pedals. After a 90 minute ride if they had an average output of 30 watts we were all dead tired. If you don’t believe what I’m saying, try it yourself. You can’t just “spin it faster” once you add load.

[@zurimuris4222]

@@kurtisb100 I understand what you're saying, however in the video it doesn't appear to have much, if any resistance from the load of the alternator.

[@travjord3030]

to avoid slippage, you should put on a tension pulley

[@ericg4915]

Also I think he's losing a lot of power by not having any tension on the alternator pulley. I've seen it before in a car with a bad tensioner having low voltage problems

[@DarkLinkAD]

If you peel the belt on, its enough pressure. I size belts exact, minus a half inch. I think thats 13mm or so. You can also bring a belt up to heat, if sized too large, to shrink another 26mm or so.

[@jonjacobjingleheimerschmid3798]

It's irrelevant...because a man can nowhere near turn that alternator at full "volume" My experience is, you have to stand and push down on one peddle just to get it to go down once... Though I am experiming with a 14 amp 12 volt alternator hooked up to an airdyne.... If I achieve that to work I will consider it to out do my own exptations...

[@ericg4915]

@@DarkLinkAD his belt was really loose, I guess if he peeled it on that would suffice but I still think having a little tension on the pulley would go a long way in terms of power, not too much tension though

[@kimnenninger7226]

Great video. I needed to learn this! I like that he is able to show us on paper as he explains what is going on with his experiment.

[@mickqld3003]

The effort needed to rotate an electrical generator or alternator, that's electrically loaded, is surprisingly high. That's why people into car drag racing prefer to not use an alternator at all, it noticeably robs engine power. But in normal family cars, we can spare the horsepower, for electrical power.

[@ratlips4363]

If you add a flywheel, your input/output will be more stable. Heavy enough and you probably won't have to peddle all of the time. Put a tachometer on your bike and you can find what speed is the minimum to produce what you need

[@andrewhaas5626]

I was thinking of one of those rowing machines . Has anyone tried this idea?

[@Muckin-Fuppet]

You got it check out Billions in change

[@rossbrumby1957]

You will have to pedal all the time- if you don't, the flywheel slows and you need more effort to get the heavy flywheel back up to speed. The only positive effect it has is to act like a mechanical regulator, keeping a smoother, more stable rpm.

[@CaedenV]

That is what I was thinking; A flywheel (or just weights attached to the back rim) while used in a lower gear can help move things much more consistantly at a higher power output. When you are biking on the road your body becomes the 'flywheel mass' that keeps the bike moving at a steady rate even though the down-strokes of the pedals are inconsistant. When you lift the back wheel you loose that. Another thing sorely missing is a tensioner on the belt. The alternator would work much better with a higher magnet voltage, and the tensioner would prevent that slippage. So more gain on the alternator, combined with a flywheel to even out pedaling efforts would probably go a long ways towards making something like this work. Enough to power the whole house? Oh, probably not. But enough to supplement a solar array on a cloudy day? Maybe. Or enough to power 1 or 2 household items? Probably. But this is why you have kids. If it is going to take him 14 years with this setup to power his home, then he just needs 14 kids pedaling non-stop to live his dream! lol

[@shplayshiggty7537]

Just saying a flywheel setup for this would be great along with the belt tensioner. A different motor would make all the difference as well. Depending on what alternator he is using can also effect the results of this test.

[@collectingonthecheap56353]

Anyone else reminded of the Mario Party minigame where one has to pedal the bike fast enough to turn on the light, before the Boo gets you?

[@hugono3938]

Which mario party game

[@collectingonthecheap56353]

@@hugono3938 on the original on N64.

[@mcanderson0]

Automotive crank pulleys are 3:1 ratio compared to the alt pulley (6” crank, ~2” alt… or very close). The alt can produce voltage starting around 3000 alternator rpm up thru 18000 rpm. Thats your sweet spot for producing voltage and current, 3k-18krpm

[@3DPDK]

Many auto alternators only need the external exciter voltage for a moment. It's usually applied when the ignition key is in the start position. Once the alternator is generating power, the regulator taps off the output voltage and applies the power to the coils as needed. In some cases applying a continuous external voltage to the exciter will burn it out. It causes over-voltage on the output and unnecessary magnetic resistance within the alternator. The use of a storage battery, acting like a capacitor on the output voltage, means the exciter current is far more stable, and drops off as the battery comes up to charge. It is actually more efficient to then run the 12V DC from the battery into an inverter and run the lighting on 120 VAC. Regardless, simple math tells that a human powered bicycle is just not enough to power much of anything. The average person can *sustain* about 100 watts of continuous power output at the legs for an extended period. Some of that is lost in bearing and drive friction and heat in the generating system itself. The laws of physics says if you output 100watts from your legs, it's impossible to get more than that out of the generator and usually it's a lot less.

