Gtechniq Crystal Serum Light Overview & How-To Product Video

Professional detailer James Melfi talks about Gtechniq Crystal Serum Light and how to use it.
Product Highlights:
- Paint coating that adds a beautiful gloss and durable protection
- Gtechniq proudly claims the protection will last 3 - 5 years
- Designed after the professional use only, Crystal Serum Pro
Full Product Description -www.detailedimage.com/GTechni...
Brand Page Link - www.detailedimage.com/GTechni...

[@richardseem7948]

another great video James. I only buy my products from ur shop.hands down amazing prices,customer service

[@DetailedImage]

Thanks Richard, really appreciate the support!!!

[@waxmanvids5015]

love this coating!

[@ClassicRed2159]

My first coating was with CSL. So easy to apply and levels nicely.

[@DetailedImage]

Kurt- I'm glad you found it easy, I totally agree- its so nice to work with.

[@daves.3278]

I think I'm gonna start buying products from detailed image. Autogeek sometimes forget to send stuff in the mail!

[@georgepenny3648]

Would I be able to apply CSL outside leave to cure (without cover) then apply EXO the following day properly cleaning the paint with IPA and or panel wipe? Thanks

[@nuckles2727]

I saw that you use the Mille Ruped machine how do you like it if you don’t mind me asking

[@hakanciftci1797]

👍👍

[@howardlee7216]

Great video, I’m about to purchase the Crystal Serum Light. How long after the application of Crystal Serum Light do you apply the C2V3. Thank you.

[@DetailedImage]

Howard- after CSL has been applied to the paint, you can then apply C2V3 as a top coat right way

[@TonmoyGhosh]

Great video. Can you do a follow up on using EXO v4 on top of CSL? For how easy CSL, I find EXO really difficult to use because of how smeary it is and how difficult residue removal is.

[@DetailedImage]

Thanks Tonmoy, EXO can at times depending on temperature be a bit finicky. I would have additional microfiber towels on hand for removal. Also, applying in a smaller section might help troubleshoot a streaking issue. Let me know how it goes.

[@TM-zk3os]

Hello DI! Are the towels to be thrown away after use and if so, is that typical for all these types of coatings from different brands? Thanks!

[@DetailedImage]

I personally throw all coating removal towels away after an installation. The residue left in the microfiber towels will crystalize and if used on paint can scratch the finish. However- I typically like to sink those same towels in APC followed by a normal washer cycle to allow them to be used for general purpose detailing tasks like, jams, wheels and engines.

[@TM-zk3os]

@@DetailedImage thank you for the insight and tips!

[@dronesinconstruction]

Thanks we are coating our drones

[@symphx3540]

RE: Panel wipe: do I use this full strength or some say 50/50?

[@DetailedImage]

For best results we recommend using Panel Wipe at full strength. Check out this video here for info on Panel Wipe (kzbin.info/www/bejne/Y5jLYYVriqeeeMU)

[@dexterfurman9118]

Great video and I am very interested in the product. Is this a 9H rating?

[@nanditasethi7275]

yes crystal serum light is 9h

[@symphx3540]

Hi, if I want to put on c2v3 how long should I wait after csl?

[@DetailedImage]

We generally recommend waiting 6 hours before topping with C2V3 or EXO.

[@sheperd6768]

can you put this stuff on headlights as well?

[@DetailedImage]

CSL will work great on hard coated plastics like headlights, taillights, and trim. However, for the most durable protection on these areas we recommend a trim specific coating like the Gtechniq C4.

[@jjjjjjjjjjjhjjjjjhjj]

On average how many section do you do on a hood or door And what temperature do you recommend to apply ?

[@DetailedImage]

You want to apply as close to room temperature as you can (i.e. 65 degrees F). I tend to split the hood into 4 areas, but that could change based on the curves of the vehicle and what you feel comfortable coating at once.

[@ciprianionutolariu5193]

what's the "coverage" of a 50ml bottle? can you do a full medium size car with 50ml of solution?

[@DetailedImage]

As long as you apply nice and thin, a 50ml bottle is great for 1-2 applications on larger vehicles or one coat on two vehicles.

[@glxbe]

how long would you wait after apply CSL before applying EXO4? i bought your kit with both online and can't find this info

[@DetailedImage]

Adam - Gtechniq generally recommends waiting at least an hour before topping with EXO.

[@glxbe]

@@DetailedImage thanks for the reply!

[@lovinhouse374]

Can this coating be applied to a gel coat? Can it also be applied to plastic trim?

[@DetailedImage]

You can apply this to gel coat. For plastic trim, you want to make sure the trim is coated and not plastic. Areas like headlights, taillights, and window pillars are great options for application. If the areas are textured plastics or rubber, you will want to use a trim specific coating like the Gtechniq C4.

[@lovinhouse374]

Detailed Image thank you!

[@MrCaptainstern]

Is the applicator reusable? Also should we discard the microfiber cloths or can they be washed and used safely?

[@nanditasethi7275]

no applicator can't be used again bcos after the application of ceramic , it gets hard with the time

[@DetailedImage]

Nandita is correct. Sio2 can harden applicators, so it is best to toss them after your coating application.

[@jusrushem69]

I bought the product, followed the instructions to the fullest and it left trails of wipe marks. I used 3 towels to wipe off and left the car in the garage. How do you get the product off.

[@gregsullivan7408]

I suspect you'll have to polish it off. (by that, I mean an abrasive polish), but I'm not certain. By the way, I learnt a great trick for finding high spots (wipe marks) during application - use a panel light that has a perfectly even light across it's surface, and look at the REFLECTION of that light against the paint. You are looking for areas that are slightly dark. If you see any, buff until they disappear. Using an inspection torch like this guy does in this video simply doesn't work AT ALL for me, at least when applying Cquartz Lite. I'm about to try CSL. Re the panel light, it doesn't have to be bright, but it must be very uniform. I'm actually using a tablet computer, set to display a white screen. I tried a video panel light, but it didn't work nearly as well, because the LED array is too coarse - each LED can be individually distinguished, despite the fact the array is covered by a diffuser.

[@gregsullivan7408]

Here you go - this is exactly what I was talking about: kzbin.info/www/bejne/bIPOoHuQZsqGbLs

[@Icesouldy]

Can CSL be used to coat glass and trim??

[@mikemccrary5080]

I’d like to know too?

[@DetailedImage]

CSL can be used on glass, rims, and hard coated trim pieces. I would advise on using a glass specific coating on your windshield to avoid wiper chatter and for more durability. If you are looking to coat rubber or textured trim, use a trim specific coating for better durability as well.

[@umairejaz6665]

Is this better than the Adam's one has anyone tried both?

[@DetailedImage]

It depends on the coating itself. If you are referring to the Adam's UV Ceramic Paint Coating, if has a similar durability to the Gtechniq CSL. From there it all depends on application characteristics and looks. I have not used the Adam's coating, but both Adam's and Gtechniq are high quality brands so try out both and use what you personally like better.

[@Voidmogs]

Idk why I'm here honestly. I'm not even old enough to drive. Quarantine Is very boring.