Planer/Jointer Blades Sharpening - How to Sharpen Planer Knives with Sandpaper

[@GRINwood]

All free plans I ever made are here: drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing GRINwood shop: www.etsy.com/shop/GRINwood Support GRINwood: PayPal: [e-mail] Thanks for watching

[@robertsupernant6890]

Nice. Simple straight forward and no annoying music.

[@Mr_Beats777]

Пользовался вашей идей заточки двух сторонних ножей ручного электро рубанка. Просто отлично! И выставление вылета ножа это лучший способ 👍

[@arhitector.gordeev142]

На видео у автора, почему засечки на бруске именно 5мм ?

[@cZaRiFu]

❤🇷🇺🇵🇭🇵🇱🇫🇷🇩🇪🇺🇦🇨🇳🇨🇿🇮🇹🇦🇫🇺🇸🇮🇳🇵🇱❤️

[@magicman9486]

Wow great video. I have been a woodworker/cabinet maker for over 40 years and this is one of the best jigs for sharpening planer and jointer blades. It is so simple, yet i never thought of it.

[@tomwinters4367]

Very easy to understand and not a second wasted. It's a pity that all KZbin instructional videos aren't as well made as this one.

[@jonathanfegelein9361]

I’ve had this product for over two weeks and I’ve used it almost every other day kzbin.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ with my knives. After the first session of sharpening my cleaver, I recall slicing through a tomato, veggies, and meat a lot cleaner and smoother than ever.I only give my knives 10 to 20 strokes of the sharpener before every other use, depending on how much force I’m putting on the blade against the cutting the board.I don’t have expensive cutlery. Most of them are cheap ikea knives and my cleaver was bought at a market at a low price ($10?). The sharpener has given the knives a much better edge and I’m very happy with it.I don’t push down on the blade sharpener with the knife. I let gravity do it’s thing. As you’re supposed to.

[@cZaRiFu]

Greetings from Poland 🇵🇱❤️

[@markrbsir]

Very nice tool for my shop. Thank you for all the details. Simple and to the point. I will try to make this for myself. Thanks for sharing!

[@fieroboom]

Best & simplest method, hands-down!!! Thanks! 👍😁👍

[@MrBajanplayer]

Thank you for the Tips, and learning for us all! Best regards, and greetings from Austria!!!

[@digitalwoodshop]

I learned 2 tricks watching this video. The Jig and the 5 mm. THANKS !!!

[@liudas5377]

You are the king! I used your method. Easy and perfect. Thanks so much...

[@alex777dav2]

Очень не плохая идея, мало таких в интернете!

[@leandersmith6184]

This is how I was told to do the adjustment for the blades 45 years ago although the sharpening with the sandpaper was new thanks

[@АртурГаспарян-д2ь]

.

[@rodholcombe2968]

How long will brisket br 2.98

[@jacquelinecook5613]

This is a valuable addition to my woodwork collection kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

[@johnsonkhant6330]

Very good video

[@christopherjohnchilds805]

Well thought up jig definitely 👍

[@ЮрийФилиппов-е8щ]

Молодец , отличная приспособа . Пожалуй сделаю себе такую же . Главное простая и сразу затачивается два ножа .

[@ОлегКоробкин-у7е]

kzbin.info/www/bejne/qXuac5KlqNdjeLc

[@ИрекУмеров-м6ы]

Браво мастеру, отличный практик. Я польщен. Супер.

[@guyvangenechten6484]

Very Nice job as always looking good!!!👍👌💯

[@MichaelCampbell01]

very clever. That 5mm trick is brilliant; never saw that before.

[@НаталикаМарзаганова-ъ3я]

Thank you brother, God bless you guts in all world.Jesus loves you.

[@СултоновНазар]

Бисёр ҳам олӣ! 👍👍☝(Великолепно )(Ок)

[@olhesty2196]

Brilliant mate!!

[@GlennBrockett]

Nice jig.

[@paulsofronia2389]

Great video thanks!

[@dennymiser6333]

Spray and wash or shout works great to clean the burnt resin off of blades.

[@vladimirlobanev1076]

Спасибо,это лучшее с отличным результатом..!

[@fourpawz57]

This is very motivating and a way to control your planer blades sharpness your brilliant

[@davidmtz4688]

B bb.