[@THOMASTHESAILOR]

You're right . He's got the exciter coils on all the time . No generator runs like that ..

[@danburch7926]

You still need the 12v battery to power the internal magnets till the alternator makes its own power. That's why the rectifier is used.

[@alanangelfire1217]

I'm sure someone has mentioned this already, but it's far better to use a PMA (Permanent Magnet Alternator) such as those used for DIY Wind Turbines. Mine was 24v 2kW and would generate power at low revs. They're a bit more expensive than a car alternator though.

[@cryptoworldgames]

what about a 12v 500watt?

[@robertfisher4689]

An old ceiling fan.

[@debdodson5884]

Saw a (malfunctioning)car alternator do that prior to 2007.

[@lernenmitrobin]

3:09 "Sechspulsbrückenschaltung" --> awsome!

[@Nemesis-yn5wv]

I hate to say it but you did half of it wrong. You don’t supply 12v directly to the exciter circuit, that will break the alternator. You need to set it up the same way as it works in the car: the 12v is fed to the exciter via a lightbulb. In your car this bulb is the battery light on the instrument cluster. Feeding 12v directly into the coil prevents the regulator from controlling the charge. You only produced 20w because that’s what your bulb was using. Also en engines rpm is not equal to alternator rpm due to the pulley size difference. Alternators usually run about 2.2 times the engine rpm speed, this is because an alternator needs a minimum of about 2,000 rpm on its own internal shaft to produce power, so when an engine idles at 750 rpm the alternator still needs to be around 2,000 rpm.

[@nedlyest]

Old Chevy alternators work excellent for this since they have built in voltage regulator and large spade pins to connect to.

[@unitymixer]

You need a GM car alternator, from 1988 to 1995. they have a great voltage regulator built-in for this.

[@1fast72nova]

Actually any GM alternator from like 72-95 would work with a single wire. GM sure made some good stuff

[@robs9574]

@@1fast72nova does this still stand? I can just go to auto parts store or wrecking yard and grab GM alternator from years you specified and run on one wire? Thank you. Trying to avoid shelling out for a permanent magnet generator.

[@1fast72nova]

@@robs9574 pin #2 goes to the batt+ lug and that lug goes to the battery positive. The case is ground

[@gazzat5]

@@robs9574 you'll still need two wires for electricity to flow, just one will be to the case of the alternator like shown in the video. In a car the body of the car body is connected to the alternator and the battery negative so it's acting like a second wire

[@alexs-zq6ni]

A 1960's General Motors "two wire" alternator works wonders in this case usually runs an older style V belt.

[@hanc37]

I was thinking about it in 2008. An old 1960's Alt/w an external voltage regulator. A 12 volt car battery. 12 volt electric motor/w a V-belt and an invertor... I wonder if it would work? Or would the electric motor drain the battery faster than the alternator could recharge it?

[@jonjacobjingleheimerschmid3798]

@@hanc37 yes...you will use more energy than you produce

[@rossbrumby1957]

@@hanc37 yeah it would just drain the battery. You're talking about a "free energy "device of which there is no such thing. Physics has laws, you know.

[@BasementEngineer]

@@hanc37 You are talking about a perpetual motion machine, and this would not run for very long. The reason is that the energy conversion efficiency at each step of the process is less than 100 %. Thus, eventually the battery runs down because the process puts in less energy than it takes to drive the process, and things come to a stand still.

[@davef.2329]

Interesting. Thanks for saving me a lot of time, money, and effort before I attempted something similar. I'm too damned old to pedal something for hours at a time, anyway.

[@b.chuchlucious5471]

This video will come in handy for California residents.

[@Fred-mp1vf]

The irony is that many of them have resorted to using gasoline generators to charge their EVs 😂

[@SheaDesign]

PMA - Permanent magnet alternator. Also I hope you realize the smaller rear gears are the fast ones.

