Project SUBZERO Gets a New Wing! Did We Overdo It?

[@ThatDudeinBlue]

Don’t worry. Coil overs are on order. They take awhile to be made. Needs drop ASAP.

[@rickdavid6265]

Was about to comment about that gap😂

[@yeeyee5.382]

NeEdS MoAR LOw

[@shawnbaugher6472]

Don’t forget adjustable arms

[@thatweebaaron]

Dude you don't even have a plate yet

[@blvk_sky]

Definitely add a splitter, they really make the front end of the s550's A1

[@henrybex2159]

I think it looks good but the rest of the car isn't as aggressive. Once you update the rest of the exterior it'll fit really nicely.

[@FastGunner2040]

A PP2 Extended Chin Spoiler...

[@TheModAddict]

Applying 3m tape: I Love this stuff Removing 3m tape: I HATE THIS STUFF

[@Briggsian]

It's coming together. Needs an aftermarket grille though

[@PatrickItsPains]

One minute after uploading and this is already on my recommend.. HELL YES! Subzero is looking mean so far!

[@PapiTheGoon]

For future reference use a 3m eraser wheel it will get all adhesive no matter how old or crusty right off!! :)

[@BBHDragZz]

Was wondering why he didn't use one of those xD Makes it SO much easier!

[@sifter226]

Carlos Felix you saved me a google search lol. I have to remove a fair bit of 3m tape off my car and I was wondering how to do it.

[@skaterockerstar]

Gotta be careful with the eraser wheel because it will remove paint.

[@laneshedd6751]

Whatever you do. Do NOT use the eraser wheel on a painted plastic piece such as a bumper. It will take paint off. Only use it on metal

[@gsjourney3054]

Lane Shedd bare metal? Is it like a pad that scrubs it off or something I’m sure a simple clay bar would take some adhesive off since it tastes off tree tar

[@boostedbird4799]

Loving how quickly you're moving on the S550! Looks great! If you're ever in and around Ohio, I'd love to have you review my 01 supercharged 3.8 firebird! It's quick af for how cheaply I did it lol

[@HallsoftheSummer]

Send him a business email so he can see

[@boostedbird4799]

@@HallsoftheSummer I did back in August. Still waiting on a reply

[@SaberSlayer88]

if im ever up in that neck of the woods ill have to run you in my procharged 02 3.8 mustang id love to see how they perform together

[@boostedbird4799]

@@SaberSlayer88 definitely! Mines still on a stock SC pulley, but I do have headers and a tune for 93. Feels like it's right at about 250 whp. 1st gear is completely useless for me from the wheelspin lmao. Working on dropping to a 3.6" SC pulley, and adding a true dual x-pipe. Should put me at about neck and neck with an LS1. Right now I've taken a 4.6 2v with my current set up

[@SaberSlayer88]

Zach Cook is it the m90 blower?

[@amberionik]

If the wheels were gunmetal it would look so much better imo

[@Cal-El]

I think once the blue comes in, it’s gonna look phenomenal

[@Nenzer]

Black m8

[@supremekushhh1683]

[AMBERIONIK] or chrome.

[@ogspmex9926]

Waves M8 basic

[@MFullaStyle]

Gunmetal on white is a no no . Gunmetal goes with darker shades of colors

[@dannyeagles29]

Such a good and consistent KZbinr your videos never get boring like all the others

[@ThatDudeinBlue]

Danny Yousif thank you so much!

[@dannyeagles29]

@@ThatDudeinBlue np buddy dont change a thing.. keep it up! god bless

[@JoeyMagana]

its coming along so well and quickly, Im glad you went with a Mustang as the new project

[@pablocarti]

Rear end is looking mean, the front end is screaming for a splitter. Love the s550 content

[@nunyabinis]

Ford Escort cosworth RS OEM spoiler. So 80's gaudy, it's become beautiful!

[@JuanMartinez-zw4tn]

nunya binis isn’t the escort wing super big & with a “leg” in the middle?

[@maverick_578]

@@JuanMartinez-zw4tn yep haha

[@Stick.Shift.Captures]

most of those adhesive removers are just a high concentrated IPA(isolpropal alcohol) that you can buy at the grocery store for less than a dollar. Try that instead of picking at it. You could also get a plastic razor blade thing that wont scratch your pain much. (yes it will still scratch it, but it shouldn't be bad enough that you cant compound and polish it off.)

