Tisas Night Stalker 10mm: Finally at the range!! Disappointed?!

A spicy twist to a well renowned platform of the 1911. The night stalker is a new edition to the marketplace and comes in a couple variants including caliber and other features. Our version up for review today is the 10MM. We have thoroughly enjoyed this range toy and look forward to what's to come from TISAS!
Smash that like and subscribe button before heading out and thanks for watching!

[@jeremyclementmusic]

I got one. It is INSANE. Very accurate and well built. I love it!!

[@GSquaredTactical]

Yes sir all forged. Thanks for watching and commenting and please be sure to subscribe if you haven’t already

[@scudrunneradv3269]

I recently purchased the Tisas Yukon carry in 10mm. This is my 4th 10mm I own. I have two different Springfield models and a sig x. I’ve put 625 rounds through it with the only malfunction caused by the Wilson combat 9rd mags. The mags have a small bump in the follower that the last round case catches on. A dremel tool quickly fixed it. Other than that it’s the most comfortable shooting 10mm I own. With the para ramped barrel it digests every variety of ammo I’ve put through it. I put 350 rounds through it on my first range day with it. My hand was just fine. It’s very accurate to boot. So far it’s held up well. Finish like someone else stated is pretty tough.

[@jeremyclementmusic]

Interesting, I had some other Government Model people tell me they had trouble with Wilson Combat as well and the consensus seemed to be either chip mccormick, or MecGar

[@scudrunneradv3269]

@@jeremyclementmusic I’ve read that the follower is the same one used in the 45acp mags and that the little bump in the follower is there because of the case on the 45. But on the 10mm it causes the last round rim to catch and can’t be stripped from the mag. I bought 4 of these mags from Wilson and all 4 had the same issue. Ground them off with the dremel and zero issues. Don’t like the fact I paid that much for something with Wilson combat stamped on it and then have to fix it.

[@GSquaredTactical]

Thanks for the conversation

[@scudrunneradv3269]

@@GSquaredTactical Enjoyed your review. Looked at that model gun before I bought the Yukon carry. Will be interesting to see you post some long term reviews on it.

[@GSquaredTactical]

Will do

[@forget-me-notlawncare9821]

I'm trading in two pistols on one of these. Both polymer frame and both Smith and Wesson. I have an M&P 2.0 4" 10 mm that has been nothing but trouble since I purchased it in December. I am very grateful to have found your channel. I'll be checking more videos out as I have subscribed and set up my notifications to receive all. Great job guys!

[@GSquaredTactical]

Ty sir. Trey isn’t with me anymore he got engaged, started a business and a family so he had to give it up. It’s me and my wife now

[@j0917DW]

Really enjoyed the video and the fact you ran a mixed variety of rounds. Subscribed! I will more thank likely purchase this pistol in the near future. Love the 10mm round. I had a RIA tac 2 1911 in 10mm but unfortunately was an absolute lemon about 5 years ago. I have a G29 which I love. Had the grips stippled and put in a heavy tungsten guide rod in it. It’s a pleasure to shoot considering the compact size of it. It has been 100% reliable. Again great video and y’all are very relatable.

[@GSquaredTactical]

I’ve had the G29 twice because I do like the compact size in 10mm but unfortunately with my short fat hands it was to fat in the grip and caused me to have failure to feeds for not being about to hold on to it. Thanks for subscribing

[@j0917DW]

@@GSquaredTactical lol I understand completely, it’s like holding a 2x4! One of the reasons I would like to have another single stack 1911 in 10mm. Keep up the great work.

[@GSquaredTactical]

Ty

[@dougmac9955]

I have two Tisas 1911s. A 9mm Stingray an aluminum framed Commander sized gun with the bobbed grip. And a 9mm Nightstalker. I do believe you guys have convinced me to go ahead and get a 10mm Nightstalker. I have at last count 18 1911s in my collection. And I would have to say that these two Tisas guns are the equal of any of them including the two Colts. I don’t have any high end 1911s the two Colts would be the highest rated in my collection, but I would sell either of them before these two “cheap” guns. And the malfunction you had with the 40 Short & Weak, I personally wouldn’t count that as a malfunction anymore than I would when my Astra 400 has a feeding issue with 380s. Love your videos keep them coming.