[@davidjames1684]

They are not gears. Gears mesh with each other (they usually directly touch other gears). Those are cogs.

[@ishmaeldiz2995]

@@davidjames1684😂 tosser.. On a Bicycle or a Motorbike they are called gears dumba$$ But keep acting like a know it all school science teacher ,its funny

[@davidjames1684]

@@ishmaeldiz2995 On a bicycle they are called gears, but incorrectly. If you took the time to look up the definition of gears, you would see that gears touch each other, and there is no chain or pulley connecting them. A bicycle fails this definition, hence they are NOT gears. Do you see any chains in the example of gears here? en.wikipedia.org/wiki/Gear. Scroll down and look at ALL the images. I don't see a single one showing a bicycle mechanism. Do you know why? Take a "guess". Bicycles don't have gears, they have sprockets or chainrings, cogs, and chains but NOT gears. Gears mesh with other gears directly. That is NOT the case in typical bicycles. It is possible to make a bicycle with gears, but I have never seen one. The main reason gears are not used on a bicycle is because the front sprocket (chainring) is a considerable distance away from the rear axle, thus is a much better application of a chain or belt setup. I don't see anyone else telling me I am wrong on this, only you, that is because YOU are wrong. Who is laughing now? Score: "science teacher 1", KZbin idiot 0.

[@GUEST-qw4te]

The most important part of the alternator is the diode/rectifier/voltage regulator. If you remove it, you will create ac, not DC, AND you will generate the same amps but at significantly higher voltage. The biggest thing to remember is at any given RPM, the voltage, amperage AND frequency changes. The frequency is what you need to watch if you switch to ac generation.

[@douglasghiorso5978]

Read my comment

[@JhonjacobJenkylhymerschm-pt1uu]

Has nobody else wondered/hoped the authorities have thoroughly checked this guys home/property for kidnap victims or persons being held against their will????? Who is going to ride the bike to generate power! And who tf would willingly do so or want to! lmfao...... Clearly only a Sado freaking lunatic would make such a useless way to generate power unless used as a torture method for one of his captive victims! #creepy100%

[@RuralTowner]

SOYLENT GREEN - Charlton Heston (Detective Thorn) & Edward Robinson (Sol Roth - aged friend). In their little apartment they have to periodically take turns recharging their power on something not too different. A scene kept from the book MAKE ROOM! MAKE ROOM! (of which the film was loosely based) by Harry Harrison IDK why...only seen that movie once (an old VHS)...never read or heard of the book until recently...but that was one of the many scenes that stuck & came to mind when saw this.

[@dangenovese8905]

I could eat a whole box of Soylent green right now. Mmmmm... People crackers!

[@ferix.98]

That exact same scene comes to my mind every time I see a project like this

[@johncastle7045]

Hi Scott ,great video thank you .Sorry it did not go like you hoped. I know you're not going to give up on generating more power. One previous comment stated largest ring on the front or near the pedals, smallest chainring at the rear wheel will generate your highest RPM. Thanks for the cool info. I would like you to create a wind turbine. Then show us all how to do it. P. S. It was difficult watching you pedal so fast knowing there were many more RPMs at the rear wheel waiting to be found by you. Thanks again John from Texas. USA

[@jksr127]

I also find it very cool to generate power with your own body 😎

[@Bauamt]

If you calculate the food cost, I assume it would be inefficient, still cool tho

[@greatscottlab]

I think so too ;-)

[@davidwillard7334]

IT !! GENERATES !! LOTS !! OF !! POWER !! WHEN !! YOUR !! ON !! THE !! TOLIET !!

[@MthaMenMon]

There's actually a guy (David Carroll) who has been developing a "power-suit" that uses the seebeck effect between your enviroment and you to generate around 8w~. The video is pretty old but if this manages to get to the market one day it'd be a boom i think. kzbin.info/www/bejne/boaQfHiDm8d1rrs

[@steeddison3153]

What about the cars coil pack...?? Include that in youre design.... Then show me the video ....

[@platin2148]

Seems like you need a way to push the belt from above so that it’s a bit more stiff.

[@yaash4123]

Yeah, a belt tensioner would probably help.

[@Fix_It_Again_Tony]

The tensioner needs to be on the slack side or the drive tension from the bike wheel would compress the tensioner. But you are correct, a tensoner is needed.

