Single phase output VFD controls 1-phase motor speed

ATO 1-phase VFD, single phase 220v/230v/240v input to single phase output.
Buy it online: www.ato.com/single-phase-vfd
(Note that correction is required in video: reverse rotation of the motor shall be connected according to the nameplate of the motor.）
This video shows the details of using a VFD to run a single phase motor on single phase power supply. Including wiring, parameter setting, speed control for single phase motor, etc.

[@ATOcom]

Note, P0.00=0 (V/F control mode, PA group does not need to be set), =1 (Senseless vector control, you need to set the motor parameter group PA)

[@vicentecarrasco8651]

When a single phase vfd if you make the configuration for start a single phase motor can use for brushed motor or can't?

[@sachinteli4873]

7090668486

[@engfadjfn2747]

I'm interested in your wonderful explanation way , thank you so much for this.

[@utamabudiman5315]

Nice video brother. Whether this tool can also simultaneously function as an inverter or contactor? Or indeed only for regulating motor speed/frequency?

[@manningcustom]

do you make one that runs on 120v and outputs 120v single phase?

[@mikefreedom5612]

Thank you for this video, do you have a VFD able to drive a refrigeration compressor (1ph and 3phase)?

[@ATOcom]

Yes，We have . 1- phase input to 1-phase output, www.ato.com/single-phase-vfd 1-phase input to 3-phase output, www.ato.com/single-phase-to-three-phase-vfd 3-phase input to 3-phase output, www.ato.com/three-phase-vfd

[@khaneleengineer150]

Thanks

[@user-kd7ue5vm7n]

Use for 5 hp can be used ???

[@mrbassey100]

I am so doing a solar project for a filling station, can I used the vfd device to control the surge current and where in the fuel dispenser machine do I connect the vfd to control the motor

[@zoozolplexOne]

Cool!!!

[@piratenu1]

Is it okay to run motor with the VFD without removing the capacitors? What are the advantages of running the motor with the capacitors?

[@ATOcom]

It is possible to run the motor without removing the capacitor, but the motor must run at the rated speed or the motor speed must reach the point where it leaves the centrifugal switch.

[@bladesworkunlimited5209]

Hello. I want to get one of these for my Baldor 1.5hp single phase motor. Which one do I need?

[@ATOcom]

Maybe you need this： www.ato.com/2hp-vfd-single-phase-input-output But don't forget to check your voltage and motor current parameters.

[@faizurehman2464]

Sir vfd solar se chalta hy kia??

[@baonguyenquoc198]

can i use this vfd to control both forward and reverse the single phase motor? and can this vfd control 2 motors at the same time ? thanks

[@ATOcom]

Yes, one VFD can control 2 motors, but the combined power of the two motors cannot exceed the total power of the VFD, which is theoretically possible, but in fact few people use it like this.

[@Serentocam]

You demo slowing the motor by reducing the frequency. Will it also speed up motors? I need to double or more the speed of two 3hp 2800rpm cap start induction motors (240v 50htz)

[@ATOcom]

I suggest you check the rated speed of the motor. If the motor runs over the rated speed for a long time, there is a risk of burning the motor, although our VFD supports higher frequency output.

[@johnbluebeard4355]

I looked at your single phase input/output, but all require single phase 220 volt input. Do you have any that would work in the US or Canada, where we have single phase 120 volt input?

[@ATOcom]

We have a VFD with 120V input, this link, www.ato.com/120v-vfd

[@johnbluebeard4355]

@@ATOcom I'm sorry, I wasn't clear enough. I just need a speed controller for a 120 volt single phase motor. I live in North America. Like most North Americans, I have 120 volt input. So, I need 120 volt input and output.

[@ATOcom]

@@johnbluebeard4355 Sorry, we do not have 120V input & output VFD at the moment.

[@johnbluebeard4355]

@@ATOcom Would the following work? Could I put a transformer inline between the wall and the VFD that would convert 120 to 220, hook that 220 up to the VFD, so the VFD would have 220 in and 120 out? The transformer I have in mind would be a simple torroidal.

[@ATOcom]

@@johnbluebeard4355 In fact, I do not recommend using a VFD to adjust the speed of a single-phase motor. The reason is that when the single-phase motor is running at low speed, the internal centrifugal switch may not be disconnected, which will cause the starting capacitor to always be charged and the internal coil of the motor will heat up. . Another reason is that the cooling fan of an ordinary single-phase motor is directly connected to the rotor. The lower the motor speed, the worse the cooling performance, which also increases the risk of the motor being burned. The condition to ensure that the single-phase motor is not burnt is that the operating speed reaches the speed at which the centrifugal switch can automatically disconnect, usually this speed is more than 80% of the rated speed. Therefore, the VFD can adjust the speed in this range, or the function of the VFD is only to reduce the impact of the single-phase motor on the power grid. If you have better ideas, we can continue to communicate.