[@GSquaredTactical]

Sounds sweet follow us on facebook and share some photos of them beauts.

[@destroyingdadxx2274]

Great job. Love them Tisas guns. I have a D10.

[@GSquaredTactical]

As the corn flakes tiger says “they’re greeeaaaattt”! Thanks for watching please subscribe if you haven’t already

[@highdesertutah]

“Except for the Kimber. And then it was like 500 rounds. And then it was like, maybe…” 😆

[@GSquaredTactical]

No kidding Kimber won’t get anymore of my money lol. Thanks for watching and commenting and please be sure to subscribe if you haven’t already

[@supernamic]

@@GSquaredTacticalamen to that

[@scoutndad1941]

@@GSquaredTacticalI’ve never owned a Kimber but many times a buddy has a problem with them. For what you pay it should function and cycle much better. I love my 2 .45 1911s (a RIA and Sig Nightmare) and have been torn on getting a 10mm. I can’t get back on target with a Glock 20 abd can’t afford a Colt Delta Elite. This Tisas might fit the bill that to this video. Cycles well, accurate, tritium front sight, ambi safety for this southpaw, and sharp looking cerrakoting. Looks like a great value.

[@GSquaredTactical]

@scoutndad1941 absolutely it is I’ve never had a single issue with any Tisas ever. Thanks for watching and commenting and be sure to subscribe if you haven’t already

[@bobyjones3905]

I have several 1911s never had a break in except with my Kimber 2 magazines one FTF lubed The slide ran flawlessly since then .

[@GSquaredTactical]

Yeah Kimber 1911’s piss me off with that stuff

[@tthomp57]

I just got a 9mm DS carry model. The company pronounces it (T-Sash). I love it. It's at the gunsmith now getting a few little things done. Mine has about 500 rds now. It still shoots a little low for me but I'll be getting that fixed soon. All forged parts for this price is just amazing! I'm tired of these polymer wonders I've been shooting since the early '90s. Time to go back to the steel guns I grew up on!

[@GSquaredTactical]

I agree with this totally. Thanks for watching and for commenting and please be sure to subscribe if you have not already.

[@viperdemonz-jenkins]

I just say T sauce.

[@GSquaredTactical]

That sounds ghetto lol

[@foggymountainman9138]

Thanks guy's Good review and the price is right 👍🤝

[@GSquaredTactical]

You said that right!!

[@ralphgreenjr.2466]

I bought one today, $499.99. I have owned/carried a 1911 for 55 years. I can state with no reservation the fit and finish of the pistol is excellent. I disassembled mine to clean and lubricate it and reassembly was very time consuming as the parts fit exact. This is not a GI mix master. I now have to take it to the range for the final verdict. If it ever stops raining in Ohio!

[@GSquaredTactical]

I believe even after the range you will come to the same conclusion. Thanks for watching and let us know what you think. Please be sure to subscribe if you haven’t already

[@jaxwins]

If you mind me asking, where did you get one for 499.00

[@GSquaredTactical]

PSA in Denver NC one week after the recall was announced

[@jaxwins]

@@GSquaredTactical Thanks!

[@RagingBee1]

I’ve this one for a few months now with no issues. I changed the grips with some G10 and it has become one of my favorites at the range.

[@GSquaredTactical]

Yeah the grips look sexy but aren’t really functional as they are slick as owl crap. Thanks for watching bro and be sure to subscribe if you haven’t already

[@lens7859]

Hard to believe that you can get all that for under 6 beans. Fantastic

[@GSquaredTactical]

It is jaw dropping

[@KeanonGilliamSlang369]

Kimbers are the only 1911's I've heard of that had to have a 500 round break in period. In some cases true. Hell, my Sig Sauer 1911's didn't require didn't require a break in period and they're not know for 1911's. Nice review guys!

[@GSquaredTactical]

Thanks brother see you soon!!

[@D-Mag]

The last two Kimber’s I bought had to be sent back to make them function correctly. Still don’t trust them. I’m done with Kimbers!

