Finally had a reason to ride the YZ after a Month or more. I really enjoyed discovering the benefits of that GYTR parts! #gytr #yamaha #yz250x #yz250 #yz450f #yzfamily #yz250f #yz250fx #yz450fx
Пікірлер: 21
@abimaeltorresvalle71856 ай бұрын
Wow, she sounds amazing and seems super fast!
@nvmcrider84756 ай бұрын
I put an 11 ounce steahly fww on my yz 250 and it was a huge improvement for offroad riding
@ottokirk23256 ай бұрын
I think this X model tune doesn't need to go heavier. Considering where you ride. Ive seen that you are looking to port. Perhaps you need some YZ spec items, like CDI or an actual YZ. Good to see you got it woth a better setting. I have a buddy with a 125X. He ran the STIC metering block and he says that a FWW, taller tire and down a tooth on rear sprocket had no imact on power. He also tested at 36° to upper 80° F. No need for adjusting the carb. BTW, he decided to reduce power by moving to the Lectron Pro Series, as it wasn't too abrupt and potent. He was actually wanting to have to use the clutch more like a 125 rider. He also really wanted to test for Matt at Lectron. They had previously done Applied head and STIC testing. Good videos BTW.
@roberturmosi-dirtbike-atv6 ай бұрын
I just like to get a bit more out of the engine down below That's what I'm after. There is many way to do it. Thanks for the info
@michaelgarland5793 ай бұрын
@@roberturmosi-dirtbike-atvtry apex head an lectron carb that what I have yz125 2003 an it runs strong 💪
@roberturmosi-dirtbike-atv3 ай бұрын
@@michaelgarland579 I'm sure those are work well! Definitely better than the stock set up
@jonsainsbury87265 ай бұрын
Even with the flywheel, the bike is still rippy, it takes the edge off and helps reduce stalling ...
@tf8416 ай бұрын
Pretty bike! I wish I could buy all of them!
@yuriabmxr6 ай бұрын
I have read a lot of people recommend flywheel weights on YZ250s. Personally, the snappy, responsive nature of the engine is one of my favorite things about the bike. I'm not convinced it's right for me but hopefully I can borrow one and try it out...
@roberturmosi-dirtbike-atv6 ай бұрын
We both prefer the same thing out of the YZ. I had this kit on the shelf for 2 months because of a hesitation for the same reason what you have. I think what you can gain is more than what you loose
@jne2326 ай бұрын
She absolutley screams! How is the power compared to your 300 XCW?
@roberturmosi-dirtbike-atv6 ай бұрын
I spend a lot of money on the 300 to run like the YZ I even have the new ERM software uploaded on to it but I like think She still can beat the 300. She es a natural Beas!
@al-ew3mj6 ай бұрын
@@roberturmosi-dirtbike-atv did you not put the tsp head on 300
@roberturmosi-dirtbike-atv6 ай бұрын
@@al-ew3mj I did put it on but that bike is still to linear which is good on the mountains. I like a bit more "hitting" power like the YZ have
@Floridawoodsbanshee6 ай бұрын
That heavier fly wheel is for tight, technical trail systems. Maybe trail systems with hard pack dirt and rocky conditions or clay conditions like Georgia.
@jonsainsbury87265 ай бұрын
Setup -GYTR flywheel -Apex Head -Apex jetting chart -14/51 gearing -Adjustable your suspension /sag
@ronlawson58196 ай бұрын
Shouldn’t that weighted fly come stock on the X
@roberturmosi-dirtbike-atv6 ай бұрын
I think it's should have come with the X especially they have the parts on the shelf
@benjaminsanabria52126 ай бұрын
How do you like that bike vs the ktm
@roberturmosi-dirtbike-atv6 ай бұрын
I'm luck enough to have both and I can't put one above the other. Both of them are excellent bike with the mods I have done to them. Which one you like better ?