Gsxr anti theft bypass (stealing your own bike)

[@grantwinkelbauer1120]

My bike got stolen now its been found trying to find/fix the ignition switch has been a nightmare thanks for helping me get my bike on the road

[@sevaslee4865]

You figure it out

[@PS-dn3tz]

Hey, I just want to say thank you for helping people out because sometimes we need to help in hand I found your videos to be very informative and concise. Good job!

[@thebeardedgingerontheinter3256]

100 ohms resistor

[@austincassell7273]

I'm trying that method right now! Any tips??

[@AngryHerby]

100ohm, 1/2 watt, 5% tolerance

[@RichieLouisVuitton]

Your a legend 😂😂😂 thanks buddy

[@banan5297]

i love you so much this just relieved 2 days of frustration

[@bilbobaggins4710]

Thanks brother... Stole 5 bikes since viewing this awesome video 😁

[@yungoldhead5600]

I'm on bike #15 now lol

[@johnconnersmithllc6095]

Critical Thinker.. you are the guy on my video pushing my bike down the road

[@kevinhumphrey932]

Can a variable resistor be used to find out the resistance that is stored in the ecm I purchased a pull out engine and I didn't get the switch with the engine and harness assembly

[@azrinaziz7088]

Damn man

[@motorich]

Thanks for your concerns Karen. It's people like your that make others hesitant to help. Most bikes are stolen and parted out. Not ridden. Nobody is trying to hiotwire a bike in a parking lot. They are just throwing them in the back of trucks or vans. Dumbest comment award

[@famouseazy]

2013 gsxr 750 was stolen got it bck but the ignition was damage i try doing a switch with a resistor but it won’t start getting spark, fuel & air all it do is crank even try starter fluid still don’t start bike isn’t getting any code don’t know what else to do

[@72H2750]

Cant figure out if the guy wants u to use the existing starter relay or wants u to use a different relay? Shud the stock relay wiring be left intact? Just confused Thx

[@brianmanzi5084]

Damn bro you really opened a can of worms with this video but on the brighter side if you charged each person just to run it down to them over the phone you could buy yourself a shiny new bike

[@nolamike1982]

Say bro i got one of those amazon aftermarket ignitions for my 04 r600 it had 2 tabs inside by where the wires go into i was told to solder a 100omh resistor between those two points but it still wont prime the fuel pump... What am i doing wrong? The aftermarket ignition also has totally different color wires than the bike wiring or some of the aftermarket ones ive seen online. I just downloaded the service manual gonna study the wiring and see if i can figgure out whats going on... Do you have any experience with these new aftermarket ignitions with the 2 unsoldered unconnected tabs on that wiring plate inside the ignition?

[@561drew2]

when i did this, i didn’t have power to my orange wire with yellow tracer, but everything else had power. no clue what’s going on

[@johnnymenchinella5922]

Will it work on a 2002 Ducati bought a bike have one key power's up won't start have to get it home?

[@buyerenogurlfwendo2106]

They didn’t implement the resistor until 2004.

[@fernandofaneite5349]

Good morning friend, I found in your KZbin channel that your motorcycle presented electrical problems generating the C42 code, could you tell me how it was that you solved it since my motorcycle is presenting me the same error code and does not turn on

[@angrygnome4779]

Does this work on a 94 gsxr750? I have no spark. Previous owner put a new ignition on he bought from Amazon and I don’t think it has the resistor in it. So my question is are the wire colors all the same on all Gixxers? I don’t want to cut wrong one.

[@sevaslee4865]

U ever figure it out

[@buyerenogurlfwendo2106]

They didn’t implement the resistor until 2004. Maybe they just used the wrong part

[@JungleBadMan]

hey bro, i lost my remote key gsx r 600 k9. original key that plugs in remains. i got another remote key, can i programm it somehow without the original one?

