H&R Coilovers and New Wheels TRANSFORM my 250k Mile Allroad!

Today we install H&R Street Performance Coilovers (P/N 29092-2) on my 2013 Audi Allroad. Along with some Niche Essen in 20x10.5 et27 wrapped in Falken Eurowinter (review coming) in 255/35 20, they bring a completely new life to my 2013 Audi Allroad.
Follow me on Instagram: @IgnitionTubeYT
IgnitionTube on FB
/ ignitiontube
You can subscribe to IgnitionTube for videos on my B5 S4, my Audi Allroad, my Audi SQ5, my old high mileage E46 M3, my old high mileage B7 RS4, my old dual pulley Audi SQ5, my old modified Audi S6, modified Audi S4, VW GTI, a variety of my friends cars, and much more including event coverage, vlogs, drag racing, and any other fun things I decide to film.
My 2013 Audi Allroad
Color matched flares by @mikesautobody_north
Suspension:
H&R Street Performance Coilovers
Wheels & Tires:
Niche Essen - 20x10.5 et27
Falken EuroWinter - 255/35 R20

[@SLW_GT2]

Really enjoying the videos on the allroad! Really enjoy all the videos, but seeing the wagon is super cool. Excited for this build

[@Gabriel_Starr]

I got the same h&R street performance coilovers on my b7 a4 avant. Ride quality is unreal, just so proper not to stiff or soft and not bouncy.

[@eurojeff]

loveeeee the wagon content. I can't wait to watch this entire thing transform.

[@IgnitionTube]

Me too!!! Very excited!!!

[@MikeAvilaMD]

So glad you’re keeping the wagons alive and on the road. I want one so bad. And I have a 2016 S4.

[@sebastianlorenzo4935]

hyper silver would have looked soooo much nicer. black wheels are like 5yrs ago. Car looks good FTW

[@s5supercharged]

Stop being mean to yourself. Your not washed up KZbinr. You help insire alot of people. Keep going

[@IgnitionTube]

needed to hear this - thank you

[@cbrnrdo]

Black wheels are never the move, I hope you powder coat them silver at some point! If you're rubbing, its pretty easy to resolve without raising it. Front - remove the fender liner bolt at the top of the inner fender, and possibly hand bend the inner metal fender up. You can also trim the inner plastic lip of the flare, easy with a dremel. Rear - same flare trim, there's no inner metal fender. You might get a soft pedal with the BBK, so start looking into an RS5 booster/master cylinder. Its larger, and aluminum.

[@IgnitionTube]

Thank you sir 🤝🏻🤝🏻 agreed on silver, I’ll photoshop some renders! Fender screw is removed in front, looking like I may juuuuust slightly have to trim the rears. If I go to a 275/30 in the spring we’ll have to revisit. Appreciate your guidance as always!!

[@cbrnrdo]

@@IgnitionTube the plastic will self-clearance eventually 🤣

[@keithwilson1061]

I think that the black looks great against the white. I’m all about the contrast.

[@Koachise]

I am loving the build. Got me mad inspired. I personally hate black wheels, but that's because I am a photographer and it's rare when they look good on camera like you said.

[@IgnitionTube]

It’s a struggle!!! Even filming the glamor shots in this video, either the car is overexposed or the wheels are under haha

[@StormCS]

Been subbed since the S4 days, I've also owned a b8.5 allroad for a few years now. Stoked to follow your new build!

[@jm7_redcustom486]

Meen, i was looking for someone do some work on allroad. I got also 2013 allroad and your videos are like manual guide for me ! Keep on doing fantastic content like that ☝️☝️☝️👌

[@cossiecola]

Awesome! Looking good DJ launch control

[@corymichalsen4574]

Pumped for this build! Been watching since the mk5 days, your white s4 was my favorite so I'm stoked to see what you do with this

[@IgnitionTube]

My S4 was silver 😭😭 don’t white me!!! lolol

[@corymichalsen4574]

@IgnitionTube didn't you wrap it a off white?

[@IgnitionTube]

Haha it was grey but everyone called it white to bother me

[@RosSauce85]

Good stuff! I recently ordered some H&R coils for my Mercedes E550 coupe based on your review. Can’t wait to get them!

[@IgnitionTube]

You’ll love them!!

[@sreed_]

New ignition tube video lets GOOOOOO

[@MrSneakA]

Much excite! That foreshadowing!

[@robbym3542]

Some euro headlights or built headlights would be killer on the white. I just did some clear reflectors and clear lens projectors and it looks so much cleaner. Better headlight performance too.

[@IgnitionTube]

I’ll be doing the clear corners!! Just waiting for the parts to come back in stock online.

[@robbym3542]

@@IgnitionTubeif you’re opening up the headlights to do them I would suggest doing a clear lens swap and lens spacers to get that sharp blue cut off line. I think there’s some audizine forums about it.

[@mrhasfun]

I've recently subscribed and really enjoying the videos. You've got a great energy, dude. But now I'm figuring out how to build a car like this, hahaha.

[@JorgeSantos-ji7sh]

Nice job on you ride.Looks great.

[@IgnitionTube]

Glad you like it!

[@georgereyes8320]

Looking good! I’ve been wanting a winter beater/daily driver and the idea of getting an all road and almost doing a Dakar version is very intriguing. I’m curious as to why you opted for an allroad instead of an a4 Avant as your platform?

[@sirgilbert605]

woah...looks awesome bro!!

[@only88mph]

Sweet, gonna be a wicked build! I have a b8.5 Q5 I would love to lower it!

