Gunpla Custom Build | MG Sinanju | Model Kit | MG シナンジュ

[@soseji]

The subtle gloss is really nice 👍

[@andylim132]

Damn. Elok sekali 👊🏼💪🏻💪🏻💪🏻👍🏼👍🏼👍🏼

[@megaflux7144]

such a great red!

[@paxiizuul3514]

Im super amazed

[@jek014]

Very nice coloring 👍

[@anub1s15]

damn that color looks good on the sinanju :o you may have just sold me a titanium finish sinanju MG (i don't have an airbrush nor the experience required to not ruin it so for me that's as close as i'll get :P).

[@incredibles2011]

Excellent 😍

[@MechaBorne]

This is the best looking Sinanju I've seen, the red is so accurate! The description says you used Anchoret Clear Red 039 and Mr Hobby Mr Color Deep Clear Red GX102, did you mix these two or use both reds separately on different parts?

[@HB_Studio]

Thanks for the compliment 😄 I used both reds separately on different parts ya😄

[@thatfakegod.]

Nice 🔥

[@d9_1056]

Perfect

[@chaiwatpotichanid]

รายละเอียดเพิ่มเติมอาชีพ..ใช่ในงานทีาเราถนัด😮..ลงสีโดนๆสดสวย...อายุการใช้งานตรง.พลาสติกกาวจบครบเหตุผล..ซื้อขายสินค้า..😮เด็กๆเริ่มยากแต่ดีที่ได้เริ่ม...เด็กบางประเทศโอกาสว่างน้อยๆลง..วิ่งหลบลูกปืนของผู้ใหญ่ๆจริง😂❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ตัดหมดอนาคตว่างๆมำโมเดล😢ครับชีวิตเด็ก

[@edgardoberrios2507]

Grabaste el proceso completo?

[@leesang1176]

That's a great video. Can you tell me what red color you used?

[@dim1723]

Think it is a candy red over silver. Trying to make mine look like red metallic or red foil.

[@trpkktrllng]

🔥🔥🔥🔥

[@shurai12]

This look amazing! just got this and going to paint it. when you paint, do you fully dissemble each part and paint individually? and the red is black-primer + clear red only? no red at all?

[@HB_Studio]

I disassembled most of the components and painted them individually. For the red colour, I applied a black primer as the first layer, followed by silver and finally clear red 😄

[@LL__aigend]

Wow, this is actually insane! My MG sinanju has some loose joints and connections. Do you have any tips for fixing that kind of stuff?

[@HB_Studio]

One trick you could try is using Tamiya cement to apply on the joint. Apply it a few times and let it dry, as this might help to tighten the joint

[@LL__aigend]

@@HB_Studio OK, thanks so much!

[@shurai12]

That look amazing! did you use any top coat? (i assume not necessary for the red part because of the clear coat) but for the best did you use gloss or flat coat?

[@HB_Studio]

I didn’t apply top coat on it 😄

[@dylancnguyen]

Do you find that the paint is any less durable without a top coat? Is it more prone to scratching or anything?

[@themayne6303]

Impressive. I have an Optimus Prime Earth Mode figure not assembled yet. Do you offer painting services?

[@HB_Studio]

Thanks. Yes, I do offer painting services. You may reach out my social media for more details.😄

[@themayne6303]

@@HB_Studio yes!!! Will do Thank you.

[@shurai12]

where did you get those metal beads thing?

[@HB_Studio]

You can purchase this metal beads at shopee😄

[@shurai12]

@@HB_Studio thanks, are they specially made beads for Sinanju or random hobby craft beads? not sure what to search for

[@HB_Studio]

Yes, those was specially made for Sinanju. You may search “Sinanju Metal Part”

[@Thelastdon85]

Is this the ver ka model

[@HB_Studio]

This is Sinanju OVA 😄

[@karentan6408]

🎉

[@ひゃっほい-ZGMF]

塗装を光沢にするか、半光沢にするか迷うなぁぁぁ～( ´ ▽ ` )ﾉ どっちも美しい！

[@leesang1176]

That's a great video. Can you tell me what red color you used?

[@HB_Studio]

I used Anchoret Clear Red 039 and Mr Hobby Mr Color Deep Clear Red GX102 😄