[@riaanvandermerwe4079]

Gsxr 1000 k5 , resistor in factory ignition faulty, want to still use this ignition but bypass alarm, please advise if possible

[@jamesnelson7179]

no key took out ignition and tumblers so i could start it with a screwdriver everything comes on but it gets no spark is that the resistor doing this shit im going crazy what resistor do i use HELP

[@robcormican2360]

no, the resistor just shuts down the fuel pump. sorry for being 5 yrs late

[@fernandofaneite5349]

Please explain to me the written procedure of how I should make the arrangement

[@towtips6474]

06 gsxr600 I know this has happen to someone else not just me lol. . . In my key ring only the plastic SUZUKI key holder was left the actual key came off. Need help can i get a resistor from an appliance ? Radio or DVR ?

[@robcormican2360]

The resistor itself is in the ignition switch. the part that you put the key into. BMWs have a resistor in their keychain. And as far as I know, that's it. I'm pretty fairly certain that Suzuki does not have that technology. so as long as you don't cut the wires and you can drill your ignition out and turn it, It should start theoretically. Or if you use a jiggler key or if you get another key made. The key doesn't have the anti-theft chip in it. In fact, there isn't a chip. resistor itself is inside The ignition and as long as that ignition is turned over it's going to work as far as the resistor is concerned

[@diegorodriguez5106]

Hey man 07 gsxr 750. Got rid of the code resistor in place and but now my ignition doesn't get power to start it up plz help

[@DRKKNTRACING]

I believe with that year the key has to be married to the ecu so usually the resistor don't work.

[@bigandstrongbigandstrong1603]

@@DRKKNTRACING thanks bro.

[@crashnburn3980]

I'm going to have to add a resistor to one of my wires to drop the voltage from 12v to 1.4v like the factory switch on my 2000 bandit 600

[@brandonthorne4368]

would that be the same on the 2000 gsxr 600 srad im lost cant figure it out for the life of me

[@crashnburn3980]

@@brandonthorne4368 id say it would probably be the same, not sure if the wire colors would be the same or not

[@georgehambric6]

I need to know what color wires on ur bandit u added a resistors

[@crashnburn3980]

@@georgehambric6 For the aftermarket keyswitch I think the wires were different color from the factory one. But on the factory plug from the bike maybe it was orange and yellow I can't find a picture right now

[@papabear9585]

will this work for a 06 gsxr600 there is like two of every wire in there i saw two yellow two org one black one white and brown

[@staticstreamer7962]

I I have an 01 katana Suzuki my ignition has already been pulled due to lost key and been messing up lately so I cut the wires and am wanting to wire it to a toggle but I don’t know which wire my resistor needs to connect too and which ones need to go to hot side vs ground side of toggle

[@DRKKNTRACING]

Best thing to do is get a wiring diagram and find out which is the ignition switch and look on forms tosee if a resistor is required

[@stickboyjones]

I traded a car for a 98 katana 600 and the ignition was all types of fucked up so I got a aftermarket ignition but the connector on the harness side was cut and I have no idea how to hard wire it would you know how to do it?

[@DRKKNTRACING]

kzbin.info/www/bejne/nKPCd4Snir6Ko7c

[@DRKKNTRACING]

This is a newer version

[@DavidJones-ty1ht]

Ingition won't turn anything on until I mess with ingition connection? Gen 1 Busa? Fuse's are good

[@rhinorhino-io3bs]

Hey man I was watching your video and I was just trying to see what size resistor that is because I was having problems withy

[@MoodSwingZX]

Id like to clone a key... Is there a way to do it like in honda his?

[@lialcarey5467]

I'm trying to put my bike on the track.. I have already ordered a new switch but I'm trying to get the bike fired up to see what all parts I'll need

[@DRKKNTRACING]

What year make model cc

[@lialcarey5467]

09 gsxr1000

[@DRKKNTRACING]

I believe that year the chip is in the key so this wont work

[@jamesnelson7179]

NOBODY WOULD STEAL YOUR BIKE IF YOU LEFT THE KEY IN IT WITH A FREE SIGN ON IT

[@noonefan]

I replaced the ignition with an aftermarket ignition. I had to do add the resistor to the anti-theft to get it start. Now the dash, headlights, indicator lights, and horn won't work. Any ideas?

