GT350 Track Pack Spoiler!!!

[@ThatGuy-wz3or]

Got advice from an auto body expert because I didn't want to drill holes into my trunk lid to install the spoiler. First thing you need to do is to use sandpaper and rough up the bottom of the spoiler, Then you need to use a degreaser like R-M 900 to clean off the spoiler. Once that is done you need to use an adhesion promoter like 3M 4298 on the spoiler before sticking on the double sided tape. Make sure you try to cover as much of the spoiler with double stick tape as you can. DO NOT use the tape provided with the spoiler. Make sure you use 3M Super Strength Molding Tape it will say ideal for attaching vehicle body side moldings, trim and emblems. You also need to do these steps on the trunk lid. Use sandpaper or a brillo pad to rough up the paint on the trunk lid. You don't want to take off too much paint. Just scratch it up slightly. Clean with a degreaser, then use an adhesion promoter. Peel off all the double stick tape covering and place it on the trunk lid correctly the first time. Its best to use a second person to install because you only get one chance. Once the spoiler is on the trunk lid press down firmly and use a microfiber cloth to push down and move along the top of the spoiler to fully seat to the lid. Use a heat gun or blow dryer to heat up the tape along the edges of the spoiler. Wait 72 hours for the tape to fully cure before you drive in the rain or carwash. Your spoiler should stay on permanently now!!

[@Chava0454]

That Guy can I just use the screws to attach the spoiler???no tape

[@ThatGuy-wz3or]

IndominusRex 10 use the tape with the screws to cushion the spoiler on to the trunk.

[@Chava0454]

That Guy I noticed that I had some leftover holes in my trunk when I changed my spoiler to this one do u think water can get in there when I wash it?

[@ThatGuy-wz3or]

IndominusRex 10 that’s exactly why I didn’t want to drill holes and introduce rust,

[@traelewis1596]

Just get an oem one. The tape is already installed on the spoiler and none of the crap where bolts aren’t installed

[@Sadorus]

i have watched at least 10 videos about the installation of the spoiler, you're the only one who made it easy and simple, all the other videos made me terrified of the procedure and seek the help of a professional.

[@MannyGStatus]

I'm glad I was able to help brother. Thank you!

[@marcpersad5441]

This spoiler mounts in the same spot as the stock spoiler?

[@92vanguard]

You can also use kerosene, denatured alcohol or (in a pinch) acetone "nail polish remover" to strip the adhesive left after using the heat gun.

[@DTOM7467]

Dental floss is great for cutting through the adhesive. For future reference.

[@darkstallion_5.088]

Great details on the video 👍 thanks.

[@MannyGStatus]

Thank you! Glad it helped!

[@TrueChristina]

Super thoroughly, thank you so much! Can’t wait to install mine now.

[@5.0drew]

Did the tape just cover up the holes? So that water doesn’t enter ? Or how were they sealed?

[@Christimovic]

looks like he just let the spoiler cover the extra oem holes lol

[@Chava0454]

Chris does water go in those holes?i installed mine yesterday and I didn’t cover the extra holes

[@abelestrada7819]

I thought I was the only one who used a fork when I did my spoiler install. 😂

[@magnusrayan498]

Pro tip: you can watch series on kaldroStream. Me and my gf have been using it for watching lots of of movies recently.

[@leonardthiago8816]

@Magnus Rayan Yup, have been watching on kaldroStream for months myself :D

[@JavierGarcia-xz5yr]

Ayyyy. PEEP that genesis at 14:35👌🏻

[@MannyGStatus]

😂😂😂

[@JavierGarcia-xz5yr]

MannyGStatus we need some revs on this channel

[@MannyGStatus]

@@JavierGarcia-xz5yr exhaust video is definitely coming very soon! Make sure to have that bell turned on so that you know when I upload a new vid 😉

[@blackgt19]

So my bolts fell into the trunk. What can I do to get them out?

[@McGinnis]

i had the same thing happen, i took off the 4 screws that attach the trunk to the car and unplugged everything and just dumped them out. took me like 3 minutes

[@blackgt19]

@@McGinnis oh really. I'm gonna try that. Thanks!

[@schellingrs]

Looks good man.

[@theonearmwolf4956]

what bolt did you buy to put on those last 2 holes? Isn't it the 10mm bolt with rings? Mine didn't come with bolt...lol

[@MannyGStatus]

You talking about the ones I mention at 0:57 ?

[@Tstre3tz]

@@MannyGStatus what length are the bolts?

[@JoseManuel-nb9jc]

What length are the bolt?

[@JayJay0470]

can't find any of these right now for that price.

[@user-vt8dd6fj7v]

Which exact one did you buy? You linked 4 different ones

[@MannyGStatus]

The exact one I bought is the first link, but its currently out of stock. But the other links are the same spoiler just different seller!

[@ldylkr]

That looks good.

[@chrispocasangre7128]

You should do a POV of you driving 🤟🏽

[@MannyGStatus]

Good idea, I will definitely try to get something together! Thank you for the suggestion!

[@chrispocasangre7128]

🤟🏽🤟🏽🤟🏽

[@hjjr-se5jv]

Kinda looks like Ford didn't plan on anyone taking the original spoiler off..😁.

[@Unsub424]

Now the only thing thats missing is the V8 😉

[@derekthegreat1114]

Good video.

[@Anon1mous]

Bad design by not using the middle holes too. Wasted opportunity to hold it down better. No wonder it wouldn't stay on right.

[@nancycolin7690]

American muscle is only selling it for 149.99 but it’s out of stock 😭

[@MannyGStatus]

Yea when I made this video AM was never selling that particular one. Looks like it's out of stock a lot of places unfortunately!

[@Preacher0117]

@@MannyGStatus it is still out of stock, I have been waiting for it to come back and I don't think it will be any time soon sadly! Thats why I'm watching your video!

[@propetabengkong9894]

Hi I have a question the spoiler is compatible For mustang premium 2017 model

[@brianbiegert3301]

Damn you got lucky. I bought this spoiler and the holes are off 2-3 inches from the factory ones.

[@MannyGStatus]

Damn, really!? Even the 2 outside ones?

[@brianbiegert3301]

Yep. All 4. 2 outside we’re about 1 inch off. Inside we’re 2 inches. Had to drill all new ones. Looks good now, but it was kind of a pain. Lol

[@MannyGStatus]

@@brianbiegert3301 dang dude that blows! Well glad you were able to make it work!

[@ohwows5265]

Cheap price

[@propetabengkong9894]

Hi Manny the gt350 spoiler is compatible For mustang premium 2017 model