Guides de l'utilisateur Txi-D - 5.1 RÉGLAGE DE LA TONALITÉ

5.1 RÉGLAGE DE LA TONALITÉ - Sélectionnez la tonalité désirée en maintenant enfoncé le BP1 après être passé en mode configuration pour faire défiler les 64 tonalités. Pour changer la direction du défilement des tonalités, relâchez la BP1 et appuyez à nouveau dessus. Relâchez le BP1 après avoir trouvé la tonalité désirée. Pour changer à nouveau la tonalité en mode réglage, enfoncez puis relâchez le BP1 aussi souvent que vous le souhaitez. Une fois la tonalité sélectionnée, attendez que le mode configuration se désactive et la tonalité sera mémorisée. Réglage mémorisé
#carpfishing #Delkim #TxiD #RxD #EvD #NiteLite #SlimLite #DLok #SafeD #SmartClip #carpfishinguk #carpfishingvideos #fishing #French
For more information visit:
www.delkim.co.uk
delkim
delkimltd
delkimltd

[@lemon0751]

Can I ask why you radically changed the design ? I recently purchased some of the new alarms after replacing my old TXI + , I find the new design problematic trying to remember what buttons do what and find them not user friendly at all ! Also I had issues with the buttons on the receiver getting pressed and turning it off in my pocket! Also when fishing with the large eye behind the alarm this would touch the buttons on the alarm and cause issues! The Delkim name was one I have grown to trust but in all honesty the new design is absolutely rubbish and these will be getting sold ASAP! A very expensive mistake @ £600 plus,very disappointed.

[@DelkimLtd]

Sorry you are not finding these to your liking. The default settings are set as your old alarms to make things very easy. Just set your response and go. It is never advised to have the but ring against the alarm on any Delkim as it can cause the line to miss the sensor and it is being pulled at an extreme angle. Quick guides are available on the Delkim app to help you but there are only really 2 setting you would change which would be beep speed and the LED brightness but once set you are very unlikely to change them. At the end of the day we have taken away a switch that used to get damaged and was difficult to access and a tone control and added an extra push button. While they are different once you understand the difference they become very straight forward to use. The receiver switch would also be easily knocked in the pocket so we removed this for the buttons.