[@DRKKNTRACING]

What year

[@cristianhernandez-kl9vg]

I have an 03 gsxr that was stolen, I got it back swapped ignition and now when my wheel is unlocked and key on turn position no lights will go on. But when steering wheel is locked my lights will come on any idea?

[@DRKKNTRACING]

Sounds like the ignition switch has a short

[@cristianhernandez-kl9vg]

@@DRKKNTRACING should I order a new oem one?

[@DRKKNTRACING]

@@cristianhernandez-kl9vg honestly try wiring it up like in the video. 100 ohm .5 watt resistor or trace the ignition harness wire to see if you have a short.

[@mattstevenson7781]

Hi did you ever figure out what was up with this? I am having the same problem with my 2000 bandit 600, only get parking light while in ON position but all lights, horn etc when in parking position

[@williambennett6243]

I started watching this cuz something is wrong with the wiring on mine someone stole my bike I got it back an now it won't start an the wiring is a mess I'm in need of help with wiring ughh

[@1billyknorr]

Oh my God bro literally top 10 most confusing video of all time The other orange on this side with the yellow orange over by the elves and then you got to go to 17 and the letter seven smells like what fuck bro

[@joshm8840]

Hey boss what resistor are you using

[@DRKKNTRACING]

100 ohm, 1/2 watt, 5% carbon

[@biscuitlee1184]

Bro I can’t understand this for the life of me what year is this for?

[@DRKKNTRACING]

Biscuit Lee 01 thru 06 1000 and 01 thru 05 600/750

[@jesussantos5948]

Una pregunta esa conexión me serviría para una Suzuki 1000 modelo 2002

[@donaldlindsey8567]

Hey buddy I got a 2003 GSXR 750 I've had for 6 months and I'm not getting no spark to my spark plugs and I just ran across your video I have some resistors can you tell me what they are the numbers

[@DRKKNTRACING]

100 ohms 1/2 watt 5% carbon.

[@sammyjohanson3653]

And where did you get yours? I live in ca and can’t find them anywhere besides online and I want to get them at a store,and thank you in advance!!

[@DRKKNTRACING]

I got mine online. Know one locally carried them.

[@joead5739]

My 750 project I’ve bought it’s immobilised k2

[@andrewilliams1981]

Hey anybody who can help. I have a 2003 1300r and when I bought it I lost the key and since I’m in a rural town we don’t have access to a locksmith. I bought a aftermarket ignition switch because budget won’t allow a $150 OEM. The bike starts but won’t crank and I’m getting the C42 code. I have no ideal how this whole wiring thing works can someone help with a diagram or something

[@jonathanodom5718]

I have a 07 gsxr 750 and I lost the only key for it would I just buy a new ignition online?

[@DRKKNTRACING]

I would probably talk to someone at a dealership first

[@cedricalexander9274]

So which wires r the resistors connected to cuz u just give the colors not the wires names.

[@DRKKNTRACING]

Cut Solid orange wire on ignition harness close to the wiring harness plug. Cut Orange with yellow stripe wire close to the connector. Install a 100 ohm .5 watt 5% carbon resistor on the solid orange wire closest to the connector. Connect the other side of the resistor to the orange with yellow stripe closes to the connector. Run a wire from the orange/Yelleow wire with the resistor to a toggle switch. Connect the other side of the orange wire (ignition side) to the other end of the toggle switch. Reconnect the plug to the harness, flip switch on, and push start button. You do nothing with the Orange/yellow wire on the ignition side.

[@user-gx4dw2yz4t]

Hey brother jw if this works on my k5 I got 7 codes no spark no prime, I bypassed the t.o. with a 150 1/2 5% but still nothing

[@JaydenVinson-zq7zr]

Did you fix the bike

[@richardcramer5988]

thank you I been trying to find this out,I got a 05 gsxr 1000 motor and I been trying to get it to work in a sprint car!!!

[@DRKKNTRACING]

It took me a few days to figure it out when I did ny motor swap.

