Gunpla Custom Build / SAZABI Ver.Ka LEG Part 03 - Panel line scribing

[@RAVIPLA]

◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry) [e-mail] or instagram DM (ravi_pla) Notice - blog.naver.com/jackers7/222348230829

[@HottoysandHotCoffee]

I can imagine the hardest part of this is then realising you've got to do the exact same thing again on the other leg! Beautiful work my friend!

[@travisbrueckner4457]

Thank you so much! I love doing gunpla, and painting them has been on the list of things I want to learn how to do, but man pannel lining and customizing them the way you do is the top of the list. I build the RG line intentionally so I dont have to paint them right now, and doing the extra work to make the pannel lines pop so I can just line them. Thank you for your wonderful work truly amazing!

[@RAVIPLA]

Travis Brueckner You're welcome. 😀 Thank you for watching the video well. 😄

[@RAVIPLA]

영상을 기다리실것 같아서 편집 완료된 것부터 먼저 업로드 합니다. 다음 영상도 편집 중 입니다 ^^ I think you're waiting for the video. So I upload the finished video first. I'm editing the next video.

[@cloane85]

Thank you so much for uploading this. It really gives me so many ideas on what I would like to do for future projects. Please keep these coming!! Good editing and clarity of the videos. Nothing was out of focus from what I could tell and that earned my subscription. Again, thanks for sharing!

[@RAVIPLA]

Carson Loane Thank you. 😄 I'll upload the video steadily.

[@abstrackten]

Pause on 11:57 and look for this gorgeous work

[@김상원-r7q]

Crazy quality. It's beyond this universe

[@kravmentality]

This is so clean, keep it up sir. From Philippines 🇵🇭 with love..

[@RAVIPLA]

kravden Jimenez Please let the Filipinos know my channel a lot. 😁😁

[@SebastianChan9119]

Why youtube not recommended this channel before? subbed!

[@RAVIPLA]

It hasn't been a month since I started KZbin. 😀Thanks :)

[@우또-e1p]

콤파스를 이용한 대칭 작업과 큰 패널로 추가 시 새로 가이드잡는거 잘봤습니다. 많은 도움 되었습니다~ 구독하고 갑니다~ 감사해요

[@RAVIPLA]

도움되셨다니 다행이네요^^ 구독 감사합니다 ^^

[@soulmate2632]

저같은 허저비는 감히 엄두도 못 낼 영상이군요. 쌍따봉 날리고 갑니다👍👍

[@RAVIPLA]

Mr. Lee 아니에요~ 일단 보시면서 천천히 따라해보시면 누구나 할수있는 작업입니다 ^^

[@goldencoil8624]

All of your videos are awesome. I like how you show in detail how to panel line the parts. I hope in the future you show and teach us how to use pla plates and how to paint Gundam.

[@RAVIPLA]

Yes. I'll try to help you. 😄

[@schubert06sebastian39]

Awesome! can you make individual videos of all the tools you use? I like your concept of showing things than narrating.

[@RAVIPLA]

I'll make a video about the tools I use. 😀

[@The2xclusive]

I was about to say the same thing amazing work hope to see the tool video soon I really want to jump into more modifications on my kits

[@RAVIPLA]

Do you want to know the list of tools I use and how to use it?

[@KarfontaAlec]

@@RAVIPLA A list would be great. I want to order them and try this right away. Also the detail parts like that mesh I'm having a hard time finding for a decent price.

[@古川卓浩]

A

[@domokun900]

where did you get the wire mesh? love the build.

[@alfrizadaffa1452]

As always, thats sick, goodjob man, always amuse about ur scribing, relaxing and informative at the same time 👍👍

[@RAVIPLA]

Thanks bro 😁

[@TomRaider410]

This is Gunpla's true love!!!

[@RAVIPLA]

Thanks 😄

[@XxbeyblademasterxX]

It's so satisfying to see you actually practice what you say and do it so well! Also do you reuse the tape as much as possible?

[@RAVIPLA]

Thanks :) Dust will reduce adhesion. So I don't reuse it.

