HOW TO REMOVE A STRIPPED LUG NUT

www.gfgarage.co...
Click the link above for more information

[@stevejames9823]

Yeah I'll just drive 45 minutes to get a special tool half way through a project. Thanks very helpful

[@GreenosGarage]

www.gfgarage.com/auto_repairs/Wheels/How_To_Remove_A_Stripped_Lug_Nut_GFGARAGE_5.html Click the link above to view actual tool.

[@VICT0RLAZL0]

Ok but how do I get the lug nut out to use on another rusted Lug Nut on the same tire. ?

[@zombiehunter5923]

Where could I buy this special reverse thread sucket

[@purestress2]

That feeling when a rusted or stripped fastener finally breaks loose his priceless

[@rocker112011]

that intro music sounds like a horror movie

[@GreenosGarage]

Lol, never thought of it that way!

[@andyu09]

What if I don't have an impact bud??

[@GreenosGarage]

You could probably use a ratchet with it, but here's another type of socket I use with a ratchet for the same purpose. kzbin.info/www/bejne/qoXHpmyDpsp9d9U

[@marilyndavis6959]

What do you do if the lug studs spin with the lug nut still attached. Best way to remove the lugs in this case. I had a tire shop try to remove frozen lugs on my truck they couldnt get them off. When i went to try they spin but do not come off. Any suggestions?

[@WAEMIDIV]

I managed to break Autozone's Emergency lug nut tool in half. The lug nut is still stuck on the wheel and now there's half a broken socket on it too. I'm gonna grind the whole wheel and stud off and just buy a new wheel I'm so sick of this

[@jendersonpen7175]

I hope this works the guys at the shop rounded off my lug just have to find that reverse thread socket

[@lifeofmarco8656]

If my lug is a 3/4, should i use a 3/4 socket? Cause i did and it broke my socket in half plz help, should i buy another one and try it again?

[@scottfirman]

You can use an extra stud and stick it in a vice,then remove the special lug nut remover. Replace,never reuse an over torqued lug nut,chances are the threads are ruined or its damaged on the outside from the special nut remover. He just got through saying it would probably be stripped and the outside of the nut damaged anyways. Just replace the nut. I carry a couple spares any more in my glove box. Number one thing is to check the torque on your lug nuts from time to time.

[@GreenosGarage]

great comments, advice, and ideas! I appreciate them. Thanks Scott

[@wadeely6967]

Definitely agree there, cant say how many times someone gets over zealous with a torque gun on my trucks, I try to do as much as possible my self for peace of mind

[@skyhawk2311]

What if your car is not in a shop. That pressure tool you used doesn't come into play if your car is beside the road.

[@GreenosGarage]

Try the tool in this video. it has a link i put in comments to buy the socket. kzbin.info/www/bejne/qoXHpmyDpsp9d9U

[@bradsampson1669]

Thomas Allen you can use a 1/2 inch breaker bar. I've done it a few times in the past on the side of the road.

[@philtrottier4442]

Do you have a tool to remove the wheel studs? I don't want to hammer them out

[@GreenosGarage]

A lot of mechanics use a hammer. I have used my hydraulic press if my hub is off the car. On the car I have used a universal ball joint separator to remove a stud. I have another press that I modified to do that exact thing, press out a stud.

[@06goatm6]

Why the heck did you put it back on?!

[@GreenosGarage]

The threads were not stripped the outside was. If the threads were stripped i would have replaced the stud and lugnut. No big deal as I can get it off again.

[@bulldog_the5.3]

Lol

[@cocotower]

He didn't want to embarrass himself explaining that the lug nut won't come out of these expensive special sockets, so you end up buying a socket for each lug nut that's stuck. Almost all of the other videos demoing these types of gripper sockets never mention the lug nut becomes a permanent friend of the socket.

[@GreenosGarage]

They have then at autozone. Just get the right size. They work great.

[@skyhawk2311]

That impact wrench is what it's called. If a car is nowhere near where one of those can be used, then what?

[@GreenosGarage]

try this video and the tool used in it: kzbin.info/www/bejne/qoXHpmyDpsp9d9U there is a link to the tool in the comments section

[@nickshaffer4271]

So someone looking this up, is probably in the situation. They want the video to get to the point. Not hear all the extras

[@GreenosGarage]

Yes, I believe that was one of my first videos. I have actually cut down the videos and actually sped up the frame rate for newer videos. It’s a learning experience.

[@tavaresmorales9008]

What about a lug nut that just keeps spinning ?

[@GreenosGarage]

If it’s just to outer cover of the nut you can take that off.

[@tavaresmorales9008]

@@GreenosGarage that came off too and it's still spinning tried a drill to the stud but the battery died

[@tavaresmorales9008]

@@GreenosGarage patched the tire anyways still rolling and now taking my chances until I make time to get that off and roll with 4 like I have been since that lug nut was put on wrong someplace in Indiana.

[@jcnavyboy89]

new drinking game... take a shot every time he says reverse thread

[@donellis5005]

Where do we get that special socket from

[@bobbycro-balt8398]

Having this issue right now. Buying one now. Hope it works!

[@GreenosGarage]

Did it help?

[@bragybhoy]

i got a lug nut stuck and it turns, but it won't loosen out, figured it might be stripped from the inside, a friend of mine said it got that way cause it wasn't tightened properly...bit of help? please? thanks :)

[@NYMPHETAMINE1236]

Bryan Lee Ilagan sounds like the post came loose from the rotor. usually happens when they get replaced improperly. sorry for the late response

[@bragybhoy]

Silent God 69 so is there anything i could do about it besides having them cut out?

[@NYMPHETAMINE1236]

Bryan Lee Ilagan honestly there's not much you can do besides splitting the lugnut (lug splitters are relatively inexpensive, especially compared to the shop). or the non recommend way of breaking the stud off with leverage. either way, after you get it off I would definitely replace the rotor.

[@bragybhoy]

Silent God 69 damn.... well thanks for the help bro, really appreciate it

[@NYMPHETAMINE1236]

Bryan Lee Ilagan no problem, sorry I couldn't provide too much info. good luck man!

[@14dogday]

where do i find one

[@GreenosGarage]

see the link I posted in the comments, or go to your local advance auto or autozone and they should have them. other autoparts stores should have them too. thanks for watching.