You did an amazing job on Eri. She looks really good.
@epistarter1136 Жыл бұрын
Bruh those poses 😭
@pudinossaurodeleite812510 ай бұрын
Not the "oneeeee-chan!" Pose with the shield bruh 😂😂😂😂
@bodabodaguy31938 ай бұрын
“Sparkles in Japan” 🎶
@dudeguyman13005 ай бұрын
This is probably one of my favorite gundam besides the freedom. This kit looks awesome
@Valid.4l11 ай бұрын
You made me realize I have a lot of work to do
@reimuplush9 ай бұрын
the last pose💀 also nice job its very cool
@bangf1sh Жыл бұрын
That looks beautiful
@reygunplamy Жыл бұрын
Thank you bro❤️🔥🙏🏻
@deganteng562510 ай бұрын
Thanks for the insight! I am interested in buying mr weathering color gray. But where did you apply the gray weathering color? Sorry in the video I only saw you applying black panel line (enamel)
@niccologazzillo970015 күн бұрын
Hi good morning I noticed that you didn't paint the piece with the airbrush, using the Tamiya panel liner what do you use to clean the unpainted plastic? I'm new to modeling and I'm afraid of ruining the plastics since they say the Tamiya panel is aggressive on the plastic…..
@something4533Күн бұрын
Trust me but I heavily discourage tamiya panel lining on bare plastic this stuff ate my hg calibarn up it actually crumbled right in my hands. try to top coat it with something like mr hobby to protect it also remember if your using matte spray cover the clear parts
@hallowking2103 ай бұрын
That sassy pose at the end lol 😂
@csat43639 ай бұрын
Hello, just started panel lining and would want to know what is better between felt tip markers and pour types? Currently using marker since I am a bit afraid about the plastic eating problem hahaha
@reygunplamy9 ай бұрын
Hi bro😊it just depends on our use as a builder/modeller.. it doesn't matter if it's a marker or a pour type panel line..both have advantages and disadvantages..first of all markers are good for lines or detailing that have large gaps but it is very difficult for small detailing..for pour type it is very good for small and many detail spaces on the surface..talking about it can damage the plastic, it's actually not that worrying as long as we use it correctly and don't spill a lot on the plastic surface
@csat43639 ай бұрын
@@reygunplamy Noted, will buy a pour type and will test it on a bootleg model for practice just to keep it safe still 😅 Thank you very much, good job on your kit btw!
@Kaio_Keint21 күн бұрын
What do you use to remove panel liner?
@marchdimal2624 Жыл бұрын
Should I let dry the panel liner first before Erasing the excess? Or erase it right away? I'M new at building Gunplas
@reygunplamy Жыл бұрын
Yeah you need to wait until the panel lner dry first around 5-8 minutes depend on what kind of panel liner you use..(tamiya - 5 minutes its enough) (mr hobby - 10 minutes)
@kaneshirley8057Ай бұрын
what did you use to block the clear plastic parts? it looked like some yellow tape?
@reygunplamyАй бұрын
@@kaneshirley8057 it’s a hobby mio masking tape😊
@lazydrain Жыл бұрын
Do you top coat before you panel line? I heard it will make plastics brittle
@reygunplamy Жыл бұрын
Yes🙏🏻
@leondong5037 Жыл бұрын
Not really. I panel line over bare plastic all the time and I've only had one piece break on me in 40+ kits. You only really have to worry about the plastic cracking when the fluid seeps into the gap between 2 pieces. The solvent within the panel liner can't evaporate, seeps into the plastic and weakens it. In my case, I forgot to cement the 2 upper arm pieces for the HG Beguir-Beu and it went into the gap. It all worked out in the end though since the part that broke was fixed and sanded to perfection.
@fffffflacko8020 Жыл бұрын
@@leondong5037yes in fact I panel on the runner so I'm sure there are no gaps between two pieces 😂
@MrGonjack11 ай бұрын
@@reygunplamyWhy don't you show it when u used the top coat???
@reygunplamy11 ай бұрын
@@MrGonjack i do recorded it but I don’t put it in the timeline due to the long duration so I cutted it out🙏🏻
@yermongo11 ай бұрын
Great work
@reygunplamy11 ай бұрын
Thank you bro🙏🏻
@loiedonn41923 ай бұрын
Question; After putting the water slide decal and setter. Can i just use a gundam marker topcoat to just put top coat on the area where the decal is or do I need to topcoat the whole kit?
