Schneider Electric ATV12 VFD, remote control, 2 wire and 3 wire control, speed control. ( English )

[@dklancar]

Perfect video, keep up doing this!

[@Futbolnews12]

Right on the money! I found what I needed! Thanks for the videos!

[@IGSElectronics]

Glad to help!

[@hb5623]

What type are the 3 wire buttons? Are they from schneider? Could u send the productcode? They look very robust.

[@juliuschirambo2297]

Am falling to program this type of to work on R/F, please hey me on how to program this

[@eMTeaM10]

How do you wire the analog signals and the LI1/2? Sink or source wiring?

[@adilhassan338]

Parameter to change the Jog Frequency?

[@IGSElectronics]

Hello Fellow colleagues. If you enjoy the video please click that like button and if you did not, dislike it and let us know in comments, what was, that made you not happy with the content, so I can learn from it and make better videos for you in the future. Have a great day everyone.

[@dklancar]

I have one question. I have a machine whose speed of movement (forward/backward) is controlled via this VFD and potentiometer. The problem I have is, that if I set the speed on the potentiometer to 1 (from 1 to 10), then the motor (drive) rotates slowly as it should. But there is not enough torque (i suppose so) and the drive can not move the device which is relatively heavy. The machine has a gear ratio 20:1 but....Is there anything I can change on VFD to increase this? Thank you

[@IGSElectronics]

How is your motor windings set up, delta or star? if don’t know what that means check out the vary first video I have ever maid. Also its available in description.

[@yentepaternotte9953]

Hello. For my school project we use th atv12. We use the 2 wire control and a PLC sends the signals. That all works fine. but we also need to make it so that when th PLC sends a signal the motor will run at a lower speed. Do you know how to do that ?

[@IGSElectronics]

Hi Yente. Have you checked out the other videos for this drive on our channel.

[@neilscragg2148]

Hi, if your happy to just use the controls of the unit (run, stop, speed) is there a reverse option when required directly on the unit as I'm not noticing? or can you just add one simple switch via those connections to give you a reverse/forward feature, while using the units controls direct? Thank you

[@IGSElectronics]

Hi There. No, not for this drive unfortunately.

[@neilscragg2148]

@@IGSElectronics thanks for taking the time to get back to me, all the best 👍

[@kriteelchand8893]

Hi love the video, just a question. If you're taking your cables from the start/stop/forward/reverse buttons, is it necessary to use a sort of relay for engaging Normally open/Normally close contact's? OR can we just take the cables directly to the VSD terminals as you have done it on this video.. Thanks

[@Time4yes]

IS THAT A THREE PHASE MOTOR?

[@stuffthings9618]

Bro try speaking more clearly you sound like Harry Kane. Also you just start pressing buttons without explaining how to use the HMI.