[@t-macpie1410]

i'm new to this ,are those scribing tape?

[@Zellykins]

Wow, this videos are awesome to watch as well as relaxing. Subbed for future releases!

[@RAVIPLA]

Thank you for the compliment. 😁

[@sama.4085]

Can you please note the materials used in this customization. Links would be great. Thanks. Great job

[@stefanocastro2288]

Bellissimo lavoro Grazie per la condivisione

[@RAVIPLA]

Grazie per aver guardato. 😄

[@crazykid3280]

Amazing work !!!!

[@HTpng]

너무 멋집니다~

[@drekson23]

That is still plastic ofc is fragile from breakage. The time it falls or broke your effort would turn to dust. Cnc molding with stainless steel or materials that become super hard when heat treated would be awesome.

[@RAVIPLA]

Thank you for your advice.

[@행복론-t4d]

패널라인 신의손^^

[@RAVIPLA]

과찬이세요 ~ㅎ 좋게 봐주셔서 감사합니다 ^^

[@Myexoticexperience]

Just wow man! I can't wait to see the build.

[@RAVIPLA]

Please wait. Thanks 😄

[@blankstare3775]

Nice work!

[@RAVIPLA]

Blank Stare Thanks 😀

[@탄우아빠]

정말 대단하십니다

[@RAVIPLA]

좋게 봐주셔서 감사합니다 ^^

[@marsgaming7914]

Sup brother, That scriber you used to cut the piece, is that a 0.2mm?

[@RAVIPLA]

It's 0.15mm 😀 It's not a bmc product.

[@marsgaming7914]

RAVI PLA thanks brother 😅 👌 im using other kind of brands too, well works just fine...😇 God bless

[@RAVIPLA]

BMC products are good but It's expensive. Other brand products also have many good products. 😄

[@marsgaming7914]

RAVI PLA have 6 pcs of those came from china... decent enough... at least... hehe...not a branded one but sure will work enough for my needs... as of now while im still practicing...😅😅 i’ll have to watch more of you’re video’s to learn gradually 😁

[@RAVIPLA]

You can do well enough. 👍😀

[@7g6f5e4d3c2b1a]

*So Satisfying to watch!*

[@RAVIPLA]

Thanks 😄

[@Guthem]

Cheers from Brazil

[@RAVIPLA]

Please tell the Brazilian people a lot of my channels.😀

[@RamyDeeb]

That ruler that you used? Where can we find that?

[@RAVIPLA]

Purchases are made at a modeling shopping mall in Korea. I don't know the exact name of this tool. That's the etching ruler.

[@RamyDeeb]

Found a similar one on AliExpress for anyone interested www.aliexpress.com/store/product/Military-model-details-used-T-shaped-Ruler-Stainless-Steel/4670076_32963247406.html?spm=2114.12010612.8148356.9.e36d2fe4ya5qDF

[@RAVIPLA]

Wow. This product is correct. 👍😄

[@STEVILDOER]

true master.

[@RAVIPLA]

Thanks.

[@Jo-zq8vt]

I want to start this thing but I don't know what size (mm) of chisel to get, any advise? right now I'm into HG & RG line. maybe MG in the future. thanks

[@RAVIPLA]

I recommend 0.15mm if I choose only one. Both HG and MG are suitable.

[@Jo-zq8vt]

@@RAVIPLA thank you so much bro. keep it up!

[@fvd6553]

Amazing work and very helpful video!!!

[@RAVIPLA]

I'm glad I can help you. 😄

[@김승현-f8l]

디테일링하실때 어떻게 구상을하고 작업하시는지 초보들을 위해 영상제작부탁드려요....작업방법은 기존영상보면 대강을 알겠는데... 전체적인 디자인 구상방법을 모르겠어요..

[@RAVIPLA]

디자인 구상은 제가 마음에 드는 디자인이 나올때까지 직접 부품에 패널라인 패턴이나 디자인을 스케치를 해봅니다. 특별한 방법이 없습니다^^

[@김승현-f8l]

@@RAVIPLA다음 작품하실때 디자인 구상하는거라우스케치 하는거수올려주시면 좋겠어요.. 그리고 작업까지 ㅎㅎㅎ 담에 꼭부탁드려요..영상기다릴께요..