[@JoseGomez-mc5ol]

Same here

[@ArthurPrice-cm7om]

100 omh 1/2 watt 5% resistance

[@UndefinedAffliction]

Hey man I have a similar problem on my 01 sv650. Long story short attempted theft they cut the green connector from main harness to ignition. I bought a new ignition, tried to wire it and nothing, discovered said resistor tip. So your video ki d of answered this, but if I want this to work exactly like the OEM key on ignition do I follow this with the resistor tied in or do I have to redo the whole wiring like you did here? Reading everything online states that if you do the resistor method, it makes it more of a track bike, ie no fans, headlights, signals, horn, or gauges. Just trying to figure this out to ride again been at it 4 days and dont wanna drop more money on a shop to rape the wallet

[@DRKKNTRACING]

My lights worjed like normal but I had a separate switch for my fan. You can wire the fan so that it works like normal.

[@UndefinedAffliction]

Solid. Thanks for the walkthrough man!! I'm going to try this today and see what happens.

[@adavis1326]

Did you even need the resistors if you use the relay

[@jamesmanners8506]

this has help me with my track bike just had c42 thanks

[@craigr306]

Same feeling really boils my piss.

[@KingGem24]

Ok.thanxx.does the ignition have to be disconnected from the harness or not

[@johnconnersmithllc6095]

Would you show me if I send you a picture of my ID and my title or some s*** cuz I don't steal but my f****** bike is pissing me off and I think it's been the ignition the whole time.. I was thinking it was all these sensors or the rectifier or all this other s*** and I'm seriously ready to burn this thing dude if I don't get it started by tomorrow

[@DRKKNTRACING]

100 ohm at 1/5 watt 5% carbon resistor

[@mikmak724]

I am having problem om gsxr1000 k6 i shorted by accident the live feed into ecu and ign comes on but nothing happens when i turn on killswitch and i notied the red light on dash for transponder donesnt come on , it only blinks when ign off so i guess the ecu wont recognise key , do you think i can do your fix or is ecu bad, Thanks

[@DRKKNTRACING]

Have you checked all of the fuses including the ignition fuse on the starter relay.

[@jamesnelson7179]

YEA I WOULD WAIT TILL TOMORROW TO SHOW HOW TO HOOK UP A RELAY IT WILL TAKE YOU A FULL DAY TO EXPLAIN ITAND IT STILL WONT WORK

[@DRKKNTRACING]

It depends on the year. 01-03 use a ground instead of a positive

[@rossingram6088]

IV tried this having issues with my track bike and can't get fuel pump to work

[@DRKKNTRACING]

What's the make, model and year of your bike?

[@rossingram6088]

Gsxr 600 k5

[@DRKKNTRACING]

Does everything else work, just the fuel pump won't prime?

[@DRKKNTRACING]

And your doing the resistor to remove the key?

[@michaelbailey4137]

Do have to have the ignition on it with this setup? And do u have to have the black box i have a 01 gsxr600 on a warrior and want to put the 4wheeler key switch on

[@jaybourbon6169]

You ever figure this out? I got a 02 blaster stretched with an 03 gsxr 600. Just bought it. The guy lost the keys and tried to hit wire it., No spark.

[@michaelbailey4137]

wee ew no my motor ended up spinning a rod bearing

[@rickybritish]

hi I dont know if you could help me please,I have a yamaha R1 2004 and want to install a remote start,some people used resistor some just connect the 2 wire so you could start the bike with remote.do you know anything about remote start,and can you tell me how to choose the correct resistor

[@DRKKNTRACING]

As far as hooking up an remote start I really dont know much about it. As far as the resistor its a 100 ohm resistor.

[@rickybritish]

DRK KNT RACING thanks bro

[@rickybritish]

DRK KNT RACING on a Yamaha R1 2004 do you know which 2 wire i don’t want to cut them just replicate the resistors I can remote start the bike,I will connect one side in the yellow and the other in black

[@DRKKNTRACING]

I would get a wiring diagram of your ignition and see which wire is the signal wire for the ignition

[@rickybritish]

DRK KNT RACING i have a Diagramm one harness is with 2 wires on off and another harness with 6 for the immobiliser,i was thinking to connect the resistor to the black and blue k-line immobiliser

[@KingGem24]

Thanxx.should the ignition still be connected to the wiring harness or not

[@DRKKNTRACING]

silva wong for everything else to work such as taillights then yea.

