Рет қаралды 1,207
This is my RC electric conversion of the Guillow's Super Cub 95 laser cut rubber band balsa model kit! This conversion runs off of a 2 cell 7.4v 200mah LiPo battery and is powered by a 2500Kv E-flite brushless motor. The plane uses the same controller unit as the UMX Cessna 182 from E-flite and Horizon Hobby.
The control surfaces were created since the original model was designed to be flown freely with rubber band power. The model is covered in AeroFilm.
4x 2.7gram micro servos control the rudder, elevator, ailerons, and flaps. The 6th channel controls the "SAFE" mode toggle to active the Self Assisted Flight Envelope technology.
This video is viewable up to 1080p at 60fps.