[@GSquaredTactical]

Yeah Kimber is hit or miss which such because they are beautiful well made 1911’s

[@brianscustomcanvas1911]

If you really like 10mm. I got a Tisas Yukon C10 carry commander 4.25" black and green/ greyish. Has all options you could possibly want and no mim parts. Mines 100% love it.

[@GSquaredTactical]

I’ve never had an issue with any Tisas I’ve ever owned.

[@gastandingbear]

I have that gun in 45acp and put nice G10 grips on it and it really makes a world of difference in the grip and.

[@GSquaredTactical]

No doubt a set of honeycomb grips or G10 would make a world of difference. Love the look of the factory one so I just suck it up for the look of it lol. 😂 Thanks for watching and commenting and please be sure to subscribe if you haven’t already

[@Milkman3572000]

Mine did not run well. I had a new Wilson extractor and heavy recoil spring... Seemed to solve my issues. That sorta fix isnt rare. NOW I am enjoying mine. I'd bet most 1911 people have both those spare parts in their range bag.

[@GSquaredTactical]

Well ours is still running g strong but glad you got yours running right now. Thanks for watching and be sure to subscribe if you haven’t already

[@doughoward7183]

I want to see some reviews of the double stack coming out. I really want one but would like an evaluation of trigger pull and some information on the magazines

[@GSquaredTactical]

Yeah I want the DS to but can’t find it. Looks awesome for about $1200 or something. Thanks for watching brother

[@doughoward7183]

@GSquaredTactical I saw it would be prices at $799 msrp for carry version and $950 for the Nighthawk vatiant. I hear it will be on the market in the next month or so.

[@GSquaredTactical]

Man I hope you’re right. The only one I saw some channel was that shot show doing a review and said the MSRP was $1299. Which usually means it sells for 100 or $150 cheaper than MSRP so I figured it would be somewhere around $1049 to maybe $1199 but if they come in that cheap I might buy two lol

[@scottwinand5946]

​@@GSquaredTacticalthe DS models are listed on the Tisas USA website for the Nightstalker $959 msrp and the Duty and Carry models are $799 msrp

[@waterhead1359]

I have a ria 1911 9mm gi , with some holster wear. I rattle canned it looks great

[@GSquaredTactical]

Well whatever works

[@foggymountainman9138]

Cool.im in the market for a 10mm. This will be interesting 👍

[@GSquaredTactical]

You won’t regret it

[@CreasyEQ]

Big difference from shooting 10mm 2 .40 caliber 💯. I like this gun 😊

[@GSquaredTactical]

I have a feeling that we arnt the only ones that like it, it’s gonna be a top seller going in to 2024, just a hunch. Thanks for watching and please subscribe if you haven’t already

[@phxamigo]

My biggest gripe about 10mm 1911’s ,or any 1911 is when they lack front strap checkering!!!!

[@GSquaredTactical]

Me too like the single biggest. SA had disappointed me with that. Thanks for watching and commenting and please sure to subscribe if you haven’t already

[@jasonpearson-tu6yz]

Just picked one up for 439.00, crazy deal from PSA

[@GSquaredTactical]

Yeah my great deal

[@daniel-eo3rz]

I think they just recalled these! Id check with the company.

[@GSquaredTactical]

Yeah ours has already been sent back and fixed and on its way back. Thanks for watching and for the heads up. Please be sure to subscribe if you haven’t already

[@daniel-eo3rz]

@@GSquaredTactical Yes sir no problem. I'm really wanting to get one of these pistols I think. I loved your video and I did subscribe. Thanks for all the info!

[@GSquaredTactical]

@daniel-eo3rz ty

[@countryboy1534]

Have you considered getting the Tisas Yukon in 10mm and making a video?

[@GSquaredTactical]

We have not but we will look into it, thanks for the recommendation

[@stefanfful]

Looks like a shooter to me.

[@GSquaredTactical]

Yes sir it is. Thanks for watching and commenting and please be sure to subscribe if you haven’t already

[@bobyjones3905]

What’s your opinion on the rock island

[@GSquaredTactical]

It will rust and bad if you don’t watch it regularly but they do run. I’ve never had one that failed me regularly

[@bobyjones3905]

@ thank you

[@lens7859]

Love my Tisas , good shooters

[@GSquaredTactical]

Yes sir

[@dudespin]

Looks like Hickoks neighbor! I saw videos that you can shoot 40 sw on a 10 mm. I don’t like the night stalker name but very nice pistol.