[@SlowS1kRR]

i have a 03 gsxr 1000 it has the c42 code, my green connector only has 4 pins. a red wire, a brown wire, a orange/yellow wire and a orange wire. will this still work for me?

[@DRKKNTRACING]

Yea but you dont have a brown wire?

[@SlowS1kRR]

yeah i have a brown wire it goes to the tail light

[@SlowS1kRR]

how many wires does your ignition have at the green connector?

[@DRKKNTRACING]

Thats all of them that you named off

[@SlowS1kRR]

alright i will try it out tomorrow after work, i just bought the bike 2 weeks ago with a no start condition. only code i have is c42. the o/y wire at the ecm pin 64 has 12.7v which i have read that it needs to be about 6-8v to bypass the anti theft. what kind of relay did you use just any 4 pin relay?

[@CNC-Guru]

Hey man what year is this? I have bought 2010 engine with wiring and it does not have a key, now I’m wondering if this would help me starting it?

[@DRKKNTRACING]

For 2010 they have a chip inside of the key then you have to get the key married to the ecu.

[@CNC-Guru]

DRK KNT RACING which means I would have to contact Suzuki Dealership and idk who was past owner as I got it off Auction. Does that mean I’m stuck with engine and wiring without being able to Hotwire :/ it’s so hard to find any information for this year of the GSX-R

[@DRKKNTRACING]

There has to be away but like you said its hard to find info. Grudge bikes get rid of the ignition but good luck getting any of them to talk which is why when I figured something out I made a video on it. It may be easier to find a ecu, and a ignition with a key, or just a ignition with a key and find someone to program it.

[@NJrezident]

Does your gsxr have an immobilizer? Cuz I thought only UK gsxrs had immobilizers

[@DRKKNTRACING]

It did hace one

[@dbdb4274]

Any info on a bmw 800gs bike was stolen and recovered can't start it

[@DRKKNTRACING]

Unfortunately I no nothing about BMW's or were to even start with it.

[@tiffanygomez2809]

Can u call me I really need help. I recovered my bike from an attempted jacking and the wires are all open. I got it to turn on but won't start

[@DRKKNTRACING]

TIFFANY GOMEZ just message me on the DRKKNT Facebook page

[@NotAustinChase]

100omh 1/4 is the resistor

[@hackers_hood]

Does this work on the 07 gsxr? I have my key but my immobilizer light keeps blinking seems like my immobilizer system has an issue..

[@DRKKNTRACING]

Honestly I'm not sure if the 07 08 is the same.

[@James-wo1np]

Did you try it?

[@neno13264]

@@DRKKNTRACING hi I got the same thing on my gsxr k1 1000 bike won't start after sitting overnight.. So I'd like to see what wires need to cut and put a resistor on them.

[@DRKKNTRACING]

@@neno13264 100 ohm at a .5 watt resister

[@johnstewart9063]

hey bro i already wired my bike because i lost the key and couldnt afford the locksmith. so i did a bypass to the killswitch. so when i flick my killswitch it starts the bike.. i Wanted to ask you how i can install the toggle switch and which wires to connect the switch to. mind me im pretty stupid with this kinda stuff its a miracle ive got this far... thank you for any help.

[@DRKKNTRACING]

John Stewart yea you can. The only bad part about doing that is that its easier to steal your bike

[@johnstewart9063]

Yeah i understand that. but you think we can install one of these as the toggle switch? check this out kzbin.info/www/bejne/bJS9fpmHoZh1rbM

[@DRKKNTRACING]

Dude that would be sick if you did that. I'm sure you could

[@businessman953]

This can cause the c41 codec

[@sevaslee4865]

Im a dumbie , can you send me a diagram. Im tryna figure out your wiring but the angel sucks lol

[@KingGem24]

Hi.i lost my keys in a crash.now i cant start it because it was chipped or had anti-theft.which part of the bike is restricted by the anti theft.because now my fuel pump and injectors get no power.are those the restrictions

[@DRKKNTRACING]

silva wong 100watts 1/2 ohm 5% carbon

[@jameskray4368]

silva wong did you manage to get your bike running ?

