CNC Plasma toolpaths using Vectric software

[@codygokarts8690]

Well done. You explained everything at the perfect speed and detail. I have Vetric that came with my CNC Shark and am building a plasma table now. Can't wait to try what I learned here!

[@riverbottomband]

I'm trying to setup my PP from Aspire for my home built CNC plasma. Do I need a different PP for every different thickness metal I cut? The reason I ask is because or pierce height and delay will be different according to thickness cut? Thank you for all your help in the CNC community around the world. I have watched many of your videos and read many of your forum post. I have been using a cnc router for a long time but getting into Plasma.

[@mr28366]

Buon giorno come si fa per far apparire questa schermata di uccnc che mostri tu nel video? Io ne ho una diversa dalla tua. Un grazie

[@victortresvik573]

i am using Vcarve pro for my plasma / router table.. where and how did you set up the tool for plasma Thanks

[@regpugh9021]

Greg, Thanks for your e-mail, just subscribed to your channel. I have learned more about vectric/plasma control in your 20 or so minutes that i have all day. Thanks for that, clear, concise video. Regards Reg retired 75 UK Wales

[@cortegrabados3279]

add plasma post processor ????

[@sintoniaarteeserigrafia8786]

Olá tudo bem, e como adicionar uma pausa de 0,5 segundo antes do corte ?

[@cahnekad7129]

How to add plasma post processor. Help me

[@carroceriasnicar]

If you get it, let me know why I need the same thing

[@fryscountrylifechannel4437]

Could I talk you into doing a video on your plasma cutter table?

[@dandelikakhiladi8452]

Hi ,sir nice video... Which controller did u use (Hard wear)

[@Greolt]

If you watch the video you will see that I use UCCNC. It utilises its own hardware. AXBB-E ethernet controller in this case.

[@marvinpagaran8092]

hope you can share the post processor

[@Greolt]

I could do that but it WON'T BE ANY GOOD to you. It is specific to my plasm, control software, THC, even to my personal edits of the control software. Macros are written in the language required by the software used. You need to understand what YOUR setup needs in the way of gcode. THC requirements. Macro language Etc. Watch my video showing writing a generic Post Processor for a guide. kzbin.info/www/bejne/d5C3kGCcp9ugZs0

[@jorgeluispalafoxgarcia3243]

Hola, soy de mexico y me gustaria que me pudieras asesorar de como hacer mi posprocesador, manejo Drufel CNC

[@Greolt]

I am Australian. Only English. Sorry.

[@spidey4fun]

I have cut 2D!!!! Thanks for this!!

[@fryscountrylifechannel4437]

Thanks for sharing this I have VCarve desktop and a router cnc, and a plasma torch and now a new project. I hope you don’t mind if I pick your brain or ask you for some already created gcode?

[@ramonplanell3927]

Muy interesante y muy didáctico

[@rafaellopezmartinez2548]

Hola te enseña a hacer el postprocesador? Es lo que no entiendo no se inglés

[@Oséascachoeiro]

Excelent !!!

[@ജീവിതംപരാജയം]

Hello