[@GSquaredTactical]

It is super sleek and elegant. Thanks for commenting and please sub up if you haven’t already!

[@frankreinhardt441]

Wilson Combat and Les Baer also recommend a break in period and say to run wet. Any gun that has tight tolerances have a break in period. A gun with loose tolerances, like your cheaper 1911s, dont have a break in period.

[@GSquaredTactical]

Would it stand to reason that after your Nighthawks, Dan Wessons, Custom Kimber’s, WC (all of which I have) would have loose tolerances once they are “broke in?” So the “cheaper ones” are already broken in. This Tisas has zero MIM parts which is unbelievable at this price range. I wouldn’t be dismissive of it as I have had several and they all have been awesome. Thanks for watching and commenting and please be sure to subscribe if you haven’t already

[@frankreinhardt441]

@GSquaredTactical No, breaking in is tight fitting parts wearing in together so it operates like glass. Not a sloppy built pistol that starts out already sloppy. Chepstow forgings can actually be inferior to quality MIM made parts. You know jet engines have MIM parts, so does the car or truck you drive, like crankshaft and cam shafts.

[@GSquaredTactical]

I understand where you are coming from and I can speak educated on the matter because I have high end 1911’s one being 5k. However, I’m not a gun snob because I’m blessed to have higher ends guns and I’m not dismissive of those who want the 1911 experience, but don’t have the luxury of spending $1200-$5000 to get the very best. The point of the video is that there are quality options if you fall in that category and not me trying to peddle garbage at the sake of low price. Not saying that you are saying that at all just trying to explain the point of the video.

[@bigracer3867]

Oh yea!!!🎉🎉

[@GSquaredTactical]

A beaut!!!!

[@viperdemonz-jenkins]

my comment got denied and I said was I ordered this is 10 and want the doublestack threaded barrel 9 version but I live in WA state.

[@GSquaredTactical]

🤦🏻‍♂️

[@Razcal1x]

Bought the double stack..... smooth as silk!

[@GSquaredTactical]

I held the double stack 3 times in one day at a recent gun show but I had already spent $950 that day and just couldn’t bring myself to do it. Thanks for watching and please be sure to subscribe if you haven’t already

[@Razcal1x]

@@GSquaredTactical I put the SS barrel in mine too....Looks cool, fit right in! Great Pistol.

[@GSquaredTactical]

Yes sir

[@jeffreylocke8808]

If I got one I would get it quad ported by Mag-Na-Port.

[@GSquaredTactical]

I always buy WC mags or already have them lol

[@JoeWoodell-u6p]

“Stalking at night” lmao!!

[@GSquaredTactical]

No better time to stalk lol 😂. Be sure to subscribe if you haven’t already

[@gl0bal7474]

that recoil looks.....substantial

[@327Federal]

10mm is a hell of a round

[@GSquaredTactical]

@327Federal yes it is indeed!

[@GSquaredTactical]

Please be sure to subscribe if you haven’t already

[@matthewcritchfield6997]

I just watched a video two hours before this one they talked about this company, and like eight of their models are being recalled Pretty sure I saw this one on the list

[@GSquaredTactical]

Yes we’ve already sent ours back and it has been fixed and on its way back. Thanks for watching and for the heads up. Please be sure to subscribe if you haven’t already

[@craigbates2095]

I got an email last week from Tisas that some of the Nightstalkers in 10mm and .45 were recalled.

[@GSquaredTactical]

Yes sir they have been I sent mine back 3 days ago. No reported issues they are just being cautious. Call the number and they will run the serial and see if it needs to go back

[@Bass.Player]

Some had hammer follow problems so they say...

[@GSquaredTactical]

We sent ours back and received it back in about 2 weeks with a new trigger the paperwork says. Thanks for watching and commenting and please be sure to subscribe if you haven’t already

[@dickeymoore3662]

Does this Tisas have any MIM parts if so what are they?