[@mr_memes781]

Are this work for suzuki gsr 750- 2013????

[@DRKKNTRACING]

The chip is made into the key so im not sure.

[@BobbyGlaze]

Bro I can't figure it out my bike has been outta commission I've ordered ignitions I can figure it out

[@DRKKNTRACING]

What Bike?

[@lucidgravitationalpull2234]

What if you buy a whole new ignition for it ?

[@DRKKNTRACING]

Depends. If you get an actual own ignition then it'll work but if you get an eBay one then it's a crapshoot.

[@primedrakko7603]

I need help!! My bike k6 would start and run for a minute till f1 light came on. Code c42. I did the resistor and now when I turn the key nothing. Not even the accessories. No power at all! Please help

[@primedrakko7603]

Update! Rewired the orange and yellow and solid orange. Now I turn the key and turns on fine. Took the ignition out and the resistor is ran to the black and white wire and a soldering point where you can’t tell the wire color. Any ideas from here? I have a good idea but open to other options. Thanks

[@primedrakko7603]

Damn dark knight, I’m stuck. Help me please!!

[@sammyjohanson3653]

Can the 100ohm resistor be any wattage ?

[@DRKKNTRACING]

.5 watt

[@dwaynecooke8062]

Can someone please tell me the watts of the resistor please I need my race bike started please

[@DRKKNTRACING]

100 ohm .5 watt 5% carbon

[@danmcnulty3607]

Do you still have a web page or a Facebook or something that I can contact you with I have a i have a 600 GSXR I bought was wrecked I have no upper wiring harness I'm not planning to make it a bike again planning to make it a four-wheeler would like to know a little bit about the wiring on the top end

[@DRKKNTRACING]

No unfortunately I have gotten rid of all pages.

[@MoodSwingZX]

Bet its 100 ohm 0,5W...

[@michealthompson1250]

Someone cut my wires trying to steal my bike! This sounds like a good idea to go back with a hidden switch! Thanks! I'll find a resistor!

[@jamesvincent1482]

Security systems for a ninja callus saki to 50 0 8

[@twistedsocal]

100 ohm resistor on Kawasaki and I think Suzuki as well. don't even need the shit for the newer r1's. I know cause I do keyswitch deletes for friends who race

[@roderickmatthews7029]

@@twistedsocal where did you place the resistor and which two wires are connected for the 07 zx10r

[@twistedsocal]

@@roderickmatthews7029 on an 07 I'm not sure, it's either a brown or grey wire that you have to jump with a 100ohm resistor to the wire the becomes hot after the switch would normally be turned on, then u can just replace the key with a toggle such as the run and kill switch

[@roderickmatthews7029]

@@twistedsocal on the 07 ZX10R I jumped the grey wire to the white with a resistor... 100 was getting to hot.

[@calebymaya420]

Thank you bro 😊

[@BobbyGlaze]

I need a resister

[@tylarjohnson5245]

I just came from jail I did 6 month bid I lost my key how do u unlock wheel is it a way ? I have a gsxr 1000

[@DRKKNTRACING]

Tylar Johnson cut the lock

[@tylarjohnson5245]

DRK KNT RACING not a regular lock bro my motorcycle locked from the ignition

[@tylarjohnson5245]

DRK KNT RACING do u have fb I can add u can show you if u got time

[@DRKKNTRACING]

Tylar Johnson drk kit racing fb page. You can message me there. I know what type of lock it is. You turn the ignition key all the way to to left and it looks the wheel. There is a pin on the fork that pushes out. That's what needs cut

[@DRKKNTRACING]

Well I guess its on the ignition switch

[@sammyjohanson3653]

I can find 1/4 watt 100ohm 5% will this work or does it have to be .5 watt also

[@DRKKNTRACING]

I would try it

[@James-wo1np]

Did this work?

[@Alidean13]

Anyone know how on a 2005 yzfr6 which wore to splice into ?