[@leslie7872]

Get some black side skirts and front lip to match the spoiler.

[@angelsuarez17]

Definitely like a Mach 1

[@Zapzdoughnut]

Love it! Seeing you so happy and excited about a new build makes my day!

[@johnnynikkisophie]

I’m glad you didn’t do the facepalm thumbnail “I already ruined my newest mustang!” a la streetspeed717, guitarmageddon, every other car youtuber

[@ThatDudeinBlue]

What’s your favorite OEM spoiler on a car?

[@raymondguzman5083]

Carbon fiber 2018 mustang gt350

[@hyperbluewrx]

Ford Sierra RS Cosworth

[@shubhranshjamwal]

ThatDudeinBlue The TOYOTA SUPRA MK4 (I am not sure if that huge wang is stock on it though)

[@eduanmeyer2490]

Blob/Hawk WRX STi with stabilizers

[@fridtjofriibe5961]

2005 Toyota Hiace Don’t ask

[@thatloudCG5]

BlackPanthaa impression: (GASPS) IT'S GOT A BIGGER WANG!!! 😍😍😍😂

[@1BrianSawyer]

6:33 Dude (in blue), you should try the paper towel trick. worked on hex bolts and allens as well. Tear a small piece of a paper towel, and place it in the female side of the socket-or-screwdriver/bolt and insert the male end of the same into the other side. For example, with an allen, put the paper towel on the bolt, then insert an allen wrench. Now you have one solid piece that won't fall while fastening it together with a nut or material being screwed into. When tight, pull the tool as you normally would and the small piece of paper towel falls out like it was never there.

[@gigatron2008]

So glad you chose the S550 over the Supra. Biased viewer bc I own one. Loving these mod videos! Keep em coming :)

[@wackomanx]

An easy way of keeping a nut or bolt secured in the socket is to take some tissue or paper towel and lay it over the head of the nut or bolt. You can then sandwich the tissue or paper towel in between the socket and the nut or bolt. Tare the excess paper away from the head of the socket. Remove the nut or bolt for a socket with tissue or paper towel lining the internal wall. It's a nice way of installing or removing nuts or bolts that are prone to falling out of the socket. It's a life saver if there are no magnetic tools at that moment.

[@jacobsiekmann426]

RTR parts coming? I love the grill lights.

[@victorfigueroa9905]

I was really looking forward to this build but, then I realized I would have preferred a GT350/GT350R for an all around build, it looks aggressive AF and that 5.2 flat plain sound never gets old. Gt350 should have been an option on the poll

[@derektion2]

Hey David, another thing that works in making sure you don't drop a nut like that is put a bit of dum dum on a socket or something sticky like that so the nut sticks to the socket

[@perfectoorozco4045]

You have really good taste when it comes to modding cars. Subzero looks incredible already! I can’t wait to see what’s next

[@OctaneStreet]

Wing looks amazing, glad you got it pre painted black. And shout outs to AMERICAN MUSCLE, the guys and girls over there are awesome!

[@nictemple6407]

David I’m super excited that you got a new mustang! I’ve been here since day one Smurf. Sub Zero is already looking incredible

[@Terminatorcobra04]

The exterior mods are really coming together nicely David. I can't wait to see what else you have in store for this build!

[@nicklaplante907]

I really love all this quick content about subzero! Keep it up!

[@automotiveantics]

I love the spoiler!! Great choice! Big fan of the white car and black accents 😍

[@lmfscrew]

Just half way close the trunk to remove the bolts, won’t drop them that way.

[@charliestavro2843]

Looks great! I have the same one on my 16. Definitely one of the top 5 best looking spoilers for S550.

[@Static_Drip]

Coil overs, tints, full exhaust and it’ll be perfect 👌🏼

[@brandonburchell8]

That wing is perfect 👌🏼 continue with an all white/black theme

[@TheDutchTexan]

She's looking THICC! Slowly but surely the changes are coming together. The inevitable drop and front splitter will probably button it up nicely. Heck, carbon fiber hood maybe? Wrap the center portion of the roof black? The storm trooper is there in full effect! Perhaps paint the calipers grabber blue, it would fit the color scheme and be a throwback to smurf without destroying the stormtrooper look it has.

