Growatt ShinePhone WIFI Instruction

  Рет қаралды 149,182

Shawn Fan

Shawn Fan

4 жыл бұрын

Instruction for using Growatt ShineWIFI-X and ShineWIFI-S. If the dongle WIFI asks for a password, it is 12345678.
If you need the installer code, please register your installer account via oss.growatt.com

Пікірлер: 107
@Malc664
@Malc664 4 жыл бұрын
You should have 4 &1/2 thousand likes mate. This is the only video that helped me, bugger the rest.Thank You heaps man.
@malukkar
@malukkar Жыл бұрын
To everyone with installer code problem. I struggled with installer code for two months since my electrician didn't have installer code and didn't get it. Finally I understood to change the land to Albania and then it didn't ask the installer code as compulsory. After you successfully register it you can choose your own country and time zone and address so it is not a problem that you have chosen firstly wrong country. Finally it works!!! 😊
@harvey785
@harvey785 Жыл бұрын
Great video, expertly explained & helped me get my system back online after a change of WiFi hub. 👍
@DutchAussieProductions
@DutchAussieProductions 3 жыл бұрын
Thanks for the video. Very clear instructions. I will buy the dongle now. Have a nice day.
@spurs3334
@spurs3334 11 ай бұрын
Excellent Video really helped me when we changed our Broadband. THANK YOU!!!!!!!!!
@emmabackhouse1834
@emmabackhouse1834 3 жыл бұрын
Thanks for your help. Great instructions, clear and informative. Cheers!
@carloestrada1504
@carloestrada1504 2 жыл бұрын
Very helpful video. Thank you very much 🙏🏼
3 жыл бұрын
Thank you! this was soooo super helpful!! :)
@schildersbedrijfmm-vakschi5679
@schildersbedrijfmm-vakschi5679 3 жыл бұрын
Thank u very much for the clear information , it helped me a lot greetz
@paulwhittaker583
@paulwhittaker583 2 жыл бұрын
It Works. Thank you Shawn
@neethumelbin5812
@neethumelbin5812 3 жыл бұрын
Thankyou... very clear instructions
@yogendrayadav
@yogendrayadav 2 жыл бұрын
Yes I do agree with you. You are also using it for solar power generation?
@harism5589
@harism5589 18 күн бұрын
This is a "missing manual". Unfortunately I received a faulty Shine WiFi dongle. With the help of this video I could prove it. Now I need to follow up with Growatt to get good dongle!! It is just out of box, so I expect it should be straight forward process.
@dawnwilliams6966
@dawnwilliams6966 3 жыл бұрын
Great instructions
@KhanSahab-do5zl
@KhanSahab-do5zl 2 жыл бұрын
thanks... very helpfull video
@hyperion8008
@hyperion8008 Ай бұрын
It took me two days of resetting and trying again and again and again until finally it just decided to work. These devices are absolute rubbish when it comes to getting them on-line! For those asking about an installer code...this seems to be a UK account requirement? I just created a new account, and chose France as my home country. When it came to adding the datalogger, I chose the UK as the plant country. I could never get to the local datalogger web page as in step 2. Not sure if they've pulled that functionality? In the end...here's what worked for me: Reset device (long press of the button - MUST wait for the flashing red light). Tried the 2.4ghz method first. It failed. Next try the hotspot mode (had to short press the button to enter into hotspot mode again - blue LED)...bingo. I have no idea if that combination is what did it...but probably by fluke it worked. It does only work on 2.4ghz radios though. Most routers will be 2.4 and 5ghz combined so you shouldn't need to add a dedicated radio.
@nayanjagirdar8408
@nayanjagirdar8408 4 жыл бұрын
Very nice sir thanks 👍
@rowanmaulder9528
@rowanmaulder9528 Жыл бұрын
great - thank you worked great
@gorankunovic6404
@gorankunovic6404 2 жыл бұрын
Without installer code can't pass proces
@damaha5
@damaha5 2 жыл бұрын
Hi Great instructions and have it all working well. I now want to have the customer have access to the data logger as well but just dedicated to their own installation. can you point me to instructions on how to do that? Many Thanks
@jamesvdm
@jamesvdm Жыл бұрын
Method 2!! I spent so many hours on method 1 to no end. Method 2 had me connected in 2 minutes.
@octochrome
@octochrome 3 жыл бұрын
Thank-You :)
@gunnarkulbotten9627
@gunnarkulbotten9627 Жыл бұрын
Hi! As many others here also have noted, the installer code can not be left blank. What code can I use, or what do I have to do to get a code? I`m an end user, so I guess I should not apply for an installer account?