[@RAVIPLA]

김승현 디자인 구상은 머리속으로 하는거라 영상에 담을수 없고 스케치는 한두번해보고 결정하는게 아니라 생각이 안나면 하루종일 스케치만 해보는 경우도 있습니다 ; ㅎ 최근영상 보시면 일부 스케치하고 패널라인을 긋는 부분은 있습니다. 스케치를 여러번 해보고 지우고 또 다른 패턴을 그려보고 하는 과정은 영상에 불필요한 부분이라서 촬영 하지 않습니다. 최종 결정되면 촬영하면서 작업을 시작합니다. 스케치를 안하고 바로 머리속에 있는 디자인을 테이프로 가이드 잡으면서 바로 패널라인을 파는 경우도 많습니다. 절대 특별한 방법이 있는게 아닙니다^^

[@김승현-f8l]

@@RAVIPLA 네 답변감사합니다..그래도 시청자와 소통해주시지 고맙네요 😃 앞으로도 좋은 영상부탁드려요

[@RAVIPLA]

네 감사합니다^^

[@JARVISX]

what kind of mesh wire is that? I need to know, thank you in advance.

[@citizen2827]

틈 만들고 그 틈을 다듬는 도구 이름이 뭔가요? 먹선을 넣으려고 하는데 먹선 넣을 홈이 중간에 끊겨서 홈을 넣어주려고하는데 도구 이름을 모르겠어요

[@RAVIPLA]

먹선을 넣을 홈이라는건 패널라인을 말씀하시는건가요?.. 패널라이너 검색하시면 됩니다. 다른 질문이시면 다시 상세하게 말씀해주세요 ㅠ

[@citizen2827]

@@RAVIPLA 맞는거같아요 감사합니다

[@dpm911]

do you have a link for that tool you were using to line up the correct angles on the tape?

[@RAVIPLA]

I bought it at a model mall in Korea. This link was found and written down by someone else. www.aliexpress.com/store/product/Military-model-details-used-T-shaped-Ruler-Stainless-Steel/4670076_32963247406.html?spm=2114.12010612.8148356.9.e36d2fe4ya5qDF

[@dpm911]

@@RAVIPLA thanks!

[@최의영-d9p]

디테일 업할때 디자인은 생각하셔서 하는건가요 설정집이나 삽화같은거 보고 하시는건가요?

[@RAVIPLA]

최의영 네 제가 생각해서 작업합니다^^ 디테일 작업하기전에 먼저 디자인을 구상하고 작업에 들어갑니다. 영상에는 작업과정만 나오지만 그 전에 디테일 구상 및 스케치를 해보는 과정을 거칩니다^^

[@complexeddrummer]

Do you fully assemble the model before you start scribing?

[@RAVIPLA]

I check the work after assembling it temporarily. And start the work.

[@maximumchicken4518]

Is your 600 file sandpaper on steel?

[@RAVIPLA]

Yes, that's right. I make and use 400,600,800 respectively.

[@maximumchicken4518]

@@RAVIPLA Cool. I'll do the same to try be as amazing :)

[@RAVIPLA]

Vien Nguyen thanks 😄

[@Moonraker40]

Simply masterful!

[@RAVIPLA]

Thanks 😄

[@dearkaelsman5408]

I like it. 👍

[@RAVIPLA]

Dearka Elsman Thanks 😊

[@lucwatoa8775]

You only use an exacto knife for the panel lines?

[@RAVIPLA]

I only use the bmc chisel when drawing panel lines. It's easy to use because I'm used to it. 😀

[@Daddio66]

WOW you are awesome!! I hope some day be that good!!

[@RAVIPLA]

Thanks 😃😁

[@김상윤-r9d]

1:45경에 나오는 저 특이하게 생긴자는 이름이 뭔가요????

[@RAVIPLA]

Lemon BongBong 커스텀 에칭 이라고 검색하시면 나옵니다^^

[@김상윤-r9d]

@@RAVIPLA 감사합니다!!!