@reygunplamy3 ай бұрын
@@loiedonn4192 yes you can..but it’s much better if you topcoat the whole kit for balance look..coz top coat will change the model kit tone
@loiedonn41923 ай бұрын
@@reygunplamythank you very much. I love the plastic look of the MG Delta Plus. I'm just scared that if I topcoat the whole kit the colors might get dull.
@reygunplamy3 ай бұрын
@@loiedonn4192 if you using matt(marker)yes it might be unblance..but if you using spray can or airbrush it will be nice..or maybe you can try with brush if you use the tc marker..I’ve tried it before with mr hobby matt top coat marker but with hand brush coz if I apply it directly from the marker nib it look unbalance
@loiedonn41923 ай бұрын
@@reygunplamy nice. Thanks for the tip. Will surely try the brush option. Thank you.
@Argonaut802 ай бұрын
Do you base coat before panel lining?
@Maki-1702 Жыл бұрын
Nice keep it up and btw what tool to use to fill the gap of you're gunpla
@bobbtaco87598 ай бұрын
Wow, amazing! Did you scribe the model before you put the topcoat?
@LorenzoBravo-l9h2 ай бұрын
How do you wash exesses off?
@jhomeltoledo75196 ай бұрын
Is this top coated before panel lined using tamiya ?
@taitenguerrero20309 ай бұрын
Does the liquid you use to remove the excess ink residue in the panel lines leave an odor?
@reygunplamy9 ай бұрын
The liquid doesn’t leave any odor at all😊
@SulettasFightinglion11 ай бұрын
What top coat do you use before panel lining? Planning on getting this kit but scared of Tamiya panel lining making the plastic brittle
@reygunplamy11 ай бұрын
Semi gloss tc
@SulettasFightinglion11 ай бұрын
@@reygunplamy Ty!
@reygunplamy11 ай бұрын
@@SulettasFightinglion 🙌🏻🙌🏻🙌🏻🙌🏻
@hydrahung71568 ай бұрын
Do you topcoat before assembling or after?
@kennercitykid1122 ай бұрын
Yes! Someone who also uses black panel lining on white pieces !
@montgomeryfitzpatrick47310 ай бұрын
Wont that panel liner make the plastic weak and break? Its supposed to applied over clear coat...even if you clear coated yoy scribed it out of lines. Arent you skipping a step and teacjing oeople wrong?
@reygunplamy10 ай бұрын
1.Am I teach/show wrong step in the video? - no..I’m not teaching or showing anything wrong in this video..I’m just showing my own process in panel lining & applying a decal for the model kit and carefully doing the process without any damage 2.Is the panel liner will damage the plastic? - it won’t damage the plastic if you do it carefully(even the model kit still doin just fine until today😊..no crack no damage at all) 3.should we apply clear coat before apply the panel liner? - we can apply it you want to avoid the crack(if you are the type of person who works with smudges or you afraid if the plastic will crack)
@Rain_WavezАй бұрын
Looks so so good
@1Dylan1 Жыл бұрын
What width chisels do you use for going over preexisting panel lines? And what range of chisel sizes do you usually use for 144 and 100 scale?
@reygunplamy Жыл бұрын
I’m using 0.1-0.8mm 😊🙏🏻
@mangastuds9712 Жыл бұрын
Song name please? also AMAZING work
@reygunplamy Жыл бұрын
Yoasobi - The Blessing😊btw thanks bro🙏🏻
@永野-b3y Жыл бұрын
@@reygunplamy祝福な?英語で祝福ってこういうの?
@mangastuds9712 Жыл бұрын
Omedetou
@SergiOrtiz Жыл бұрын
Its the ending song in the anime “Gundam Witch from mercury”
@toaquiroh3767 Жыл бұрын
@@SergiOrtizand the intro
@alfrededison87795 ай бұрын
What liquid do u use to clean up the panel line stains?
@reygunplamy5 ай бұрын
Im using Mr Hobby Mr Weathering Solvent😊
@alfrededison87795 ай бұрын
👍
@RavienCoromana9 ай бұрын
What were you putting on it to clean up after the panel lining?
@playalot86Күн бұрын
I have that same kit!
@Scep575 ай бұрын
I wish I could like this kit more but the wonky proportions kinda make it hard to get him into good poses. And because of the weird way the feet are built with the ankle being on a free hinge with the toe and heel being on swivels, proper balance is kind of a chore unless you have a compatible stand.
@lennardrannel Жыл бұрын
Hello, may i ask what you used for panel line? Is that a scriber? What's the specifications? Thanks!