@zamedicQ
@zamedicQ 2 жыл бұрын
Hey Shawn. Great and helpful video! Well done. We have one of the Growatt inverters that we’re using purely for uninterrupted power with the main power grid. No photovoltaic input. Can we still use this Wi-Fi monitoring method just to have some means of remote monitoring and notifications if the mains fail and battery power is low? We run a small medical facility during daylight only and have very unreliable power that can be off for a few days at a time
@AGhostInTheMachine
@AGhostInTheMachine 4 жыл бұрын
Is there any manual or instruction for using the ShinePhone software after it is successfully installed? I can't find anything available. The manufacturer's link to 'User Manual' is blank (no download).
@irawan_vincentius
@irawan_vincentius 2 жыл бұрын
Thank you
@tonyzarzecki5408
@tonyzarzecki5408 3 жыл бұрын
Will work on other inverters with same connect type?
@Carfric
@Carfric Жыл бұрын
Can this work with off grid growatt? The storage inbuilt is great
@dineshsomasundram1416
@dineshsomasundram1416 2 жыл бұрын
My Growatt 4200MTL Inverter was installed in March 2012. I need a firmware update in order for my Shine WiFi-S to be able to communicate with it. Can you please send me the link to the ShineBus 4.2 software and the firmware update for my inverter? Thank you
@jaanasalo1904
@jaanasalo1904 2 жыл бұрын
Istaller code is not optional and I dont know what it is. What to do?
@laiska_merirosvo
@laiska_merirosvo 2 жыл бұрын
kzbin.info/www/bejne/g5uUnZKjnrRlbMU I used this code but you should to save Poland as assembler location (your plant sure can be anywhere)
@bramcoteelectrical1088
@bramcoteelectrical1088 2 жыл бұрын
0000
@jatinjindal2528
@jatinjindal2528 2 жыл бұрын
Can I modify my output Voltage range from shine wifi module via my phone apl ?
@miqueastwerda7993
@miqueastwerda7993 2 жыл бұрын
my green light is solid, but it doesn't go lighting blue after push the restart bottom. why?
@manickbarry
@manickbarry 2 жыл бұрын
Hi I have 2 inverters one 5kw and one 2kw I have the 5kw one connected and and trying to add a data logger to the 2kw one do I need to set up a new plant or can I add the second logger to the same plant?
@Danyheli1
@Danyheli1 3 жыл бұрын
THANKS FOR SHARE.....A+++++
@firstsat2000
@firstsat2000 2 жыл бұрын
it is more types of growatt wifi dongles.my one i can not make it work because of the damn installer code :( . Can anyone help, please?
@veryspicyspidy9004
@veryspicyspidy9004 3 жыл бұрын
Mine is showing steady Blue with I tried to press and hold reset for 6 seconds, how to get it to flashing Blue?
@gabrielmaul
@gabrielmaul 4 жыл бұрын
Hello, do I need to have the dongle plugged in in order for the inverter to work, or will it work regardless of whether the dongle monitor is plugged in or not? Thank you
@shawnfan751
@shawnfan751 3 жыл бұрын
Hi, dongle just for monitoring. The inverter is able to work and generate power without dongle. Thank you.
@mmoussawi1
@mmoussawi1 2 жыл бұрын
what is the password when i try to connect to dongle wifi to configure it ?
@HesleyCapey
@HesleyCapey 2 жыл бұрын
I can not leave installer code blank, it is required field? How to do this?
@johnboyceflying6863
@johnboyceflying6863 Жыл бұрын
Doesn't work with the latest version, I spent many hours trying to get the dongle configured. Can you do an updated version?
@ralfkolo
@ralfkolo 4 жыл бұрын
Hello, you will apologize. Also wanted to install this Growatt dongle with my friend. The application is easy to install and install. Creating the system with 1KW is also easy. My friend has problems. We are surprised that the "Datalogger" supposedly exists in the system. But it is not on a list. We have already asked the manufacturer for help. After entering the serial number and the "CC" code, it does not continue. "Device already exist". Do you have a tip for us? Greetings Ralf.
@bramcoteelectrical1088
@bramcoteelectrical1088 2 жыл бұрын
Delete the dongle in the list look for the plus sign
@jasirkp
@jasirkp 10 ай бұрын
ഒരു data logeer 3 different account ഇല്‍ use ചെയ്യാന്‍ പറ്റുമോ
@KashifAslamhunkyspunky
@KashifAslamhunkyspunky 2 ай бұрын
doesnt help me, problem is my dongle's light is flashing all 3 lights at the same time and it doesnt reset to any one single light, tried pulling and inserting it multiple times. it just doesnt connect at configuration step and says configuration failed (sentence below the diagram or animation is router connection failed)
@dondandic
@dondandic 2 жыл бұрын
It asks data installer code when you choose europeian country. Stuck there as i dont have a code.what to do?