[@thecatch83]

I have kept on my gray oem allroad flares, running matte gunmetal rotor wheels (not black), and not only run my crossbars, i added a thule motion xt alpine cargo box. I feel like this guy was in a basement with encino man 15 years ago, and just woke up with his choice in mods.

[@justinitdoesntmatter7515]

I was just looking at those rims for my Audi s4, they look good may have to pull the trigger soon. I was thinking gun metal though. My s4 is white as well.

[@MstefVR]

The Allroad raised roof rails drive me crazy. I prefer the slim B8 avant ones instead. Such a cleaner look. HMU I have a set and I’m in MA if you’re interested. Love the avant content!

[@IgnitionTube]

I have been on the hunt for a set of those - let’s talk! Shoot me a DM on Instagram or an email - IgnitionTube @ gmail

[@paulmount3893]

Fitment on point

[@juliank911]

Subscribed for Allroad content! I see from your error codes you have cold start low fuel pressure at the rail. Mine has this too, pops and farts (bad misfire) on cold start up cycle. Have you fixed this? I have been trying various things, without success. Walnut blasted valves (they weren't bad anyway), checked and cleaned plugs, replaced 5th injector, replaced fuel quality sensor, checked hpfp cam follower, swapped low pressure fuel pump assembly, swapped field pump module. Fitted new fuel pressure sensor which seemingly "fixed" the issue, I test drove the car for 20 or so minutes, drove great, romped on it a bit. Next day my wife drove it and after about 10 miles it started to drive poorly again (low power and struggles to even get to 60), cold start is popping and farting again. Something I notice is that the cold start sequence doesn't move the intake flap and even if I manually adjust the flap during cold start as it's misfiring, it doesn't make a difference. We don't have E85 here in Kansas City near me so I don't actually think the 5th injector is in use at the moment.

[@nolanranker9506]

I personally dont mind the black wheels. It seems like you kind of have your mind made up on going silver which I think would also look good, I think if you were to go silver doing aluminum S4 mirror caps would look nice, but on the off chance you kept black I think switching to a black RS mesh grill would look really good, then you wouldn’t have the chrome allroad grill clashing with the black wheels, either way I’m excited to see the final product.

[@jamesk3565]

Looks nice. Looking forward for the brakes😊

[@IgnitionTube]

You and me both!

[@joaosalbany6604]

you are needing a front lip....great content and enjoying the build.

[@MegaRetr]

Awesome video)

[@gabuzablezip8850]

Need your proffesional advice!! Have some wheels 255/45R20 from a q5. What do you think? Will be fine on my allroad B8? or ar too big?? Pls help me with an advice. Thx

[@dariusbaraiac]

been wanting to do a s4 swap allroad for a few years now. literally my dream build. excited to see how it turns out! 😝

[@MidwestMotor]

Hey brother! I've been traveling a lot and trying to catch up on videos and your channel! Too funny at 7:00 - I was just going to say I thought you hated black! I love them especially on a silver or white vehicle! Nice setup EXCEPT that stretch is horrible!! 🏁🏁🏁🏁🏁🏁

[@brandonbergeron4668]

This is sick

[@Kiss__Kiss]

Yep, Down that rabbit hole.. She's starting to look rather Lovely, If I'm being honest. 👍

[@THEDOPEYDAISY]

Hyper Silver is the way to go.

[@Da__goat]

Once again asking for the B8 avant with the v8 out of the Rs5

[@besnikseferi1809]

I don’t think you should do a 3.0t swap I think the 4.0tt from s6/7 would be a better match and since those also can bolt a manual transmission it’s something to consider and who doesn’t like a v8 station wagon..? It would be one of a kind build

[@IgnitionTube]

This is my first swap, sticking to something more “simple”!

[@CrispyImmy]

never disconnect the pinch bolt haha, you already know

Well, I did this on my C6,5 A6 last year. Went with ST suspension. I love it. BUT the way that you "installed" is kinda wrong. Its like "i only want install coilovers and nothing else" so much you can do to improve ride and also. I wanted to do geometry afterwards. They loved me there for replacing bolts in the rear! ones that you adjust camber with. Friend of mine installed everything your way. And they kicked him from one shop because bolts seized and stuff. Dont get me wrong. Its easy way to install them this way. BUT in the long run you will replace other stuff and you have to unbolt everything again. I think you said that it will be 3.0 swap? So why not just do it one time properly all at same time. Maybe its just me. Replace everything at same time. AND yes. My C6 is 370kms into life. And its 2010 model. But its 3.0 TDI. Love you channel btw. Its just constructive criticism? :D I cant help myself. Sorry

[@IgnitionTube]

The entire rear subframe of this car will be replaced when I do the 3.0T swap, but I won’t be tackling that until spring and wanted to lower the car. Technically it’s not “right”, but you also don’t HAVE to do it the way you did it!

Yea ofc, i understand now. Well, my bolts were pretty much rusted away. And even my mechanic/friend said, no way he is doing that without doing everything at all and im glad we did it that way. I can imagine pain of doing in on car. Even rears. As shown in video. @@IgnitionTube

[@pf6797]

God I love New Wheel Day.

[@albertolopez-pu4xw]

coilovers h&r with springs oem?

[@IgnitionTube]

Nope, if you watched the video they supply new springs as well!

[@honorhurricane5180]

I’m just wondering how this guy has so much money 🤣 Silver wheels would be the move and imo the grill needs to do just don’t care for the allroad grill

[@dubgli]

Nice