@reygunplamy Жыл бұрын
Its 0.2mm Ustar scriber ❤️🔥
@lennardrannel Жыл бұрын
@@reygunplamy thank you so much!
@Garrett.111110 ай бұрын
Amazing work. I’m fairly new to this and about to do my first build with water slide decals. How necessary is the mark setter and mark softer? I haven’t used water slide decals in over 35 years and I just remember using water and having terrible results.
@grizz72719 ай бұрын
Third party decals like Delpi stick pretty well without setter in my experience, but doesn’t hurt to have. Softer works really well for decals going around curves or into recessed areas, and that’s something you apply only once you’re satisfied with decal placement because it will practically melt your decal in place 😅
@gustavoclarindo1017 ай бұрын
I am of the same opinion on the way the story will be similar to Kingdom Come Also 16:10 jumpscare
@chanvuang65904 ай бұрын
Yo ,can I ask why my x-20A thinner isn't erasing the messy panel lines?
@antoinep.25658 ай бұрын
Looking great! might you have the link for the musix you used? cuz its great too!
@afiqmirza975 күн бұрын
Itu pake air atau apa tuu?
@emmetthamill13577 ай бұрын
Are you using a dry qtip to erase?
@samxz619 Жыл бұрын
Damn u are doing go nice
@reygunplamy Жыл бұрын
Thanks a lot bro🙏🏻❤️
@Zelo_75914 ай бұрын
What's the grey marker thing for???
@darkmanch.4267Ай бұрын
what scale of Aerial?
@isaiahbatac1151 Жыл бұрын
What did you use for rescribing panel line?
@beaniebasil Жыл бұрын
beautiful! ❤
@reygunplamy Жыл бұрын
Thank you❤️🙏🏻
@eiqhwanpauzi5041 Жыл бұрын
berapa lama lepas panel line baru boleh apply decal and berapa lama lepas siap decal baru boleh apply top coat? please answer🥹
@reygunplamy Жыл бұрын
Panel line kering dlm 5-10 minit dh btl2 kering - tamiya 10-15 utk mr weathering color..utk water decal tggu dlm 5-8-10 mnt dh ble apply tc dh😊
@eiqhwanpauzi5041 Жыл бұрын
@@reygunplamy thank you so much!! almost 3 weeks lepas start Gunpla and persoalan ni baru terjawab🥹🙏🏻thank you so much really appreciate this❤️🔥
@DEATHMETALRUST4 ай бұрын
Clean
@Spaghettiy10 ай бұрын
How the hell do you get those panel lines so clean??? mine is never that dark, and at it’s darkest it brightens when I try cleaning it
@youraverageshitshow47159 ай бұрын
Ig you could try using less of the enamel thinner/ lighter fluid/ cleaning solution, have it just damp enough to remove excess, but not so wet it seeps into the panel lines themselves
@kaptennemo1043 Жыл бұрын
Awesome build, did you use top coating, if you do what type, gloss or matte?
@reygunplamy Жыл бұрын
Yeah I’m using Gx114 super smooth clear matte from mr hobby😊btw thank you bro❤️🙏🏻
@kaptennemo1043 Жыл бұрын
@@reygunplamy super nice bro 👍🏼
@christopherrubino3614 Жыл бұрын
@@reygunplamy Do you topcoat before panel lining? or only after? I hear mixed things. and what was the mr marker or whatever you used before applying the slide stickers?
@reygunplamy Жыл бұрын
@@christopherrubino3614 before plining I’ll gloss top coat due to enamel affect the plastic surface bcome brittle..and then matte tc after😊
@kenzoyt63985 ай бұрын
Halo bang ray bang ada buat topcoat before panel line?
@aegisalttt8 ай бұрын
I panel line with a thin sharpie is that bad? I really wanna know cuz I’m worried it ruins it
@nafishaziq Жыл бұрын
nak panel line ni macam mana ya... saya beginner tak tahu cara nak guna panel line dengan top coating
@SergiOrtiz Жыл бұрын
Tamiya panel liner over bare plastic?
@reygunplamy Жыл бұрын
I was applied semi gloss tc before apply the tamiya pl😊🙏🏻
@dr.jotarorobotnick8132 ай бұрын
I'm actually building this kit now and the stickers on this thing are the worst. I got the two red and yellow stickers for the shoulders stuck together trying to get them off the sheet, so I had to toss em since I couldn't separate them, and then I Lost one of the tiny stickers that go on the shoulder because they're so damn small, so now no matter what my kid is going to look wrong when I put it together 🫠
@daarrkness674311 ай бұрын
How do you cleanup the lines without totally removing them?