[@twistedsocal]

r6 is just like the r1 look up the woodcraft keyswitch eliminator for your bike find a good pic and zoom in pay attention to the with color and you should be able to figure it out

[@KingGem24]

Will the bike work normal if i change my chipped ecu and ignition switch with a non chipped one.please help.thanxx

[@daytonschaffer3199]

Hey could I buy some off those resisters from you???

[@Nismo65]

go to a electronics shop a buy a 100 ohm / .5 watt resistor for a few cents or a packet for a few dollars this guys instructions are total shit a relay is not even necessary to get spark from the cdi to the coils, the resistor cuts 12v to about 10 volts on the grey wire inside the original key contacts that goes to the cdi box you can add it at the cdi box wiring spliced between the orange and grey wire if you want and run no key ignition but will need a toggle switch to turn on battery red wire to the orange wire to make ignition power up so you can crank it over. this is for track bike running no lights etc

[@alchatrali8842]

Please give us the resistor number

[@DRKKNTRACING]

100 ohm 1/2 watt 5% carbon

[@gregmcglory]

I can't find your page

[@crunchihuahua]

100 ohm

[@DRKKNTRACING]

crunchihuahua yea

[@Xxmeca421xX]

Thanks for showing me what I need to look up to steal a bike.

[@helgealeksandermoisandvold4678]

is do You still have the resistor in the ignition lock While doing this?

[@DRKKNTRACING]

Helge Aleksander Moi Sandvold yes

[@ib9459]

Will this work on gsxr 750 eu ?

[@DRKKNTRACING]

Maybe

[@TheMojica17]

hey dark Nigth would this work on a 06 gsxr 600

[@DRKKNTRACING]

I don't think so. I believe the 06 600 has the chip in the key

[@TheMojica17]

@@DRKKNTRACING Thanks for replaying i really apreciate. I guess am tested, i have bought two ignition switches no luck. Do you know anyway around this

[@DRKKNTRACING]

The key has to be programmed to the ecu. I would see who can do that in your area.

[@TheMojica17]

@@DRKKNTRACING thank you so much man, you being so much help.

[@TheMojica17]

@@DRKKNTRACING do you know how to identify is my ecu is equipped with the chip for the key

[@Justin-oe9fs]

Okay so I am in the same boat as many of them out here I lost my key to my 00 gsxr 600 and I can't get it started now? If someone could be of any help like send me a message on Facebook or something my name is Justin Miller

[@marydoyle4133]

Hey, any update on this? I have same problem

[@Justin-oe9fs]

@@marydoyle4133 sorry no I went ahead and sold that bike

[@Hazax11]

bro. send me a resistor..

[@TitaniumRaceTeam]

That’s awesome

[@miketodd1260]

Please contact me about 06 1000. Im about to roll it off a cliff

[@conservative-proud]

Very difficult to follow brother !!

[@deathbybacon0245]

Bro ........what

[@shaabbaaranks6287]

Did it your way and I get f1 code c42 still

[@DRKKNTRACING]

Shaabbaa Ranks did you get it to work yet?

[@shaabbaaranks6287]

DRK KNT RACING I talked to you on fb gotta get a fuel pump

[@jameskray4368]

Shaabbaa Ranks i have the same problem I get code c42 and you help me , my ignition wires have been cut all of them any help ?

[@joeljimenez3017]

Hello I recently recovered my bike that was stolen

[@joeljimenez3017]

I've purchased ebay and Amazon switches and nothing and the only code I get is c42 so I'm guessing this has to be my issue could you call me or email me to show my slow ass how to do this I'll pay pal you some cash

[@DRKKNTRACING]

Just follow the steps in the video and us a 100 ohm/ @ a .5 watt/5% carbon resister

[@joeljimenez3017]

@@DRKKNTRACING is this what I need ? E-Projects 100EP512100R 100 Ohm Resistors, 1/2 W, 5% (Pack of 100)

[@DRKKNTRACING]

Yea. You just need one but its hard to buy just one

[@joeljimenez3017]

@@DRKKNTRACING is it true I could use a 10 fuse instead of the 100 ohm rrisister ?

[@bmwrider1931]

100 Omn easy as shit lol