[@DJDprod.5828]

its honestly really interesting seeing what you do to this thing over time

[@lucasblanchard47]

I really dig that style of spoiler! Just a simple “blade” design. Pretty neat that it has the lower section in the center to help with visibility when looking into the center rear view mirror! Do they also make the extra little clear piece that you can bolt on to the center of the spoiler for even MORE downforce, like on the newer Corvette Z06?!

[@phreum]

tint, vinyl wrap roof, spacers, ebachi lowering springs, wrap the heat extractors and mirror caps. Panda mustang built mine the same way with the NMD black spoiler.

[@Kyle6OH]

Absolutely loving this build! So much different than the 5.0’s where I live

[@crackalope]

You must live in a different planet then, every mustang build is almost the same

[@iroquoispliskin6077]

I’d paint the wing on SubZero a nice blue for contrast. Looks great regardless. You should get some track times on a course and 1/4 mile and update them every once in awhile after mods to check the difference.

[@Kdrobuilt]

Good choice on the black spoiler, made the taillights pop a lot now.

[@karag6556]

Best choice!! Not at all biased, I got this one myself and had to drill the holes myself into the trunk on my car with 5000 miles on it lol.

[@travisdunn5675]

Subzero is looking Badass. Time for some tint. I do think it would look better if you went with black chrome or gunmetal wheels, but is only my opinion. Can't wait to see what the future holds for this car.

[@ThatsNotVeryFunnyLol]

Mustangs always have cool wing options. I wish I could name them but Im not well versed in Mustangs... just know, yall have some of the coolest wing options out there

[@paulgarcia461]

00 cobra r wing looks like a park bench

[@joealex65]

It's looking better and better! I love it, i hope you get some RTR parts for it

[@eduanmeyer2490]

Spoiler looks great! Now just match it with a similar style and subtle front splitter. These combined with the coming coilovers would look neat!

[@mclarenjohnf1]

David that looks wicked I like it not overboard. Again no notification bell clicked.

[@RealSteezyJay]

I was gonna come on here and say “bet he’s lowering it next” and then I seen the coil overs were on order lol

[@martinritch5241]

GREAT VIDEO. SPOILER LOOKS GREAT.

[@davidnilles3117]

The spoiler and the Euro tail lights look great! Good job!

[@daltoncahn55]

Next time for a little advice for removing adhesive is invest in a eraser wheel. They are super easy to use and inexpensive. Just throw it on a power drill and use at low rpms. You can pick one up online or the local auto parts store.

[@johnzeitouni243]

I LOVE THIS I GET EXCITED EVERY TIME I SEE A SUBZERO VIDEO

[@cjsaunders06]

Man I am totally digging this white on black situation. Looks so aggressive.

[@anthonywhavers8232]

Heat gun to assist removal of spoiler and eraser wheel if needed for remain 3M adhesive would make it easier next time. Love the vids. Keep it up David.

[@cbchevy74]

Dark window tint, rockers and a front lip in black, then the coil overs you have ordered and this will look sweet. You should get the arrow front turn signals too.

[@dominikzarnowski8812]

It's nice to see you choose the same spoiler I'm rocking!

[@DucatiDiaries]

👍👍👍 Spoiler looks great. Nice work on the car cleaner stuff. More cleaner for cheaper? Great business model. I'm heading over to buy some now.

[@JANEMBA9000]

I'm not the biggest fan of American Muscle Cars David but that does look great . Good Job 😊 Your Awesome

[@mariomariojr32]

You could have keep the trunk at the half way open point and removed the bolts without it dropping inside the trunk structure. You have the trunk opened all the way up making gravity push down on the bolt. If you have the trunk half way open, gravity pushes the bolt sideways preventing it from falling inside. But the magnet method was very clever.

[@RSNitsua]

I really like the wing. It kinda reminds me of the older Roush style wings they use to put on the the Stage 1-3 cars.

[@jok3r2015]

I subscribed after watching some of your integra vids. Love your channel and the passion that goes into each one of tour videos.

[@jaredteasdale7414]

Now all it needs Corsa, BMR suspension and lowering springs, and a turbo 👌

[@TwistedThrottleyt]

You need some magnetic screwdrivers my man

[@kiefergebhardt1327]

Temp tags still on the car 🤣 awesome seeing how quickly the build is coming along

[@AutoYoung]

To prevent the bolt from falling just close the trunk lid a little to make it perpendicular and it'll stay in the socket. I literally do this daily at my job...