@vishwshah8322
@vishwshah8322 3 жыл бұрын
In the user manual it is described that i need to insert a sim card inside that rectangular module. So is it mandatory ?
@adelaidepeiable
@adelaidepeiable 3 жыл бұрын
No
@bramcoteelectrical1088
@bramcoteelectrical1088 3 жыл бұрын
thats for a gprs different module
@DutchAussieProductions
@DutchAussieProductions 3 жыл бұрын
Thanks for the video. Are there any Apps to do this with an iPhone that you know of? I can't find one. I have the Growatt 2000.
@bramcoteelectrical1088
@bramcoteelectrical1088 3 жыл бұрын
shinephone
@DutchAussieProductions
@DutchAussieProductions 3 жыл бұрын
@@bramcoteelectrical1088 Thanks for the reply. I have installed the App. Have a nice day.
@alikanso6357
@alikanso6357 2 жыл бұрын
No matter what method I use. The dongle ends up flashing green.
@tedere
@tedere 4 жыл бұрын
Hi can you just use the dongle unconnected, i within range of phone to monitor, my garage is to far from the house for wifi to connect, thanks.
@shawnfan751
@shawnfan751 3 жыл бұрын
Hi Nickel, if your inverter is too far away from your WIFI router, you may need a wifi extender or a Growatt ShineLink device.
@pino_de_vogel
@pino_de_vogel Жыл бұрын
you can no longer leave the code blanc.
@hasger1941
@hasger1941 Жыл бұрын
Why will it not continue without a installer code ??
@jacksemenoff2148
@jacksemenoff2148 3 жыл бұрын
Hi could you help please? Scanned donger and mentions already added..but in list mentions disconnected. Also if I go IP address way I need a password for the Donger ,where to find that? Cheers
@shawnfan751
@shawnfan751 3 жыл бұрын
Hi, the password for the dongle is 12345678. If the App showing datalogger existed, please check the video from 6:18. Thanks
@jacksemenoff2148
@jacksemenoff2148 3 жыл бұрын
@@shawnfan751 Thanks will look into it ,really appreciate your help.
@Tumbleweed5150
@Tumbleweed5150 2 жыл бұрын
When I click on the Dongle's "name" I get "Secured". It asks for a network key, which you didn't mention. ???HELP????
@ddalebeatyjr
@ddalebeatyjr 2 жыл бұрын
Exactly!!! Not even in the instructions, did you figure it out???
@Tumbleweed5150
@Tumbleweed5150 2 жыл бұрын
@@ddalebeatyjr Nope. I WAS going to order a second one for my remote system, but since I can't get the dongle to work with my main system, which I was hoping to be able to use to monitor my home system when away from home, I won't.
@ddalebeatyjr
@ddalebeatyjr 2 жыл бұрын
@@Tumbleweed5150 dang… well if we get it working I sure will post you back
@Tumbleweed5150
@Tumbleweed5150 2 жыл бұрын
@@ddalebeatyjr Thanks, I'd appreciate that.
@ddalebeatyjr
@ddalebeatyjr 2 жыл бұрын
@@Tumbleweed5150 well Sawn who posted the video, added in the instruction… the password to the WiFi is suppose to be 12345678 so silly it is not in the installation instructions provided by growatt. They make it so hard to give them a good review on great equipment when they can not supply a simple password instruction
@davidohalloran9607
@davidohalloran9607 10 ай бұрын
and right at the beginning my dongle is not flashing red. it is stable blue. this system is so terrible.
@9601885188
@9601885188 2 жыл бұрын
Without home wifi can not connected
@goaway7105
@goaway7105 3 жыл бұрын
it says ‘existing datalogger SN’ what does that mean?
@shawnfan751
@shawnfan751 3 жыл бұрын
It means this dongle has already been added into one account. You could check the datalogger list of your account. If dongle not there, it might be connected with another account
@crisraner7731
@crisraner7731 3 жыл бұрын
I'm stuck trying to connect to the dongle because it's asking for a password, how do I find out what the password is?
@shawnfan751
@shawnfan751 3 жыл бұрын
12345678
@louisdewin8586
@louisdewin8586 3 жыл бұрын
Hello Shawn, I have tried to connect the ShineWifi-S to a 7000TL3-S inverter (here the ShineWifi-S is the only option to connect. After installing, only the green light keeps burning. So the connection failed. To re-try making the connection, I should press the key button. But the key-button on a ShineWifi-S doesn't respond if it is in constand green mode, as is also stated in the manual of the ShineWifi-S. So, what to do now?
@shawnfan751
@shawnfan751 3 жыл бұрын
Hi, you could try to press the button one time to change the dongle into solid blue and then try the AP MODE method. Thanks
@syam562
@syam562 3 жыл бұрын
My wifi password contains special character hyphen. Will it create issue?
