GWM CANNON MANUAL ROLLER SHUTTER DIY✌️

We finally have a video to help you guys install our roller shutter👍
You can purchase the roller shutter from Savage Tech Australia
savagetech.com.au/products/gw...
Really hope this helps you guys and thanks so much for your support🙏
#gwmcannon
#savagetechaustralia
#gwm
#greatwall
#haval
#cannon
#poer
#pao

[@wheelsbytheocean]

Can't wait to install mine next week!! So happy this vid exists haha!! Thanks guys!

[@courtenay1527]

Nice work man

[@samperras]

Nice instal

[@lzs19860610]

Does it also fit with cross bar on top ? Thanks

[@courtenay1527]

👍

[@spf4x4]

Nice work, got a push button myself as i'm to lazy and short to get in and pull it out when the rope breaks. #spf4x4

[@jeffbrett8841]

Thanks guys. Did a DYI install today. Not bad for a first timer (4.5hrs). Could not have done it without your video. Doesn't seem to be rolling on tracks all that smoothly (stiff). Should I use some form of lubricant or is there another remedy that could assist?

[@SavageTechAustralia]

Make sure to open the track width, if they are too close the roller will have no room to slide. And yes use silicone spray thanks.

[@kelvinjsteiner]

How much including installation

[@billbailey9946]

Hi do sell a tow pack for the cannon Ute if what would be the cost with delivery to vic 3429 Also have you posted a installation video Bill

[@paulygards9500]

Hey guys, great tutorial vid, but I have question for you, I’m in Perth and gonna purchase a gwn Ute in next few weeks and would want roller shutter as you fittin in clip there. You have outlet here at all in Perth? Or can recommend any fitters here that are competent? Thx

[@SavageTechAustralia]

Yep our dealers in Perth called SM Mechanical please order thru them

[@devonnaidoo-om2be]

I'm from South Africa looking for the back p sign

[@hambo76]

Do you know what the four bolts are that come with the sports bar? I seem to have misplaced mine so I'm hoping I can pop to Bunnings to get some.

[@SavageTechAustralia]

M6x30mm button socket

[@hambo76]

Some questions! Can the sports bars still take a bit of load? For example a few lengths of wood from Bunnings? What anti-seize do you use? Is that Loctite Red or Blue?

[@SavageTechAustralia]

Would not recommend it as the bottom plates of the sports bar are literally tacked on.

[@SavageTechAustralia]

Blue is fine

[@hambo76]

@@SavageTechAustralia Mmm bugger, are there any solutions for taking a little bit of load? I'm not talking about 200kg of wood, just 3 or 4 lengths like.

[@SavageTechAustralia]

Tub rack or cross bars we sell mount on our rollers will take a decent load

[@carltondow-philcox2617]

Just installed. Is there a video how to setup the pin lock? Or instructions? Cheers 🤙🏽

[@SavageTechAustralia]

The default factory combination is 0-0-0. To set your personal combination, please follow the steps below. Turn the number wheels and set them to 0-0-0 so that they are clearly visible in line with the marking. (1). Using a pointed object, carefully push in and hold the button located beside the pin code (2). Whilst holding down the button with a pen below 👇 Next, turn the number wheels to your desired combination in line with the marking. Press the button on the top again. (3). Your lock can now be opened using your personal combination. Please make a note of the chosen numbers, as the lock can only be opened with this combination,

[@carltondow-philcox2617]

@@SavageTechAustralia thank you, appreciate it 👍🏽

[@willyang5751]

where are you guys located? Thinking of getting a canon and get it fully equiped..

[@SavageTechAustralia]

Savage Tech Australia 1/5 Westerway St, Slacks Creek QLD 4127 0478 619 836 g.co/kgs/A2qUDV

[@jspilly82]

has anyone developed a tradsman tray\canopy for the cannon yet? I want to buy on as a business trade vehicle but the tub is not suitable to work out of.

[@SavageTechAustralia]

We have a steel canopy on the website.

[@screedzzuaqub6133]

@@SavageTechAustralia hi mate can I install the sports bar after roller shutter ??

[@SavageTechAustralia]

@@screedzzuaqub6133 yes we can easily

[@dorianjohnston6537]

One confusing bit is why you have the Right Side hole positioning sheet on the LEFT side of the vehicle???

[@SavageTechAustralia]

No idea lol. Realised after we produced the video

[@TimeLapseMat]

If it helps anyone watching, I did this install Apr 2024 with what seems to be a newer model, and following the video with the 5mm gap but using the correct left and rights everything aligned ok for me

[@Auxbeam]

Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!

[@damianastone]

mate I don't think you should drill it into your tail light area.

[@SavageTechAustralia]

In what part of the video have you seen us drill into the car when installing this roller shutter?

[@irvinghood6505]

☺️ P-R-O-M-O-S-M.