[@aizazrehman5153]

Man only if the wheels were black this would look amazing

[@Agnostic.JohnOG]

Aizaz Rehman this exactly what I came to say. I think for those color wheels he should have gone with a white spoiler.

[@ogspmex9926]

Basic

[@trystanswansonart]

pretty boring tbh

[@superrad1659]

EXCELLENT choice of spoiler David!! I really like this look, round it out with some tasteful carbon splitters or something...oh yeah. i can dig that. 👌

[@iandavis8755]

Looks great David, I have always liked the ducktail type spoiler on Mustangs. When I had my 05, I was going to do one...like the Shelby reproduction one. Keep up the good work!

[@TheRealEvilSink]

Next time, cram some paper or shop towel into the socket when you are gonna screw it back in. Keeps the bolt from falling out of the socket, making things like this super easy. First trick i learned from my mentor.

[@TheRealEvilSink]

The black and white theme looks really good, you deffo did the right call on the wing :)

[@ray_s5505]

Car is starting to look like mine hahah but congrats bro really nice car and the mods ur doing are killer keep up the good work bro 💯

[@mndyshadow]

Man I would love to see that mustang in person. Too bad I'm a few states too far. Either way, SubZero is coming together nicely!

[@jashy66]

Coming together clean man

[@Cornkake]

I also have the black MMD V-Series spoiler on my Oxford White '15 GT. Love it!

[@richmcdowell]

This spoiler should've come factory. Project StormPegasus is looking RIGHT!!!

[@Ish_the_drift_boi]

I'm a simple man I see Thatdudeinblue upload a video I click on it and hit the like button.

[@Maroco918]

Got my approval 🙏👍💪

[@davvidhzara]

Man that thing is coming together In some kinda sexy way! Keep it going

[@dannyboi1672]

Completely transformed the entire car with 3 mods 🤤

[@terrabnadia1793]

I just put a Carbon Fiber spoiler on my Camaro SS and it’s the exact same process lol. Personally I think a carbon fiber spoiler on your S550 would look awesome but the black is definitely my second choice

[@manuel22almaguer]

Looks so clean...maybe black wheels would be perfect

[@music4you83]

Jsus such a monster truck

[@alexmejia1238]

This looks dope! Cant wait for Power mods!

[@PANTYEATR1]

YAY! I'm happy for you...now paint it white💪

[@trancextend]

I love that spoiler. Not too much tail whip. Wish all cars had easy install.

[@jordankowalski2823]

I have the same spoiler on my black S550. I love duckbill spoilers. And I had to drill into the body. It hurt my soul a lil but well worth it in the end

[@robo1000]

I’ve been on the fence about a wing for my S550 but I think that one looks pretty nice.

[@Foxhound302x]

I subscribed today after i seen your new white pony. Cuz now i can relate with you n i enjoyed how much trouble u had with ur installation of the euro lights. U remind me of Kelso from the 70's show.. Rock on brah

[@MaxSpeedMike]

That's a really good, sleek looking spoiler.

[@Gustavo-bq4te]

So beautiful and clean!!

[@fzj8022]

Magnetize your screw driver by dragging a magnet across the shaft, definitely makes it easier to line up screws in tight spots

[@carguynewb7856]

Subzero looking fly right now

[@angelsuarez17]

Tool tip of the day... Put some grease on the socket. It'll stick to it and you'll never lose a nut lol Awesome wing!!!

[@johnnyjayy14]

Or That Eraser Wheel That You Add On Your Drill

[@tallica4life81]

That’s the wing I have. I love the way it looks from all angles.

[@TheNinjaMonkey43]

That degreaser did a really good job on the adhesive. It looks like it took almost no effort at all

[@IamJay02]

The new spoiler looks great

[@Elmer_RedEagle]

Craftsman 10 pc. Magnetic Socket Inserts ( might be other good brands with same concept) are lifesavers in situations like this.

[@keksauce]

That spoiler looks great! Can’t wait to see what you do next

[@bobbystinson730]

Wow looks amazing really digging the white love it

[@TaylorTobitt]

this looks amazing!!