Build Strong Sleeved DIY Axles This Way + New Concentric Slave Cylinder from Tilton Engineering

  Рет қаралды 1,045

DirtGearTv

DirtGearTv

Күн бұрын

Today we are finishing up the toyota C60 transmission by installing our new hydraulic throw out bearing, or concentric salve cylinder from Tilton engineering. Were also going to be working on the new axles also. The way these axles were made was by cutting the toyota celica axles in half and sleeving them with .250 wall DOM. I'm using 30 degree angles on the axle shaft ends to reduce sheer forces on the welds only.
00:00 Intro
00:45 Concentric slave bearing - Tilton Engineering
02:10 Installing hydraulic throw out bearing
05:38 New transmission mounts
07:32 Buggy project updates
07:59 .250 DOM Axle sleeve
09:43 Plug welding new axles
11:52 Why didn't buggy make the d-town trip - clutch binding
15:10 Fixing the clutch issues - problem revealed
17:00 5th and 6th gear tranny blockout
17:23 Testing the clutch fix and buggy back together
Parts I Use In This Build!
▶ AMP EFI MS3Pro-Evo Full Engine Management System
▶ AEM CD-7 Carbon Digital Dash - www.aemelectronics.com/produc...
▶ Pulsar GTX2860r Turbo - www.pulsarturbo.com/product/p...
▶ ARP Main Studs - arp-bolts.com/kits/product.ph...
▶ Cylinder Support System - www.cylindersupportsystem.com/
▶ Thank You Falcon Clutch Specialist for the Custom Mirage Clutch!
▶ Instagram - / dirtgeartv
▶ Dont Click Me!! - kzbin.info?...
▶ DirtGear Merch -
teespring.com/stores/dirtgeartv

Пікірлер: 5
@johnwhitley9209
@johnwhitley9209 11 ай бұрын
Get rid of those hub springs in the clutch. There won't be any question of whether the clutch is engaged or not. You got spare clutches, you can weld one solid and try it, and see how it feels. You'll order one without.
@DirtGearTv
@DirtGearTv 11 ай бұрын
Really? I've leaned on a few of the industry experts and they all said to go sprung 🤷‍♂️
@johnwhitley9209
@johnwhitley9209 11 ай бұрын
​@@DirtGearTvI think you should try welding up a cheap replacement if you have any wonder at all what it's like. You're the expert here, nobody else really knows what you want. And you have that great ability to pursue a logical thought to its logical conclusion. I did it about 30 years ago, when all the replacement parts were crap; I just welded up a clutch disc to see. Loved it, bought a custom built clutch disc for a damn Chevette.
@jimmace6148
@jimmace6148 Жыл бұрын
So why are the axles sleeved?
@DirtGearTv
@DirtGearTv Жыл бұрын
Needed to union the celica cv's to artic cat outer cv
First Run With New Transmission And Rear End.
15:49
DirtGearTv
Рет қаралды 1,1 М.
Concentric Twist - Insanely Overspec Wireharness Build on Classic 964
30:08
Islandworks Sweden
Рет қаралды 41 М.
Children deceived dad #comedy
00:19
yuzvikii_family
Рет қаралды 5 МЛН
Luck Decides My Future Again 🍀🍀🍀 #katebrush #shorts
00:19
Kate Brush
Рет қаралды 8 МЛН
A pack of chips with a surprise 🤣😍❤️ #demariki
00:14
Demariki
Рет қаралды 53 МЛН
터키아이스크림🇹🇷🍦Turkish ice cream #funny #shorts
00:26
Byungari 병아리언니
Рет қаралды 25 МЛН
Seafoam--can't believe what it did to my engine!!
10:12
Project Farm
Рет қаралды 14 МЛН
How a Manual Transmission and Clutch Works
10:23
Animagraffs
Рет қаралды 3,1 МЛН
Spinning Levers - How A Transmission Works (1936)
9:41
US Auto Industry
Рет қаралды 10 МЛН
How to rebuild a clutch slave cylinder
8:41
driving 4 answers
Рет қаралды 190 М.
perbaikan busi loncat dudukan dol #shorts
0:53
Belajar Mekanik Dari Nol
Рет қаралды 8 МЛН
Гидроудар на мерсе - спас деда Танком 300! #tank300
1:00
ТАНК ПРОТИВ ВСЕХ
Рет қаралды 8 МЛН
Водитель был в шоке от увиденного #дуракинадороге #shorts
0:16