[@MAbduser]

I did this years ago and found it useless. Unless you have an external force (like a water fall or wind) you can't generate anything practical.

[@Monte_Crisco]

Once you notice the quick inhale after every sentence, you can't unhear it in every video.

[@thearvie]

Damnnn

[@DanKirchner5150]

thanks ! lol

[@warlikelaughter6230]

Salamandren it!

[@la24dogg21]

Dude Im halfway through the vid and I LITTERLY didn't notice this😅/! Now it's unhearable XD Ahhhhhhh

[@Pickle-Rick365]

Hey, don't ruin the experience for the rest of us Jack ass. Jk your eight tho, can't unhear it. Just glad I saw your comment at the end of the video.

[@diyhappiness6531]

I'm looking for someone that wants to take on a challenge. Do you have pressurized city water The goal is to hook up a water wheel of some sort most effective to create power for your house lights using the pressurized city water. So every time that you run water you can charge up batteries that will run your lights at night

[@technicallitesh4420]

How about magneting the rotor inside? It will produce a greater voltage output...🤔

[@4G12]

At the cost of losing voltage regulation capability. If you're trying to generate consistent voltage output, no.

[@indridcold8433]

I have one attached to an old lawnmower engine. Turn off the regulator and it comes out 95 volts AC. Run a small transformer and I get 120 volts without an inverter.

[@ancapftw9113]

He's German, so he would need 220v, 50hz. But that might work.

[@indridcold8433]

@@ancapftw9113 Perhaps two alternators in series may be of more benefit for him. Or, a different transformer to step up the voltage much higher would work. However, the automotive alternator is 60 hertz. That may pose a problem not as easily corrected as the voltage.

[@lukerazonski9598]

You will avoid the need to add a tensioner if you can remove the pulley from the alternator (or get one without) and you can install a chain gear on it. Also with a little more work you can add on more chain+ derailleurs and make the gearing go to ludicrous speed (you will have to add more shift cables obviously). Add all that with with more gearing on the crank and some front derailleur modification and increase speed for easier voltage... should work great...still not done with the vid just had to get that out.

[@fisheyelens876]

Yes there is a trade off between calories used and tork applied, also the friction of a chain and the friction of a belt driven unit are different, especially if you use a tentioner to limit belt slippage.

[@nonyabusiness9747]

The gears in my offgrid mind are turning

[@drakekoefoed1642]

i did a tensioner on a band saw with a little plywood door the motor was mounted on, and a piece of running thread to set it. my cement mixer, the motor is on a piece of wood underneath, and it is not even attached. i was going to put a hinge, but the one end just hangs from the belt and the other sits in the frame, it worked, i stopped fiddling.

[@ApocGuy]

by the time you're done with mods, you would already have dedicated machine built up from ground ;) . 3 or 4ft dia flywheel with smallest pulley possible for alternator and direct drive instead of belt should do the trick. but then again, if flywheels are thick, it would be major PITA to start it up (and slow it down)... kzbin.info/www/bejne/jpfJnKScrtKGjsU

[@TheKlaus3001]

Why use's everybody on youtube an car alternator. You need to much rpm with it. Use a windgenerator.

[@BigBlueMotors]

Make it self exciting with a neodymium magnet. With an excitor, you will need to vary your input amperage. Look at some of the KZbin channels that turn alternator into bldc motors. In addition, you need to rewind the stator to produce current at a lower rpm. An alternator for a wind turbine off eBay would work a lot better.

[@Deebz270]

Absolutely.

[@dougkinzinger]

Came for the content, stayed for the fantastic penmanship.

[@StationGarageSt]

fantastic indeed....

[@perryrush6563]

Agreed! Even when retracing. How does the felt tip not give out? Granted, I rip through paper as though I'm trying to chip stone.

[@TopEvt]

When you think you are the flash but then remember you are not.

[@bobshagit9503]

been saying this for years all you need is 12 kids.. they rotate an hour shift twice a day and you have clean energy!!! this is clear sarcasm since that has been lost on the internet

[@ClodDev]

Moving the chain to the smallest gear on the rear wheel will increase your gearing and result in an even higher rpm

[@andyhowlett2231]

But the higher gearing will demand extra work from his legs!