[@Love-du3kw]

구독했습니다 ㅎㅎ좌우대칭맞추는데 컴퍼스가 꿀팁이었네요 가이드테이프는 어떤제품쓰시는지 알려주실수있나용?

[@RAVIPLA]

HIQPARTS carving guide tape 3mm 입니다 ㅎ 일본제품이고요 품절이 잘되는 제품이라 재고 있을때 몇개 사놓고 사용하시면 좋아요 ㅎ 구독 감사합니다 ^^

[@スプリンクラーヘッド]

カッコいい！

[@RAVIPLA]

ありがとうございます 😀

[@狐水]

すごい！すごい！すごいいいいいいいいいいいいいいいいいいいいいいいいい

[@RAVIPLA]

ありがとうございます

[@user-ph6lk7eq5s]

미쳤네 와

[@RAVIPLA]

감사합니다.

[@NanochiTwitcharchive]

where do you get those etching parts at?

[@RAVIPLA]

I bought it from the Korean model mall.

[@dorittossenpai2268]

Did you use references for this or just free hand it?

[@RAVIPLA]

Dorittos Senpai I made free hand. I designed it and made it myself.

[@dorittossenpai2268]

@@RAVIPLA holy crap that's amazing your are freaking awesome :D

[@RAVIPLA]

Dorittos Senpai thanks 😀😀

[@jamescody7956]

So good!

[@RAVIPLA]

Thanks 😄

[@burinchatchaloy5146]

Very Cool

[@RAVIPLA]

Thanks 😃

[@minos6187]

@ravi pla do you think u can link the tools u used??

[@RAVIPLA]

I buy at a Korean model mall. I'll give you a list of tools later.

[@spectralimages8961]

Amazing! please I am new to these videos and have questions? :) why is it red, then white at end? How would you make a circle engraving? and with which tool Is the Tamiya glue strong enough? Thanks and I really enjoy yhe videos

[@theos17]

Its white because he probably put on primer

[@RAVIPLA]

Drill was dug out and trimmed with a blade (godhand spin blade). Extra Thin Cement is Strong enough for use in plastic models.

[@spectralimages8961]

@@RAVIPLAThank you all for response :)

[@bengkiatyap6751]

How long did you take to complete the idea/sketch and scribing for this part of the leg?

[@RAVIPLA]

I don't know the exact time because I work in my spare time. If I can think of an idea quickly. The work goes fast. 😄

[@dpm911]

also what kind of tape are you using?

[@RAVIPLA]

I used HIQPARTS carving guide tape 3mm

[@NETA_DIVISION]

Is that scotch tape?

[@RAVIPLA]

That's a guide tape. (HIQPARTS carving guide tape)

[@maikforte757]

The compass thing is fucking genius

[@RAVIPLA]

Thanks 😄

[@lucapedra4120]

TOP technique

[@RAVIPLA]

Thanks 😁

[@憶蓉-g7q]

非常厲害

[@OwnageMancer]

Gorgeous

[@RAVIPLA]

Thanks 😃

[@Castor2552]

Very nice, but need a lot of patience, wich i lack for the moment.

[@RAVIPLA]

Waiting for completion? Or patience with trying to work? Which translation is correct?

[@thedinosaurkidharun6533]

@@RAVIPLA I think he means this process of scribing detailing requires a lot of patience and he has little patience for it haha

[@kitikorniawsipo9029]

❤️

[@RAVIPLA]

❤️

[@boyjiei7765]

コンダム

[@aki007]

I tried this on rg rx78 and i failed. I guess it only works on 1/100.

[@RAVIPLA]

The parts are small. It's hard to work on the details.😅

[@고사리-y5e]

아우 보기만해도 손많이가네 저걸 두짝씩 해야한다는거...

[@RAVIPLA]

고사리 많이 하던 작업이라 손많이가고 두짝씩 해야하는건 별로 힘든일이 아닌데 저한텐 구상하는게 더 어렵네요 ㅎ

[@kemushi1000]

别人家的高达