[@GSquaredTactical]

We have been told my the manufacturer it’s all forged no MIM parts. Thanks for watching and commenting and please be sure to subscribe if you haven’t already

[@dickeymoore3662]

@@GSquaredTactical dammit Boy

[@GSquaredTactical]

Ikr

[@That_1_Outcast]

I have the night stalker in 45 which I just ordered the parts to upgrade the problem part(s) since Tisas never sent me the shipping label after giving them the recall form Update: Just picked up my night stalker 45 ACP from my local gunsmith to have the recall issue fixed and a couple parts changed out with wilson combat bullet proof parts

[@GSquaredTactical]

That’s wild they literally sent me a prepaid label. Within 15 minutes of me submitting the form. Thanks for watching and for commenting and please be sure to subscribe if you have not already.

[@That_1_Outcast]

@@GSquaredTactical I just got the email for the shipping label through fedex but don’t have any fedex drop off locations near me except for an hour away from home, I’m just gonna stick to my plan and repair my 1911 myself

[@GSquaredTactical]

@That_1_Outcast I hope all goes well for you! Nobody will take better care of it than you

[@silverback8183]

So what are the parts that fail? I literally just bought one today,looked it up on KZbin and found that's its got a recall....that the gun shop didn't bother telling me,and yeah I'm pizzed! I looked on line but couldn't find any info on a fix.

[@GSquaredTactical]

@silverback8183 you just have to call them and they will send you a prepaid. FedEx label to send it back to them. They had mine about 12 days and the work order just said they replaced the trigger.

[@gastondraco5906]

This before or after the recall was announced??……..you didn’t mention the flaw at 18:31 dude went to pull the trigger and it didn’t fire …slide didn’t lock back on last round I’m thinking

[@GSquaredTactical]

Before the recall, we didn’t know if it until a couple days ago. We have since sent it back to Tisas. Please subscribe if you haven’t already

[@luvzk9]

Flaw? He already fired 8 shots, so it was empty. Slide didn't lock back probably because he was using .40 cal. Gun is made for 10mm, can't blame the gun when you use improper ammo.

[@GSquaredTactical]

We full well expected stove pipes or lock back issues shooting .40 cal especially on a 1911 and we even said as much. I don’t understand why people get their panties so knotted up about things. Good grief I didn’t say anything bad about the gun you might have bought. You can feel confident in your purchase

[@mic187x2]

What store did you get this from?

[@GSquaredTactical]

PSA we were lucky enough to find one. Not an easy find though! Please subscribe if you haven’t already and thanks for your support

[@lenholt7419]

You fellas sure do appear to be having fun. I am researching about their latest offering in a Double Stack. Impressive out of the box performance on this one. What's that sound? Springfield flapping their mouth..TRP, FBI, Front Strap, Serrated Top, blah blah Commander Blah blah Ask the question. How about those internals and did the custom shop build them? Meekly kinda under their breath mim... I see a marketing campaign. Meanwhile everyone has a problem with where Tisas are built. In some places,, they are AK guys too. smh. I may have to pick one of these up.

[@GSquaredTactical]

I know that the barrels in their guns are forged. However, we have also been told by the manufacturer that there are no MIM parts in their guns, and if that is indeed true, it makes the price tag on these guns all the more impressive. We have owned three different offerings from Tisas over the years, and I can’t recall having one single failure of any kind with any of them. Personally, I’m becoming a big fan. Am very interested in the new double stack and have been intently looking for one. Please be sure to subscribe if you have not already and thanks so much for watching.

[@AgtKruger]

More videos of 10mm please.

[@GSquaredTactical]

We have quite a few just search what you are looking for on our channel

[@Aviation_Professional]

Bunch of Tisas recalls this weekend I see

[@GSquaredTactical]

Yeah unfortunately but they have good customer service! Thanks for watching and please subscribe if you haven’t already

[@heywoodjablome2018]

So I picked up this exact pistol from Cabela's. It says it had two 8 round mags but they actually hold 9 is that true for you as well?

[@GSquaredTactical]

You got the 10mm version? Is so mine will hold 9 if I really push it in there like really fight with it but if I do it won’t feed from the mag on first round and is hard to even seat the mag. I’d stay with 8. Thanks for watching and be sure to subscribe if you haven’t already

[@heywoodjablome2018]

@@GSquaredTactical yes sir the 10mm, same one in the video. Your video initially helped me before I purchased it. I loaded it by accident initially pre loading watching TV before the range.

