Guide to fix Continuous Water Inflow/ Solenoid issue for Panasonic Washer (Model: NA-F75S3)

Only try after your warranty have expired, otherwise any tampering might void it. This is a 4 year old washing machine, I repaired it as most of the parts are still in good working condition.
There is no error code appearing but the inflow water continuously flow in the washer even:
1) Press Pause/Stop
2) Press On/Off
3) Turn off electricity power
The only way to stop the water inflow is turn off the supply tap.
I suspect is the solenoid valve issue. As I turn on the water supply and the inflow stopped. This shows that the spring in the solenoid valve is not strong enough to spring back & block the inflow when the solenoid is de-energize.
I bought Imitation Universal Inlet Solenoid Valve from taobao cost about $7.90 and replaced it. If from shopee or lazada might about +$15.
I am not trained in handyman. Just tried to repair based on personal interest.
DO IT YOURSELF to save money and save the earth (otherwise the whole washer will be in the dumpster).
Remember to unplug power source when handling any machines
Disclaimer: I am not trained in any handyman or electrical work, please do it at your own risk.
Hope you guys can subscribe to my channel and give me some love and support
If there is any experience handyman or repairman watching my video,
Do comment on the things where I can improve on to help me hone up my skills
This video are part and pieces from different timeline as I record those old lost video footages.
All the videos are my first time doing the project. I would share what I have experience and video record along the way. It might not be the correct way. Do give advise and I will keep learning and improve.💪💪
Hope my sharing save you some money💰💰💰 and provide you with some free knowledge.
Like & subscribe my channel to support my small KZbin channel. 💕

[@TrafalgarLawHeart]

Thanks.. its works for me. Easy to change the new part. Not so hard to push in.

[@diyyangSG]

Welcome👍 Great job. Thanks for leaving a comment to motivate people to try out too😊

[@eugenenoah6639]

Thanks.i DIYed myself. Successfull without having using tape. The connector is the most challenging part very hard.😊

[@diyyangSG]

Congrats on your success👍. Always happy to hear success story😊

[@shimaema8139]

Thank you.. As women I can DIY my self.. 😂

[@diyyangSG]

Welcome 😊.Nice job👍👍 thanks for leaving a comment to motivate people to try

[@AmriAnim]

Bos spring pasang macam mana

[@mimiemiasarah9439]

how to change to the same file

[@kjhernandez03]

boss sa NA-F80A5 gnyan dn b procedure?

[@AmriAnim]

Bos spring pasang macam mana?

[@zainimohdarif8762]

My washing mc water gave clicking sound with the water drain out?

[@diyyangSG]

Hi, is it draining give clicking sound (from the drain motor)?

[@krishnachaitanya6389]

Water inflow stops when pressing pause or off. But it doesn't off automatic and rinse operation is not working. Only spins wotks what should be do

[@diyyangSG]

Hi, I think I might be the pressure sensor switch if the inlet valve is working

[@krishnachaitanya6389]

@@diyyangSG thanks it's work. I have another problem that washing machine not rotating in soak mode

[@bossryvlogs]

boss pashare naman nung link ng shopee o lazada lung saan mo nabili yang valve po marami salamat

[@rjvilleno1444]

Boss san nio po nbili ung vwater valve

[@diyyangSG]

Sorry. Not able to Google translate to english

[@rjvilleno1444]

Were did u buy

[@diyyangSG]

@@rjvilleno1444 I bought from alibaba last time. You look for something that look almost the same and same voltage. You will be able to use it.

[@djemorekcuf8304]

Haha 😂 bara pang yan sa drain hose - inuto kayo jan?😅😢😅

[@diyyangSG]

Sorry, can type in english? i don't understand, This video is about solenoid valve. No drain hose