[@clifjonejontilano3578]

can that be used for fridge motor 1/4hp 1ph 230v? if yes, do you have a link for that product in aliexpress? thanks in advance

[@ATOcom]

Sorry, Our VFD cannot be used for refrigerator motor.

[@ejkt6170]

@@ATOcom Why? it is a motor, please explain Thanks

[@johnbrevard5966]

@@ejkt6170 because the motor is attached to a high compression compressor, it takes a tremendous amount of torque to start, a vfd would not allow the motor to start slower due to the lack of torque, thats why when fridge comes on its harsh, because the cheap motor from factory has to give it everything it has to start the compressor, That is why they rarely fail running, always on startup because of the High Demand

[@docteurdre8450]

Is this model GK3000-1S0015 you can control single phase 220v 2 hp motor and this controller managed forward and reverse olso .

[@clifjonejontilano3578]

do you sell to Phillippines? i need one of that fo my experiment.

[@ATOcom]

Yes, free shipping to Phillippines, www.ato.com/single-phase-vfd

[@johnsymmonds3495]

I have a sealed single phase motor (so cannot get to terminal block) so I have a 4 core cable coming out of the motor... two go to the capacitor with the other two being live and neutral.... how do i connect it to my recently bought GK3000 vfd.... apologies for silly question but I am stumped how to do it

[@ATOcom]

Please contact our after-sales team to describe the problem you encountered.www.ato.com/contactus

[@MM-vi9kh]

Excuse me For 1500 rpm motor Is there any effect on the motor if we run it on 1200 rpm continuesly?

[@ATOcom]

It's ok

[@shaktigholetar8236]

Sir brand konsa hai iska manual mil sakta he

[@andersonjubay6118]

Is this vfd applicable to single phase ac motor with only running capacitor and no starting capacitor?

[@ATOcom]

yes

[@nurahmedomar]

Can 1-phase input to 3-phase output VFD be used as 1-phase input to 1-phase output?

[@ATOcom]

ATO's VFD is ok, but the power level of the VFD must be more than doubled.

[@yannist5050]

I bought the ATO GK3000 VFD and need to operate a single phase motor 0.37kW. Can the VFD operate in a single phase input to a single phase output and how can I achieve this outcome. Currently I've been having difficulties.

[@ATOcom]

Please send an email to our service mailbox, and submit your order number and the problems encountered, our after-sales team will serve you. contact us, www.ato.com/contactus

[@christopherconkright1317]

I wish people would talk and explain off to a new vid

[@Sei__ro]

hello. I want to know if 1 phase motor could change direction rotation or not? from forward to reverse

[@ATOcom]

You need to follow the wiring instructions on the motor nameplate to reverse the motor.

[@Sei__ro]

@@ATOcom can I use VFD to cange the rotation?

[@ATOcom]

@@Sei__ro It cannot change the rotation of 1-phase motor, ，，，，，，3-phase motor can.

[@markodonovan9921]

Do you manufacture a suitable VFD that can be fed with DC from solar panels, has MPPT and can run a submersible well pump 3 phase from .37-.75 kw ?

[@markodonovan9921]

The acceptable frequencies for the particular motor are 30-50 hz

[@ATOcom]

@@markodonovan9921 This link， www.inverter.com/solar-pump-inverter

[@camillekahil6073]

Hi, i have a single phase motor 240v with dual capacitor start and run 3hp will this VFD run it?

[@ATOcom]

Yes, www.ato.com/single-phase-vfd

[@otabektillavayev3309]

Zoʻr

[@khaleddhr6238]

welcome,Does this vfd suitable for single phase submersible motor 3HP 2.2kw AC with 16 solar panels 250W ?

[@ATOcom]

what is your voltage?

[@khaleddhr6238]

@@ATOcom if you mean voltage of submerisble motor is 220v or 230v

[@ATOcom]

@@khaleddhr6238 1. I noticed that you are using solar panels and the electricity they output should be DC, so what you need is a VFD with DC input to AC output. Sorry we do not have this model. 2. If the input voltage of your solar panel has become AC, then you only need to find a VFD that matches the power of your motor.www.ato.com/3hp-vfd-single-phase-input-output 3.But it should be noted that single-phase motors are not suitable for long-term operation at low speed when using this VFD.

[@khaleddhr6238]

@@ATOcom i want to run my submersible with solar panels only without any battery with VFD but i don't know which vfd suitable for me . i do not had any electricity.

[@khaleddhr6238]

@@ATOcom Thanks number 2 is what i need .

[@f8ful01]

is this working with single phase 220v 1hp water pump motor?

[@ATOcom]

yes

[@LipuPatel]

Solar se connection hoga kiya

[@jasimnc7056]

i need 10nos vfd (german made ) for single phase motor 1.5 hp 230 voltage 7.3 amps application duplex water booster pump pls reply me

[@ATOcom]

Sorry, we don‘t have VFD made in Germany.

