Putting a gt500 blower WITH intercooler on my 6.0 LS !
Пікірлер: 42
@evansisco5 ай бұрын
Dude, this is fucking awesome. This is the exact ideas I was having I don’t know why I went on a bender one night too watching all the KZbin videos of all the superchargers you can put on a damn Ls this is by far the coolest exactly what I had planned😂😂✊✊✊🛠️🛠️🛠️🛠️🛠️🛠️
@SuperFuzzyman1233 жыл бұрын
Super stoked to find this, especially being so new
@DanielsDesign3 жыл бұрын
Hey man thanks for the kind words. I’m working on it now. Hope to have a new video soon. Just fighting a few problems!
@polarischevy053 жыл бұрын
I'm looking forward to more videos on this project, very cool!
@DanielsDesign3 жыл бұрын
Hey man thanks! I’ve had a couple set backs but still plan on moving forward with the project. Should see some progress soon!
@fredhogan55972 жыл бұрын
This is so cool. What a guy can do with a few bucks some tools and an imagination good luck
@DanielsDesign2 жыл бұрын
Thank you sir
@th3bigred212 жыл бұрын
Dam nice finds bro
@DanielsDesign2 жыл бұрын
Thanks man. About to get it started up very soon!
@th3bigred212 жыл бұрын
@@DanielsDesign very nice, I’m doing a 5.3 rebuild right now just a cheap cam nothing special though
@DanielsDesign2 жыл бұрын
@@th3bigred21 sounds like a good time!
@myoneblackfriend31512 жыл бұрын
I just bought an Odin for the same purpose.
@DanielsDesign2 жыл бұрын
Awesome!!
@solo9019 ай бұрын
Man I need one made lbvs what was the total cost?
@briansaathoff40382 жыл бұрын
Oh and I'm using a 700r4 with a 4000 stall
@joeyjojojr.shabadoo9152 жыл бұрын
Your Intercooler was sooo close to being perfect to begin with. Just make that original oil cooler the new AC evaporator, blow through from the Supercharger and VOILA ! Why let Dodge have all the fun with AC charge cooled Supercharging.
@DanielsDesign2 жыл бұрын
I’m decided I’m going to use it. Water will be my cooling source. I will have a 12v pump and send the water through a heat exchanger mounted up front with fans.
@imaboss1998 Жыл бұрын
You still working on it about to start ordering my parts for my silverado
@DanielsDesign Жыл бұрын
I have been driving the heck out of it. It’s awesome
@briansaathoff40382 жыл бұрын
Hey. Thank you for the video. I've looked at idk how many and none show as much as you have. I'm trying to do a 94 z28 lt1 with a supercharger from a 11-12 shelby. So it's the m122. Gonna use my throttle body. Found cables today I believe. Now I kinda see how to do that plate thanks to you. Which intercooler? Plate for in between throttle body and blower? I'll have more questions also if that's ok
@DanielsDesign2 жыл бұрын
Ask away. I’ll help you anyway I can. I’m getting really close to getting my project running!
@briansaathoff40382 жыл бұрын
@@DanielsDesign Thanks so much. I'm kinda old school n all this stuff is new to me. I'm totally lost on all this blower stuff and how to add it on, parts needed, etc. Found the aluminum online. 50 bucks plus 15 for shipping. So I'll order that today. Ordered my tv cable also. Blower is shipped also. I'll find and order the side strip also to make the box. Or, instead of that way to save space so I can use my stock hood, can I put the intercooler like against my radiator and use a smaller intake? Then, the lines for it go into what? Then theres a air to water pump or something? Some blow off valve etc. See brother. I'm lost as hell. Wish I could add photos on here. I'm gonna do a video on all of it from start to finish with part numbers n etc. This way it's out there for the lt1 guys
@DanielsDesign2 жыл бұрын
@@briansaathoff4038 your physical intercooler has to be below the blower otherwise it won’t cool the air. But you are right with putting an “intercooler” with your radiator but most people tend to call this your heat exchanger. The heat exchanger then cools the water that will be pumped through the intercooler that’s mounted below the intake which cools intake air temperature. Basically you have two intercoolers In a way. Hope this helps you wrap your head around it. As for the height you can definitely get a lower profile intake to save room. The Holley Lo-ram would be a great choice.
@briansaathoff40382 жыл бұрын
@@DanielsDesign ok. I'll make the box part for under the blower,get the intercooler, try to find a intake. It has to be completely open on top of the intake yes?
@DanielsDesign2 жыл бұрын
@@briansaathoff4038 yes sir
@ispintires2 жыл бұрын
why did u decide against adding the cooler? would u have to run some sort of water pump inline to move the fluid?
@DanielsDesign2 жыл бұрын
I actually changed my mind once again and I am going to run the cooler. It will have a separate pump and heat exchanger that it runs fluid through. Keep watching the vids I will be posting more very shortly
@ModernBeastx12 жыл бұрын
Wow this is crSo i need some info is there anyway i can contact you?? I'm looking to do this with a holley low ram and fab a plate to bolt to the top of it set the supercharger on.
@DanielsDesign2 жыл бұрын
Drakedaniels79@outlook.com shoot me a message
@Trichogg2 жыл бұрын
Are you building these manifolds yet ?
@DanielsDesign2 жыл бұрын
Not at the moment.
@crenshawadam19 Жыл бұрын
How can you build me one of them intake
@DanielsDesign Жыл бұрын
I’m sorry it was a one off build
@shier_faun59982 жыл бұрын
If you would fabricate one of there I would buy it hands down ..
@DanielsDesign2 жыл бұрын
I have to finish mine first ! 😂
@shier_faun59982 жыл бұрын
@@DanielsDesign lol I call first order .
@Trichogg2 жыл бұрын
@@DanielsDesign are you building these manifolds ?
@DanielsDesign2 жыл бұрын
@@Trichogg I’m sorry I’m not right now.
@alimehrozi28282 жыл бұрын
Can you put the blower off an E55 amg onto a LS ?
@DanielsDesign2 жыл бұрын
Just from a quick google image search. It looks like that one would be tough because of the intake ports.