I were planning to change my 1070 FE's thermal pads. This video will help a lot. Thanks for sharing.
@trolling5832 ай бұрын
great guide, my friend recently sold me his 1070 FE and first thing i saw was a giant dust bunny throught the view glass of the heatsink. i followed your guide and my gpu temps are 7C cooler than it was before. keep up the good videos
@Tekillyah2 жыл бұрын
Thermal pad sizes sh**********t! Thanks bro.
@AnonymousKev6 ай бұрын
thank you so much kind sir
@gochoa769112 жыл бұрын
Wow great video, very detailed! What does other GPU's you have and are you planning to make videos for those GPU's too?
@frogger15552 жыл бұрын
Thanks for posting thermal pads thickness! I want to replace all of these the next time I open my card. Will it be ok to buy a strip 120mmx20mm of each thickness? Is it enough? Or should I buy some more of the specicifc size? Have you had any problems with cooler contacting the gpu die after installing 2mm thick pads? Sadly I can't measure my pads because they're all squished :
@frogger15552 жыл бұрын
The 2mm thick pad you've got seems to be 80x40mm in dmiension.
@Sunset-Wave10 ай бұрын
It’s a completely different feeling doing it in real life! I would recommend it especially since the 1070 is 7 years old
@pcbuilderlover42712 жыл бұрын
Since the price of new GPUs are so high right now, I decided to take care of my 1070 FE and this will help sooo much, Thank you!
@LukeplaysTV10 ай бұрын
wish you showed which bit we need to take which screws out
@erikhoolihan922 жыл бұрын
Great job. Plan on doing this soon.
@hoaithuongtran41552 жыл бұрын
thank bro !
@ВадимЧелноков-ж9т2 жыл бұрын
Super!
@WolfangKrauzer10 ай бұрын
What a good video, worth gold!!!! I just found a used one for sale here in Argentina for 70,000 pesos, which would be 70 dollars, what do you say is a good price?
@eonhammerw89022 жыл бұрын
I appreciate your video, I am planning to replace the pads on my Founders Edition GTX 1080 and am wondering if it uses the same size pads and your 1070 founders..
@kimjong-un58042 жыл бұрын
Is size same dude ?
@RogerGomes6688 Жыл бұрын
Is size same dude ?
@mxmrkl33872 жыл бұрын
Is it possible to get rid of the VGA Cable "-Bridge". Seems like it's soldered to the card, but I'm not sure.
@ciuppy81 Жыл бұрын
Thank you for this video! I replaced the termic pads and the paste with your guide! Very usefull! :)
@r9robins2 жыл бұрын
Hi Logan. Do you know what is this rear heat sink for? The air from the blower is directed only forward so is it just decoration or what?
@jkqm2 жыл бұрын
Nice Video... Where can I buy all itens for my Nvidia?? Some Tip?
@Dark_Sun_Gwyndolin9 ай бұрын
Thank You ❗
@Publicidadessmiley2 жыл бұрын
can i just mail it to you and clean for me lol
@syntehk10 ай бұрын
Thanks
@sunnykgaming25412 жыл бұрын
is this gpu still good for today games like forza horizon 5.?
@thegoldenwolf2742 жыл бұрын
At 1080p with high settings you can get about 80fps if you lower down to medium and high settings 120fps is possible
@silverpc46112 жыл бұрын
asus turbo 1070 ti is similar with a blower. so i am thinking the pads might be close to the same. did you use all 4 sizes .5mm - 2mm?
@logangoskowicz54912 жыл бұрын
I did use all four pad sizes, and it worked well in my case. If you're missing a certain pad size, you might be able to get away with using the next size up in place of it (e.g. a 2.0mm pad instead of a 1.5mm pad). However, a thicker pad might cause the PCB to bend, potentially compromising contact between the GPU and the heatsink. In the case of AIB cards, I recommend getting into contact with the AIB partner (ASUS in your case) and asking them about the required thermal pad sizes. If they don't have an answer for you, take apart your card anyway, but carefully measure the thicknesses of the old pads with a caliper. The measurements should be accurate enough for determining the pad sizes that you need.
@silverpc46112 жыл бұрын
@@logangoskowicz5491 ya asus does not give out information the way i take it. I ordered 3 sizes between 1mm - 2.0mm, was thinking i might still order .5 mm
@SpoiledZoey2 жыл бұрын
i would really appreciate it if videos like this got no background music.
@mexicosweird2 жыл бұрын
Bro just got mute it's simple
@cingco78402 жыл бұрын
My 1070 FE fan stopped working. Anyone know what might be the reason? Is there a way to replace the fan?
@AkOyunda2 жыл бұрын
hahaha ı just change thermal paste to liqud metal gpu 2050 mhz 61 celcius %65 fan speed F.E does't need thermal pad chenge