@bramcoteelectrical1088
@bramcoteelectrical1088 3 жыл бұрын
yes change it in router manger settings
@ddalebeatyjr
@ddalebeatyjr 2 жыл бұрын
OMG... the only thing which is the MOST important info... is what is the Password for the WIFI signal from the dongle???? I can see in the video a Lock Icon, but in your rush to make this video you had already typed it in and NO WHERE in the instructions does it tell you the Password for the WIFI from the dongle. How many message or phone calls does Growatt get about this pretty simple instructions would be helpful!
@shawnfan751
@shawnfan751 2 жыл бұрын
Check the video description
@ddalebeatyjr
@ddalebeatyjr 2 жыл бұрын
@@shawnfan751 thank you Shawn seem silly it is not in the instructions paper work that growatt supplies. Thanks for the update
@ddalebeatyjr
@ddalebeatyjr 2 жыл бұрын
@@shawnfan751 Thank You!!! The password worked we got it all connected!!
@MuhammadKashif-mg5mf
@MuhammadKashif-mg5mf 3 жыл бұрын
When you are using 2 methods. What you use pasword for connection with device .please respond
@shawnfan751
@shawnfan751 3 жыл бұрын
12345678
@MuhammadKashif-mg5mf
@MuhammadKashif-mg5mf 3 жыл бұрын
@@shawnfan751 I facing problem when try to connect shine WiFi device then he show the message it’s already exist serial number
@jesscatism
@jesscatism 2 жыл бұрын
My dongle is asking for a password 😖
@jatinjindal2528
@jatinjindal2528 2 жыл бұрын
What is the difference between model X and S ??
@shawnfan751
@shawnfan751 2 жыл бұрын
The port, -X using USB and -S using RS232
@jatinjindal2528
@jatinjindal2528 2 жыл бұрын
@@shawnfan751 no the difference between inverters .. TLS and TLX models
@shawnfan751
@shawnfan751 2 жыл бұрын
@@jatinjindal2528 Just the old generation and new generation. If you need more inforamation, you could search their datasheet.
@jatinjindal2528
@jatinjindal2528 2 жыл бұрын
@@shawnfan751 data sheets are very similar .. I was just purchasing the inverter and the distributer told me that s model is available .. the x model is out of stock
@byronbistro1698
@byronbistro1698 2 жыл бұрын
Hi Shawn,when connecting to the growatt wifi serial number network, it is asking me for a password. Have you had this problem before?
@jappahenk9459
@jappahenk9459 2 жыл бұрын
Same problem here...
@kruzel18
@kruzel18 3 жыл бұрын
What is wifi password to dongle hot-spot? On my Phone and Computer i need Key to Connect, its Security! Connection doesn't work without The Key and its impossible to Connect to 192.168.10.100.
@shawnfan751
@shawnfan751 3 жыл бұрын
Password is 12345678
@kruzel18
@kruzel18 3 жыл бұрын
@@shawnfan751 for SSID?
@shawnfan751
@shawnfan751 3 жыл бұрын
@@kruzel18 SSID is the serial number of the datalogger. Once you tap the button of the datalogger and the LED change to solid blue, you should be able to find it from your mobile WIFI list.
@kruzel18
@kruzel18 3 жыл бұрын
@@shawnfan751 SSID of dataloger is Security by Key... to Connect need have key. It is 12345678?
@shawnfan751
@shawnfan751 3 жыл бұрын
@@kruzel18 Yes
@drshel77
@drshel77 Жыл бұрын
where to but
@WiSeNhEiMeR-1369
@WiSeNhEiMeR-1369 Жыл бұрын
Thanks way too old ... but ... Thanks COOP ...
Growatt wifi dongle configuration tutorial
8:38
Growatt Inverter Troubleshooting Guide
Рет қаралды 33 М.
Best KFC Homemade For My Son #cooking #shorts
00:58
BANKII
Рет қаралды 68 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 51 МЛН
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 109 МЛН
Growatt Wifi Adapter Installation and configuration
11:07
Pawnee Off Grid
Рет қаралды 57 М.
WI-FI Connection Instruction for ShineWIFI-X and ShineWIFI-S
8:54
Growatt New Energy
Рет қаралды 83 М.
Growatt WiFi Setup
11:10
Ben's Garage
Рет қаралды 137 М.
Growatt ShineWiFi keine Cloud eigene Anbindung 👺
9:45
Der RC-Modellbauer
Рет қаралды 18 М.
Shinetech Tutorial: Growatt Shine WiFi-S/X Installation
8:54
ShinetechNewEnergy
Рет қаралды 104 М.
Configuration of Growatt WIFI-X datalogger in 5ghz / Hotspot mode
3:47
Best KFC Homemade For My Son #cooking #shorts
00:58
BANKII
Рет қаралды 68 МЛН