GS Tutorial GDS Wiring Guide

For this episode of GS Tutorial, we're diving into how to wire a GDS3710 with a magnetic fail safe lock and a door opening switch.
As always, you can opt for our how-to document found here:
tinyurl.com/y3...
Note: Depending on the type of door lock and switch you select to pair with the GDS, will determine which wiring diagram to follow. In our tutorial today, we're demonstrating the " “Fail Safe” Electric Strike, POE Power Supply" or diagram #3 in the guide.
Follow along and and hit pause or rewind if you need more time. Good luck and lets have some fun!

[@ronaldnexus2378]

Thanks for taking the time to do this. Nice job! I just purchased this system, hoping to integrate it to my Grandstream 3710 phone - here goes... Your video is super appreciated. Cool beans, -Ronald

[@danielalasa8375]

Thanks for the step by step wiring tutorial. Very helpful, appreciate.

[@tabous2]

Thanks for this tutorial, this scenario seems to be missing from the excamples, is it a combination of the first and second scenarios?

[@17som3ah]

Could you please guide me for a way of letting push button give more seconds in opening door from inside, I’m using GDS3710, megnatic and ZKTeco no touch button K2S

[@EduKSA]

Fantastic tutorial .. Hope you can lower the music.

[@gabrielsouza-xs6rf]

how many units can you put this?

[@waqasrajpoot8161]

Hi sir, With push button door not open the long time , plz any body solve this issue

[@wdahoi3153]

What prevents someone from taking out the device out of the wall on joining the two cables ground I'm positive to open the door lock?

[@khaledyuri1397]

Almost 6 years working in this industry, never happened. However you are right there is no guarantees

[@emreemery9538]

Well, with magnet system; if power lost, door(magnet) will release. but you can use rim strike, if power lost, door stays locked. also when ripped of the doorbell to touch the wires, you most likely lose power, therefor touching the wires will be useless. these doorbells comes in metal casing. it won't be easy.

[@wdahoi3153]

@@emreemery9538 even if one of those wires is power/ground?? The only way I can think is you may that cable connector so tight that that it would rip upon removal.

[@arjaya]

So if someone rips the gds3710 off the wall and touches the NC and Common wires together it will open the door!??

[@fabiosantoriell0]

Yes. But to open the gds3710 is a pain! at least 10 minutes

[@JS-tg7mw]

Awful tutorial, no actual info about what any of the connectors do or any variation in the setup, no fail safe diagram either, great