[@GSquaredTactical]

@heywoodjablome2018 well it will fit 9 but usually not easily. The 9mm version will get 9 or 10 rounds in the mag. I guess if the mag seats in the gun see if it will function. One extra round is a good thing lol

[@manggonim9864]

It doesn’t have threaded barrel. I mean the pistol chambered in 10mm.

[@GSquaredTactical]

I’m not sure what you are referring to can you elaborate please l?

[@realtalk6195]

If either Tisas or Girsan makes budget guns in .30 Super Carry, it would really help popularize that round and even bring the prices down as demand goes up leading to more manufacturers making the cartridge.

[@GSquaredTactical]

I’ve never owned a .30 SC. Thanks for your thoughts and for watching. We appreciate the support and hope you will subscribe if you haven’t already

[@foggymountainman9138]

I'll tell what I know about guns they are like a woman. You don't really know nothing about them till you squeeze them a few times .😅

[@GSquaredTactical]

lol I suppose that true

[@AB-kg6rk]

Tee-shash

[@GSquaredTactical]

Yep wondering when that would happen lol

[@GSquaredTactical]

Yep

[@richvest7212]

Tisas is great, but we don't need another unobtainable calibers If it ain't 9mm or 45 "it just aint"

[@GSquaredTactical]

10MM isn’t the worst ever, it’s formidable and good for big game. It’s a pretty fun round if I do say so myself. Thanks for watching and please subscribe!

[@harleymcvey9141]

Shouldn’t be disappointed, just fix your grip and learn to shoot better…..

[@GSquaredTactical]

Dude what the literally heck are you talking about? Did you even watch the video? I know the answer to that. You didn’t!! Because if you would have you would have saw about 150 rounds of a completely flawless gun that was accurate and the title was just a play on words. You must be a super troll. Like their leader or something. Dude going to take a jab by looking at a title and didn’t even watch the video. Move on troll.

[@MikeNeal-z8u]

“ gun experts “ 😂 y’all are a dime a dozen on KZbin

[@GSquaredTactical]

Yep and Cheeto eating mom’s basement trolls who think they know something or a dime or dozen too. Just as long as we keeping it real.

[@GSquaredTactical]

Plus, where did I say I was an expert. I’m just curious if maybe I had an out of body experience and said something I don’t remember saying

[@OneinthaChamber]

The finish comes right off. Just holstering it for a little bit rubs it off. Gets kinda ugly. My major complaint is how ‘tight’ it is to rack. Was watching these videos on the Nighthawk to see if others had complained about it. I’ve put around 200ish rounds through it. Cleaned and oiled it 3x now…hasn’t gotten any better. I own a lot of firearms and quite a few 1911 frames…it shouldn’t be this tough to rack

[@GSquaredTactical]

Yeah when companies make “budget friendly” guns they usually skimp on the finish no question

[@robertross3358]

Did you guys really shoot .40 S&W through the 10mm Night Stalker ? Or did you just mean LIGHT 10mm loads ?

[@GSquaredTactical]

All 10mm is light compared to original SAAMI standards for 10mm, but no we actually ran .40 S&W through it as you can with just about any 10mm

[@GSquaredTactical]

Thanks for watching and please be sure to subscribe if you haven’t already

[@robertross3358]

Cool ! I always thought it would be worth a try to run .40 S&W through a 10mm auto , but doesn't the round index in the chamber on the mouth of the cartridge case ? You didn't have any failures to fire or any light primer strikes ?

[@GSquaredTactical]

On some guns yes. Like on this gun and our FN-510 there was no problems but on the S&W M&P 2.0 10mm it would occasionally stove pipe because the round is shorter

[@mikevm1981]

40 S&W can be fired in 1911s chambered in 10mm, but to do so means that the case is headspacing on the extractor rather than on the case mouth. Accuracy may suffer, and if it's done frequently it may result in extractor failure

[@bobyjones3905]

I have several 1911s never had a break in except with my Kimber 2 magazines one FTF lubed The slide ran flawlessly since then .

[@GSquaredTactical]

Kimber gets me with those break ins