[@freewoodencrosses]

I made a similar jig for sharpening jointer knives, but I like yours better. Way to go.

[@MenuTanaman]

Baru kali ini lihat cara mengasah

[@AnBar558]

A rare gift for a novice master. Thank. Good luck. :-)

[@cabman86]

And I always just bought new blades. Thanks for this.

[@ioannisarvanitakis7986]

Congratulations!!!

[@spamento]

Outstanding! That is by far the easiest and fastest tutorial I have seen. I will bond the sand paper to a sheet of glass for flatness but I just love the simplicity! Thank you!

[@MegaFisher19]

Всё гениальное просто!

[@redartps]

Brillant!

[@Marcone-Facilitador-Kundalini]

Simples eficiente, menos complicado é melhor que outros sistemas

[@bobsinclair757]

Très intéressant

[@adrienbernardino3993]

Juste génial...

[@samTollefson]

I have used this similar jig for years to sharpen my 12" planer blades, I just run them on my 6" x 48" belt sander w/ 120 grit then 220 grit does a fine job in a very short time. However, your second kerf to clamp the blades in with screws is genius! I would use thin shims that I had to make that I always had to mess with, they didn't work that good. next time I need it I will modify my jig or make a new one with your clamps. Many Thanks!!

[@advance-heating]

My question was going to be what grain of grit ? Whetstones are often 400 then 800 grit, but you think that in sand paper 120 then 220 is ideal ?

[@samTollefson]

@@advance-heating@advance-heating Using 120 and then 220 has worked fine for me; I used to run a flat stone over the knives while still in the jig but found that unnecessary. Good luck!

[@advance-heating]

@@samTollefson I'm also thinking of mounting all three blades into a hardwood jig at once, all three pointing the same way but far enough apart to keep them stable while grinding by hand. Think it'll work?

[@samTollefson]

@@advance-heatingI don't see why not; however, I would put 2 parallel and the 3rd one alternate to have a broader base for stability and use a hardwood block for it. In my situation, my planer has blades that are sharp on both sides, so one set is two sets of blades. Before I found this method of sharpening them, I would buy a new set when the old ones wore out. So when I made my sharpening jig I sharpened maybe 12 sets of knives, that was 10 years ago and I still have 4 or 5 sets to go through before I need to sharpen them again, pretty much a life time supply.

[@wm005]

Great idea you have there...

[@danielredondo1090]

Muy buen video saludó cordial Daniel

[@aquachinese4410]

Rare really useful educational detailed video on KZbin. You have a sincere heart to share your skill instead of showing off. Thank you so much!

[@IsaKocoglu]

Aferin Ustam benim!

[@SuperTakoe]

GOOD. Thanks

[@dleivam]

Brilliant

[@thuanbui2862]

Mẹo chuẩn cám ơn bạn

[@przemysawwitasik1823]

SUPER 👍👍👍👍

[@jarosawderybowski3506]

Super.

[@yurycz8933]

Nice

[@СерёжаШуликов]

Спасибо, супер полезная информация 👍

[@mdmx92]

such a simple solution...great job

[@_J.F_]

I have been using the woodblock 'blade holder' system for years with great success. Mine will hold the blades by friction alone, so no screws needed, and when it gets too worn it only takes a minute or two to make a new. I do put my sandpaper on a flat sheet of glass though, to assure flatness and no rolling of the edges, but I never bother with the whetstone and just remove the bur gently on the same sandpaper. It literally only takes a few minutes to get good sharp blades but I always find that removing the blades, and then reinstalling them, is what often makes me drag my feet before I get around to touch up the blades as it is a time consuming fiddle.

[@СергейНазаров-с6д]

It's like a visit to the dentist - you are stalling for time, but you know that the inevitable will come :)

[@heinzstrunz1317]

323r

[@jankolar6631]

Tank you.! Super!

[@stefaniepieper8693]

Top 👍😊

[@kubilayylmaz1716]

I watched couple of your videos, what a genius you are! Doing very well.

[@asddsa8918]

Да этот парень гений! Как раз мне нужно ножи точить на своём фуганке. Теперь я знаю что делать ! Спасибо!

[@cahndeso9080]

good .

[@storjoel]

Brilliant solution. This is going to save me so much money.

