This is exactly what I want to do with my GX, thanks for the video!
@KGX470 Жыл бұрын
just did this and I like it. One thing I suggest to everyone is to use Locktite on the fog light nuts that adjust it up/down. I tightened it down snug, but after driving around....the nuts came off the bolts and sitting somewhere in fog housing.
@revolvinggarage5425 Жыл бұрын
Good advice!
@SpiritsandNature2 жыл бұрын
thanks for the insight, looks great on your gx
@kendoc0112 Жыл бұрын
I did this and love it. Thanks for the inspiration.
@revolvinggarage5425 Жыл бұрын
Awesome!
@Rille13032 жыл бұрын
Great vid hope you post more thanks! Will be doing this to my GX
@skrinix2 жыл бұрын
thank you for the video, going to tackle this project this weekend!
@revolvinggarage54252 жыл бұрын
Good luck!
@ajanaya100 Жыл бұрын
Thanks great idea for my GX470
@robstone67112 жыл бұрын
Just ordered and will be doing this! Thanks
@revolvinggarage54252 жыл бұрын
Good luck!
@supergreenproduction28472 жыл бұрын
nice and yellow, i like it.
@thecramirezvill2 жыл бұрын
Pure awesomeness!!
@supitown60137 ай бұрын
Nice bumper chop!
@charlesroyal2545 Жыл бұрын
More content! Your videos are very creative.
@revolvinggarage5425 Жыл бұрын
Thank you!
@TeamFish15 Жыл бұрын
Those are dope!
@revolvinggarage5425 Жыл бұрын
Thanks!
@mattwernecke2342 Жыл бұрын
Nice tutorial! Thanks!
@yiayang34032 жыл бұрын
Looks amazing. How is it during foggy and raining nights? Does it actually help out? I been debating about doing the same but don't want to do it if it doesn't help. If you can make another video and pin a link on the comment. It would be great!
@revolvinggarage54252 жыл бұрын
The lights act more as flood light because of how bright they are. If you wanted some specially for fog then I’d go for the name brand.
@tvhelcap6122 Жыл бұрын
Hello! Great idea, but you didn't show the main thing: how it works in fog or at night.
@InfidelGarage Жыл бұрын
Just got a GX and I'm looking to eo something clean like you showed. Great video. Have you had any issues with the lights overheating in the sealed housing?
@mcodyw2 жыл бұрын
Now that you’ve had it for 4 months would you make any changes? I’m about to do the same thing. Thanks for sharing!
@revolvinggarage54252 жыл бұрын
All has worked perfectly for me
@mcodyw2 жыл бұрын
@@revolvinggarage5425 did you put in the hack so that those lights stay on with your brights enabled?
@babyh21212 жыл бұрын
Awesome walkthrough. Did you just use 16 AWG spade/fork connectors? Will a 12 AWG fit?
@revolvinggarage54252 жыл бұрын
I’m honestly not sure of the name. I just used what I had on hand.
@babyh21212 жыл бұрын
@@revolvinggarage5425 my bad, I’m referring to the gauge of the connectors you’re using.
@Rille13032 жыл бұрын
What yellow tint did you use? Can you share that link if possible? Thanks!
@ryanduffy89942 жыл бұрын
What tint did you use for the yellow? I like the color of it
@revolvinggarage54252 жыл бұрын
Amazon tint lol
@pete3687 Жыл бұрын
This may be a dumb question but do you think it'd work as well if you had put the yellow tint on the pod itself and not on the actual fog light? I have the dark blue GX and would rather keep the fog light clear.
@revolvinggarage5425 Жыл бұрын
Yes, just buy the yellow ones, they come yellow.
@ml9898 ай бұрын
Can you just change the bulb for an LED bulb for the same result in brightness?
@revolvinggarage54258 ай бұрын
I’ve never seen a bulb produce the same output. But could be worth a shot sure
@diydaddy50922 жыл бұрын
Fantastic job!! Any heat build up issues inside the housing?
@revolvinggarage54252 жыл бұрын
I’ve never checked temp, works great so far
@philwarren3581 Жыл бұрын
Did you make a video for cutting the front bumper plastic?
@revolvinggarage5425 Жыл бұрын
Yes, if you click on my profile it’s the previous video to this one
@c.a.nixiii4650 Жыл бұрын
How is the heat with it sealed? Any melting of the plastic?
@c.a.nixiii4650 Жыл бұрын
You could have just taken off the hardware and put the unit in an oven at 200F for 10 minutes and just popped off the front clear plastic as the glue would be soft. Then you would not have had to cut the back off! 🤦🏻♂🤦🏻♂
@mcodyw Жыл бұрын
How do you keep the fog light on when you turn the brights on?
@revolvinggarage5425 Жыл бұрын
There’s a hack you can do with a relay under the hood. Give it a search on a GXOR forum
@TheMisterKarolek2 жыл бұрын
Any photos/videos of how they look at night?
@revolvinggarage54252 жыл бұрын
Yes, I unfortunately can’t add a video in the comments though. I posted on GXOR Facebook group if you’re on there
@TheMisterKarolek2 жыл бұрын
@@revolvinggarage5425 sweet just saw it thanks
@Concertto2 жыл бұрын
So if the light eventually goes bad would you have to replace with exactly the same light?
@revolvinggarage54252 жыл бұрын
That’s what I’d do
@Concertto2 жыл бұрын
Alright thanks for the great how-to video.
@greenacres45182 жыл бұрын
Mr spastic hands
@c.a.nixiii4650 Жыл бұрын
And the lights also come in Amber. No need to wrap them. So much extra non needed effort! 🤦🏻♂🤦🏻♂