Schneider Electric Zelio logic controller wiring, program upload/download with Free Zelio Soft. Eng

[@jonadanpaulino7212]

Thank you very much for your excellent willingness to provide all your experience and knowledge for us.

[@jomaxtor4186]

Hello, I have an SR3B261FU model controller, At this point I need to save the events and when I need to look at these events, that is, when the sensor at the input was triggered

[@poet99999]

can you manually force I/Os? i need to see if my outputs are properly firing

[@hamedokhravi4066]

Hello, I have an SR2A201FU model controller, the problem is that output number 2 is permanently closed, I want to replace output number 7 with the previous output through the keyboard on the controller, is it possible?

[@aliabed9394]

Please, is it possible to design a fuzzy controller with zelio soft?

[@michaelcostello6991]

Excellent Explanation. Thank you

[@chempro4295]

Excuse me, how can I display the time in minutes and hours on the front of the Zelio FBD?!

[@sangeethaas6112]

What if com port not detected? What could be possible reasons and how to troubleshoot same

[@heinrichmuller4783]

Why after years of working my Zelio stops the program by itself? If I press run it runs again, with no problem.

[@BigkidscarPassion]

How much is the at most current for input?

[@mohamedredha8607]

Can we remove the USB cable once the program is transferred to the PLC?? I

[@gnengenharia]

clp zelio sr3 b261fu is compatible with io expansion sr3 xt141bd? Hi. Is it possible to download the program in zelio soft2 into the physical zelio clp sr3 b261fu using SR3MBU01BD? I don't have the serial programming cable.

[@IGSElectronics]

You will need the programming cable for you to be able to upload program to your laptop.

[@gnengenharia]

@@IGSElectronics oh =/ i don't have cable programming. =/

[@IGSElectronics]

@@gnengenharia You will need to get cable to be able to edit the program, if you are using the memory card for just transferring the program from one controller to other, that is fine, but if it requires editing as specially if you are adding extra ad dons, cable is the only way.

[@meowsoftware7258]

Between Zelio SR3 vs Omron CP1E, do you think which is more reliable ?

[@achillies40]

DOes anyone know where I can get the software for a Schneider Zelio SR1 Smart Relay? I can't find it anywhere. The CD I have it on will not load for some reason. I have tried it on a 32bit machine and it still will not load.

[@bobhayes699]

Thank you for this video and for sharing your knowledge and experience. I'm just trying to understand whether or not this will work for my project. I need 4 inputs and 4 timed outputs which will operate separately and one at a time. seems simple enough.....thanks

[@andeyocalientemart1379]

hi can you do a turorial with zelio and hmisto05 and hmisto735 running with operator terminal expert basic license? thanks

[@andydemin3105]

started with plc with moeller and my first ever job was with telemecanique .... and the job was 90% to change telemecanique to siemens S7 ( first years for S7 ! )

[@jonadanpaulino7212]

Good morning my dear, pleasure to greet you from the Dominican Republic.I have a plc and I want to make a backup but it has a password, what can I do?

[@legendarylightningcrimsons6138]

My name's zelio OMG! And I'm an Eleven year old boy!

[@andyjones7836]

Thanks Ingus - nice and simple, can you "transfer" the program from one unit to another (say the unit is faulty) even if it has a password (with the program or the memory stick)?

[@IGSElectronics]

Am not sure about the memory stick, but if it is password protected it will not let you pump the program out in software. I will check it out in the future if it is possible with memory stick.

[@andyjones7836]

@@IGSElectronics Thanks, we had a Crouzet controller that was damaged, so we bought a new one which came with the program and lead (similar to the lead you have), but it was password protected. We did not want to change the programming just transfer it from the damaged controller to the new one and keep it password protected. This was on a air handling unit (AHU). it would be useful to know whether we could port the program over with a memory stick and how to do it. Its probably simple, but we did not purchase the memory at the time. Many thanks Andy.

[@ZayyarlinLin]

Can you teach me how to lock on

[@watchmankerron703]

Please do an automatic washing machine ladder logic video

[@dennisrubio2375]

I need help sr

[@keith6085]

Looks like the Crouzet

[@andydemin3105]

nice how easy this works for simple stuff takes only a sec to get the idea how this works , comming from the unusual shit siemens throws at you in TIA just to get a fkn flipflop

[@hindustantechno3132]

Apaki bhasa mujhe samajh men nahin aati hai hindi men bhi training videos hai