[@henrirogers5966]

Super

[@Oduncukiz]

Oha çok iyi fikir.

[@ruiqitools]

Good, this method is simple and convenient. I'll recommend it to more friends

[@юзикдуманов-ъ7й]

Is the most compact and convenient device I've ever seen. Like

[@gualtercalisto.miranda2328]

nice

[@ОлегКоробкин-у7е]

просто, и при этом великолепно!

[@darrylbuckett5380]

Sharp idea you have. Cheers

[@charlescote8391]

Thank you

[@СамоделкинБородин]

Спасибо👍👍👍

[@Ayrat.M]

Спасибо огромное за урок!!!

[@antonmueller2918]

super idee

[@Евгений331]

Гениально.

[@lukaspozarro5564]

Good

[@Richard-wk9le]

This is just a outstanding video Many thanks

[@youtukang]

☺☺👏👏👏👏

[@ZahodaGenadiy]

да, оценил, палец у тебя прикольный ))))))))))))))))))))))))))))

[@bulbash-bee]

Супер способ!!!

[@АндрейТретьяк-с6ф]

Видел подобное в 90 гг у родственника, оно было заводское и сделано из пластика, и он на нём подправлял ножи. Да и рыбаки на подобном могут ножи для бура править.

[@nurdinperabot3941]

SUPER

[@958fuser]

un ottimo video, chiaro, utile, corto, professionale, bravo!!

[@randolphtorres4172]

THANKS4GIVING (AWSOME)

[@АлександрИванов-з8э4г]

Отличный способ 👍

[@yogeshmixxx3605]

Vah aap to jayda jankar ho

[@pistolao_vr]

I made one just like that about a month ago. At least you shared it 🤣

[@buildingintheburbs5175]

No need for a 30 minute video! This was great!

[@donhuffer5167]

Prolly works great if you only have 2 knives.

[@mikeborth2476]

Genius!

[@MrFopoli]

Spero tu riesca a capire quello che scrivo. Molto facile e chiaro il tuo sistema di allineamento. Può essere utilizzato con qualsiasi pialla? è un sistema generale?

[@GRINwood]

yes, it works woth other knives too, but you should measure the sharpening angle on your knives before making this jig. Thanks

[@MrFopoli]

@@GRINwood e la misura è sempre di 5 mm?

[@alessiouli2034]

это было круто! за это и лайк и подписка.

[@vdsmade]

Ja zrobię sobie prowadnice do szlifierki

[@bachirbousbialaiche7455]

Thank you very much for this beautiful video

[@АлексейМожаев-ю5к]

Поперечная заточка конечно держится дольше, но для своевременной правки в домашний условиях, при отсутствии спец.приспособлений, самое то. Лайк.

[@gsxxxrrr]

Really good idea , thanks for sharing.

[@pearsonkalubi4871]

Nice work thanks 🙏

[@matthewstanton9633]

Wish I'd seen this last week. I had it all arse about face mounting the blades in the wood then bringing the stone to the blade. This would have saved me about half an hour

[@karolwadeczek8620]

Super pomysł - prościej i lepiej zrobić się tego już pewnie nie da. POZDRAWIAM

[@НазипЗайнуллин]

Отлично

[@EverydayProjects]

Brilliant!

[@МопедомКарпатами]

Вкотре пересвідчуюсь, що треба брати хелікал))

[@GRINwood]

Хелікал можна брати як доповнення. Як на мене, то чорнове фугування доски з пилом краще робити на традиційному валі - не так шкода, а далі хелікал

[@МопедомКарпатами]

@@GRINwood Так, Ви маєте рацію! В мене зараз звичайний на 3 ножа і ручний електрорубанок для зняття чорнового шару. Хелікал поки що у ванільних мріях 😃😃

[@willybaetens4648]

Hi, I surf a lot on the internet, I never saw this before. The jig is fantastic, but the way you control the right height, sublime. I suppose you set the planner on a certain height when you measure the travel??? Different height gives different travel, not??? Thanks for sharing. Keep it safe, it is not over yet. Willy from Belgium. 😷😷😷

[@hariornaldowersdorfer3510]

Super top muito bom mesmo parabéns gostei muito 👍👍👍👏👏👏🙏🙏

[@tjacksonwoodworker3726]

Very nicely done..simple and effective!