@muhammadfauzanakbar565711 ай бұрын
What color thinner did u use???
@reygunplamy11 ай бұрын
Usually I’m using mr hobby😊
@b.19project147 ай бұрын
becarefull,you can crack parts if apply accent without coating before
@Boorosan9 ай бұрын
Tutorial pleaseee
@dbcooper71598 ай бұрын
Need a video showing how to use setter.
@sebastienchenier7858 ай бұрын
No britteling???
@reygunplamy8 ай бұрын
Nope😊
@sithsenpai Жыл бұрын
What silver marker did you use and what did you use it for??
@reygunplamy Жыл бұрын
It’s Dspaie Gun Metal marker and I’m using it for colored on the parts
@ultimaweapon9842 Жыл бұрын
Is that dspiae grey marker?
@reygunplamy Жыл бұрын
It’s gun metal dspaie marker😊🙏🏻
@faizizmail404910 ай бұрын
Part tangan pakai apa ya?
@doomed_marine3347 Жыл бұрын
Do you have a link for the piano cover for The Blessing?
@reygunplamy Жыл бұрын
It’s from Ru’s piano❤️🔥 kzbin.info/www/bejne/hGTalXefp8akasksi=ogQhvKTwde0MHpxt
@doomed_marine3347 Жыл бұрын
@@reygunplamy thanks!
@cole96937 ай бұрын
Scribing is the key it seems, otherwise it just wipes off the panel line
@pokemoner_365 Жыл бұрын
Was that action base 2 stand? The red one?
@reygunplamy Жыл бұрын
That’s actually from my mg Astray red frame stand base😊
@SergiOrtiz Жыл бұрын
@@reygunplamyincluded with the kit?
@reygunplamy Жыл бұрын
@@SergiOrtiz actually that stand is from MG Astray Red Frame
@bryanwihen4970 Жыл бұрын
What decal did you use and where can you get them?
@reygunplamy Жыл бұрын
It’s fm aerial wd from evolution studio 😊
@virajkishore696010 ай бұрын
Is it master grade
@reygunplamy10 ай бұрын
It’s actually Full Mechanics but the size is same as mg which is 1/100 scale😊
@vhincelmendoza613 Жыл бұрын
How to make shadow lining
@oyst409 Жыл бұрын
what top coat do you use?
@reygunplamy Жыл бұрын
Mr color gx 114 super smooth clear🙏🏻😊
@epistarter1136 Жыл бұрын
@@reygunplamy you painted it onto it?
@mr.joshua20410 ай бұрын
I just hate how the slightest fall will break it
@aqilfirdaus03 Жыл бұрын
mata scribber tu berapa ya sesuai
@reygunplamy Жыл бұрын
Yg sya pakai kat video ialah 0.01mm genk😊tp utk scribing depend dgn permukaan part dan cara kita buat..kita ble pkai dr 0.01mm - 1mm
@VainComputer4 ай бұрын
My twitchy hands can't
@Toomanytransformers3 ай бұрын
Does anyone here not panel line their gunpla or is it just me
@CherylT-is9ui22 күн бұрын
some say Tamiya Panel Line will make the plastics 💀💀
@muhdizai8 ай бұрын
Aerial the ☕ gundam😅😅
@ベッキーベッキー-l6e Жыл бұрын
かっちょえ~!欲しい~。
@hv5013Ай бұрын
I clearly do not know what im doing.
@deltayanno54569 ай бұрын
Gundam earil mercury
@ycb955 Жыл бұрын
39
@motorcycle-man Жыл бұрын
Yoooooooo
@tsohgallik3 ай бұрын
😅 that's too much
@El_photobomber3 ай бұрын
I
@alexescobosa5029 Жыл бұрын
That looks gay!
@reygunplamy Жыл бұрын
🤣🤣🤣🤣
@nephlye11 ай бұрын
Nice job
@youraverageshitshow47159 ай бұрын
What song is this? It sounds familiar, but I can’t think of where it’s from
@Default6539 ай бұрын
It's a piano cover of the first opening from The Witch From Mercury.
@youraverageshitshow47159 ай бұрын
@@Default653 ah, I feel dumb now
@seandoesnpcshit9 ай бұрын
Tutorial?
@ATai-shitshit11 ай бұрын
水星魔女
@ryan046997 ай бұрын
Did you top coat it before using tamiya panel liner?