[@edgarhey3161]

do you sell to Peru?

[@ATOcom]

Yes

[@JorgeGarcia-sb4oe]

How can I reset from code E-01 and E-03 to factory settings to reprogram the VFD. Voltage is 220V. When I have a frecuency of 0, my error is E-03 an when the frequency is different to 0, my error is E-01.

[@ATOcom]

When E-03 or E-01 occurs, it usually means VFD overcurrent. You can try no-load debugging, or reduce the load, or change the V/F curve, or replace the VFD with a higher power. It is also possible that the VFD is not compatible with the motor. Because we don't know which version of your VFD you have yet, we can't tell you which code to modify. Please contact our after-sales team on your purchase homepage and provide photos of your VFD nameplate and motor nameplate. So that our after-sales engineers can analyze it.

[@melalbano6351]

Can it reduce starting rush current?

[@ATOcom]

Yes

[@yannist5050]

How can I reset from code E-07 to factory settings to reprogram the VFD. Voltage is 236V

[@ATOcom]

set P3.01=10

[@yannist5050]

I bought the ATO GK3000 VFD and need to operate a single phase motor 0.37kW. Can the VFD operate in a single phase input to a single phase output and how can I achieve this outcome. Currently I've been having difficulties.

[@shishpal6600]

Hloo friends iska price kya hoga please reply me

[@eduardoaguilar4736]

Can I input 220v 60hz?

[@ATOcom]

Yes! 1-phase to 1-phase ATO VFD price link, www.ato.com/single-phase-vfd

[@Pendawa_Diesel_Plus]

How to drive 1 phase motor with VFD output 3 phase?

[@ATOcom]

We have 1-phase to 1- phase VFD for 1-phase motor, www.ato.com/single-phase-vfd

[@Mrshahrulanwar]

can you show the amp when start..i want to see it

[@ATOcom]

You can press "》" to view the -b-parameter, one of which is to display current.

[@kdlee4479]

I have a single phase, single capacitor motor. It comes with 4-pole connections namely u1,v1,u2 and v2. Can this be used and how can the wiring be done?

[@newshinemotor2171]

I have a same qwestion 🤣

[@mcglothlincutlery725]

I have a 120v single phase belt grinder. Its 1.5hp. Do you have a single phase input and output for 120v that supports 1.5hp. Thanks

[@ATOcom]

We have Single Phase 120V Input, 1ph/3ph 220V Output VFD. the link ,www.ato.com/single-phase-vfd

[@mcglothlincutlery725]

No I have yet to find a vfd to work. My grinder motor is single phase.

[@samtheboss6274]

How do I factory reset the vfd

[@ATOcom]

If it is the same series of VFD, you can set P3.01=10.

[@ecpoultrycare6241]

It can run for 1.5 hp single phase motor

[@ATOcom]

yes, buy it on: www.ato.com/2hp-vfd-single-phase-input-output

[@madhumahanta4307]

Hello sir namaskar ( Fe Fuji vfd.) 1.5 kW/2hp ksb company ka pump hey sir 160 volt 3 phese. 9.5 ampire ka pump hey sir 30 feat Mein Dala gaya hai Fir Bhi Pani kam Nikal Raha Hai sir Mara vfd 37. Se Aage frequncy Nahin Badh Raha Hai aur Pani bhi kam de raha hai Main Kaise ise 50 frequency tak key se le jaunga sir. Emails id pleas sir

[@cheapmod]

i think that is 3 phase motor

[@ManVsOven]

Uh... what's the name of the piano music around 12:00? I'm asking for my wife...

[@ecpoultrycare6241]

I want drive for 1 phase motor 1.5 hp motor

[@ATOcom]

Yes, maybe you need this model: www.ato.com/2hp-vfd-single-phase-input-output

[@Shandilya1964]

Price for 1.1 kw

[@ATOcom]

price link, www.ato.com/2hp-vfd-single-phase-input-output

[@Coyote973]

Don't understand quite well. Your VFD has three outputs, so it's not a single phase output.

[@jameelsheik]

Brother third out put is for capacitor.

[@melalbano6351]

Local Philippines supplier available.

[@mick1gallagher]

Does this man understand why are live and neutral coming in and three lives coming out

[@madhumahanta4307]

Hello sir namaskar ( Fe Fuji vfd.) 1.5 kW/2hp ksb company ka pump hey sir 160 volt 3 phese. 9.5 ampire ka pump hey sir 30 feat Mein Dala gaya hai Fir Bhi Pani kam Nikal Raha Hai sir Mara vfd 37. Se Aage frequncy Nahin Badh Raha Hai aur Pani bhi kam de raha hai Main Kaise ise 50 frequency tak key se le jaunga sir. Emails id pleas sir

[@dant8795]

It