Děkuji Vám za krásné video a ukázku dokonalé práce. 👍✊👏
@BrokenRRT7 жыл бұрын
I learned more from this video than I did from a group setting class!
@flyingcheff9 жыл бұрын
Very much wondering why no "setting" burs, I thought they were the exact shape of the solitaire shape in round calibrated stones (machine made CZs). I have never seen this way of opening up a stone setting by eye. Fantastic, love to learn the new stuff! Can't wait for the whole course! Wonderful!
@AnneAndersonFoxiepaws6 жыл бұрын
Yes doing the City and Guilds as a school leaver going into the trade is the only way to get proper training unless you happen to have £6000 Upwards to spend per year plus materials and living expenses which makes it pretty much impossible. But I have managed to learn a great deal from Soham and a couple of other people, which I wouldn't have had access to, were it not for KZbin. I am really grateful for all the hours of tuition Soham has put in. He's a great teacher and I will be indebted to him always. I want to be able to make jewellery from beginning to end and I think the more I learn on here, then take the information and practice until I am happy with the end result, the closer I am to achieving this.
@m.menheere82648 жыл бұрын
Have done some stone setting and spend too much time on my knees searching for the 50 dollar rock stone ;-) Thanks for the quality video en recorded craftmanship
@2hardbackrub7438 жыл бұрын
+Marcel Menheere lmao they want to jump out so often.
@caterinaconti74348 жыл бұрын
Excellent video of gypsy setting.Very clear. Much better than the in person class I took. Thanks.
@skeeter500019 жыл бұрын
This was a very informative video. I was impressed as to how he set the stones, springing them into the holes after cutting the groove to latch them in. Very good, and good work all the way. Thanks much.
@LarryDallas6 жыл бұрын
Great video Peter, I like the way you make the flush setting. The way I was taught is not working very well. On the beading tool how much of a point is there. I have made burnishers from worn out burs. Thanks Peter for sharing this video.
@royharris19 жыл бұрын
Mesmerising! Such workmanship and skill!
@rumi87246 жыл бұрын
I love your work. Thank you so very much for your patience and explanation. You are a grand Maestro.
@syedzaidi52597 жыл бұрын
3:34 what a beautiful sound
@boumlik84764 жыл бұрын
perfection sound :)
@carianin52935 жыл бұрын
Yes, I'll be purchasing a hart bur asap. More practice needed. Lots of it. Thanks for this video. Awesome, Peter!
@user-gf4xo1lt4p9 жыл бұрын
Большое СПАСИБО! Все понятно. КРАСИВО работает!Золотые руки. Я учусь по Вашим прекрасным фильмам. С уважением Зинаида.
@MABO076 жыл бұрын
Can you burnish set a small diamond low cabochon? I know the brilliant cut stones have a flat top and the cabs have the higher walls but was just wondering if it’s possible. I only do bezel settings now but I like the look of the burnish setting but all I have are these low cut cabs to work with and i would like to flush set them.
@ArtsCraftsJoe6 жыл бұрын
Great video. Like the way the stone snaps in! Cool the way you use the hart burger.
@catnelson30649 жыл бұрын
Soham - is Peter using petroleum jelly on his burrs? I am so glad you two are so close that he has agreed that you provide these two videos. That is very kind of your mentor and shows me how much he thinks of you (if at all possible, I think even more of you!).
@1soham16 жыл бұрын
i am prety sure he is using "burrlife" i use honeycomb
@gottheilj9 жыл бұрын
I believe Mr Keep does not take questions here.
@1soham19 жыл бұрын
Jerry Gottheil true, go to his web site and he will.
@richardnelly72297 жыл бұрын
i really love your work beautiful Ring. this is my dreams job😘😘
@helen8989 жыл бұрын
Thanks. Wonderful instruction.
@mimardelplata4 жыл бұрын
What tool from GRSis better to set the stones the vice ball graver or the one he is using ?
@jaykay4156 жыл бұрын
Peter Keep might not be aware of any questions posted to this video...I'm wondering what sort of magnification y'all use for setting teeny stones like this? I have a 3X and 7 or 8x [I forget?!] Optivisor. No microscope or anything. Any other ergonomic tips?
@1soham16 жыл бұрын
he is available on jewellerytrainingsolutions.com.au but i think he uses a 7
@jaykay4156 жыл бұрын
Thanks soham harrison!!
@chrisday34259 жыл бұрын
Great video as all utubes are and thanks for sharing.
@donnaanasse51772 жыл бұрын
I cant find the info where the website is with the skill levels.
@katiejo1095 Жыл бұрын
Beautiful
@Maher-6 жыл бұрын
what to do if i accidentally eat from the metal and the stone go out of its place, how to fix that? thanks
@salchichita19719 жыл бұрын
Thank you so much!!!!!
@victortsykunov5 жыл бұрын
We're is Soham?
@kitnkabootles4 жыл бұрын
Thanks a lot for the lesson! I think you'd get more views with better thumbnails. I can definitely help you out with that if you want. just hmu
@deliosanz97418 жыл бұрын
very good
@Kittens_Cats_Karma9 жыл бұрын
Please loose the disruptive, irritating, and annoying background music. It's a pity to spoil otherwise such a good instructional video. No background music in schools, universities, etc. for a very good reason.
@BrokenRRT7 жыл бұрын
Kitten Mom - if that low volume music distracted you while learning this for FREE from a master tradesman then you will not be able to do this ever! I went to school to be a practitioner and every class I went was way more disruptive than some low volume background music. In class and while doing clinical in a hospital it was chaos everywhere and we were able to still learn our trade. If you're dedicated and interested there isn't anything other than physical contact that should disrupt you in learning from this video! Get your panties out of a bunch and appreciate what's being taught instead of focusing on the nonsense!