[@nathanchildress5596]

Yes, but he’s only turning an alternator, which has way less resistance than just pedaling a bike on the ground. Plus the smaller sprocket means he doesn’t have to pedal so quickly

[@andyhowlett2231]

@@nathanchildress5596 An alternator, when loaded to about 100 watts, will be quite hard to pedal. I saw a trial of this on an old science show and even a fit bloke couldn't go for more than a few minutes and the max power was between 60w and 100w. You would never 'power your home' from something like this.

[@petesquickfixdiyshortautor1218]

Thanks for doing this so I don't have to waste my time. I thought it might need lots of power to create a decent current since small gas power generators user a lot of power to create small amounts of current. I would like to see an electrolyses experiment that uses spark plug current from a spark coil to generate Hydrogen and Oxygen from water. It's my understanding that high voltage is best with electrolytes in the water to separate the two. I would do the vid myself but you are better than I.

[@chrisengland5523]

GreatScott's videos are normally very educational, but this one just made me laugh when he said he wanted to be able to power his house by pedalling a bike. I laughed again when he showed us the 1440 watt alternator that he had bought. A top athlete can only output 400 watts for short periods, and so (with no offence to GreatScott) he's not going to be able to generate 1440 watts all by himself, which would be needed just to boil a kettle. But to be fair, he did manage to generate enough power to charge his phone. Keep up the good work, GreatScott - your videos are excellent.

[@BangkokBubonaglia]

This comment deserves more attention. Worse, that 300-400 watt figure is often quoted, but it belies the reality. That doesn't mean 400 watts to the load. About 50% of that 400 watt figure just goes to internal operations and cooling off the body. So now you are down to around 200 watts at best to the load at your legs. Now add in the probable 50% efficiency of that bike and pully setup, and the best you could hope for is around 100 watts delivered to the alternator. The alternator itself is quite efficient. 80% or better at rated load, but less at very light output such as you could generate with a bike. So an Olympic class athlete might be able to produce an effective 50-60 watts of electric power for a couple of hours. As you stated, good to charge your phone. But it will take hours to boil a cup of water.

[@mikearchibald744]

@@BangkokBubonaglia Yeah, I've been muddling this myself. If you are biking anyway, or maybe have other bikers, wouldn't it be better to be actually charging a battery? I think the future is in LOWERING the power needed to run things. Most homes are HORRIBLY inefficient when it comes to power, and even more so heating. But the bike idea is great for RUNNING things, rather than powering things. I had a bike hooked up to a washing machine to churn the drum, there are bike turbines to power food mills that work great. And I hear they can even be used for transportation!

[@feilox]

It's not just him but tons of people still on the mindset of watts and volts, not Amps so they have very little understanding of how much work is getting done. I mean he can do the math out etc, but yea they just early into buying instead of completing the math thoroughly and understanding how many exercise bikes it'll take to run a computer. Let's say we get 12v at 2amps on 1 bike, that's 50 exercise bikes with alternator just running all day to power 1 PC about 1000watts continuously doesn't take into factor electrical parts such as more parts/buck convertors/regulators/inverterss etc... I mean it's good learning experience, I mean even solar panels and wind turbine don't give the stated power rating it should as well.

[@jimtrowbridge3465]

I hate to be a buzzkill but he has the bicycle in the lowest gear, not the highest gear.

[@paulandrulis4672]

Next time -- convert a ceiling fan. (use neodymium permanent magnets instead of the outside field windings)

[@TE_53349]

why not have the bike in max gear??

[@erwinaccurate]

I think a tensioner on the belt would greatly improve the set-up

[@Davidwhat]

you could have just used the tire against the pulley on the alternator... and then you have the bikes gears to use against the load resistance, changes.

[@richhaupt8878]

This was a fun video! Nice work! You have shown a very common problem. Engineers today have very little experience in fabrication .

[@sonyajones]

I ordered an alternator last year to try that myself. I will let you know how it turns out. Great video.

[@greatscottlab]

Please do!

[@oldmanpatriot1490]

This was pretty cool.... I did some research on alternative power sources because I believe the goober-ment will regulate it and use it to force people into doing things they dont want to do... One thing I found was there are certain washing machines that have a system that can create electricity as a water paddle .. Also the fan motors on cars used as wind turbines. If I had the time and resources I would try these things.

[@SchizSchool]

As I understand, mounting a turbine to a car costs as much energy as it produces