Replacing the ENTIRE TURBO SYSTEM on My Cheap Volvo V70R

In this video I'm replacing the turbocharger, intercooler, intake and whole lot more on my cheap Volvo V70R.
Follow my car instagram: / wheelemverb
///////////////////
Business inquiries: [e-mail]

[@fgardner]

This dude is chill as fuck

[@crimsonred9207]

You should see his film photography it’s amazing!

[@bernie5970]

A pure genius IMO

[@johanoseroff9081]

Found your channel by accident browsing repair vids for my own Volvo :) So happy to see there are Volvo addicts avross the pond. Greetings from Sweden !

[@LOLHICRONO]

miss my v40 2.0se, was kinda shit but also my first car

[@bren.nan_]

i wanna visit sweden one day, any spots you’d suggest to visit?

[@no_mechanic]

@@bren.nan_ The Volvo museum in Gothenburg if you like Volvo's :) Would also recomend the Saab museum in Trollhettan. The Saab museum is a small museum, but still a very nice experience :) 'm from Norway and was there summer 2023 with wife and kids, they all liked it too :)

[@rikardo1581]

I am from sweden too. You should of course visit stockholm. And visby is one of my favorites@@bren.nan_

[@ForeignRuntzzz]

nah same here bro i love this mans yt channel especially since its the p2 same as my s60 just wish i had the r but the 2.5t is fun af

[@kocklerluke]

Seriously one of the best automotive channels out there right now. This is what the new wave of automotive KZbin needs to be. I've been watching the whole series and can't wait to keep seeing the progression. Keep killing it Willem!

[@markhensens5989]

Amen!

[@thegirthquake8574]

It's gonna sound somewhat stupid but I think the best part of this video is the fact you took the time to clean your parts when you had them apart. That shows a level of deep care that most people don't think about.

[@bernie5970]

Agreed ... perfection!

[@Michael-lg4wz]

If you like clean builds check out Devin Niemala stripping an evo to bits

[@alfred-um9nr]

you know it's a good day when WheelemVerb posts

[@bernie5970]

Yep

[@paulnielsen8528]

17:44 = reminded me of the zip tie trick. Put a zip tie through the gasket and one of the holes. That holds it in place while you get the other bolt started loosely. Then cut the zip tie and pull it out. Install the other bolt and you're done. No goop to cause you grief later.

[@PhilipDaeHan]

As a guy who's worked on Toyota's, Honda's, and Subaru's, it's really fascinating watching your videos on this project and seeing what car design is like on the other side of the pond. But at the end of the day, hands always have to get dirty.

[@lowridercoloringbook]

Great work! I am glad that there are guys like you out there saving V70R’s. Greetings from another V70R-owner from Sweden.🇸🇪😇👍

[@bobsykes]

For someone who hasn't done any serious parts replacement on a car since a '66 Mustang, parts of this were terrifying to watch. You do beautiful work. Everything looks so good when you're done. Really glad you're spending your money on these Volvo parts instead of, say, a new Hasselblad... ✌

[@wheelemverb]

Hahah thanks Bob! Much appreciated

[@heliumigge8523]

greetings from sweden, i think that you are the best volvo youtuber out there detailed instructions and you do the things any dedicated volvo owner would want to do to their volvo. thank you a volvo s60 freak from sweden

[@jurriaandejongh8677]

Awesome work dude. I actually like that it's not all flashy but also some more sensible work. And whatever you're doing with this format, keep doing it, you've got 100% my retention, just sat and watched this whole thing non stop. That's real rare nowadays for me. :)

[@bernie5970]

I think the relaxing elevator music actually makes these jobs look easy.

[@Levi-gj2ph]

I like the V70R original manifold's rugged sound but the deep notes of the Japanifold are great too. It's a hard choice between either, but I like the off the line sound of the R much more.

[@wheelemverb]

Both are great! I think I’d have to pick japanifold and I’m not just saying that because I just spent a week putting one on 😅

[@Levi-gj2ph]

@@wheelemverb I definitely think the long term sound of driving the Japanifold is much enjoyable, I'll have to agree!

[@justind1045]

The japanifold (as well as the 850/x70s) are designed with runners with lengths that flow much more efficiently according to the firing order. This is why the R manifold sounds raspy, and the Japanafold, etc…sound like baby V10s. The way Porsche meant them to sound.

[@pistta]

R mani flows better. just look at it. that square shaped "japanifold" is obviously a loss in terms of power and head flow. not sure y anyone would want to make it more difficult for that ehaust gas to leave that cylinderhead. cant beat a tubular equal length setup tho

[@justkiddin1980]

Recent subscriber from across the pond…I’m sorry to say i don’t hear a difference between the two on my tv…But the experience you gain with projects like these shouldn’t be understated..I like the content and keep up the good work grtz from the Netherlands 🇳🇱

[@BitterSeth]

As a fellow V70R owner, I cannot tell you how much I appreciate these videos. You even inspired me to track down some of those two-tone Carhartt WIP pants!

[@davidbowman4015]

It is great to see young people who are not afraid to get their hands dirty working on a car. Your fearless approach to the challenges you faced are heartwarming. Knowing that a single change in the system can lead to many more downline and going forth and tackling it all was great to see. Thanks for the great video and lessons on HotRod updates on the R.

[@BWTECH0521]

so much dedication dude, very impressed. Thank you for taking us along with your journey!

[@mikeblair6648]

One of the best automotive channels on KZbin. Love the chill vibe!

[@gt4rs429]

“Especially if there’s a laptop in the passenger seat… running vida” 5:30 😂 killed me. Love the content bro super stoked for you

[@tomppeli.]

If I remember correctly, your channel has tripled in size since you started this series a year ago I can't believe it's already an entire _year_ ago...

[@DeoAbarquez]

Great job Willem! Did a similar job to my 05 Forester XT. Turbo, downpipe, up pipe, intercooler, 3port BCS and intake. It totally transformed the car and it makes some unreal turbo sounds. I can definitely empathise with feeling like it would've never been put together and the accomplishment of completing it all was equally as great as hearing the turbo spool and whoosh the first time! Well done once again!

[@czLochy]

Man I have been loving your videos so much! Theyre so well made, genuinely on par / better than a lot of the more popular channels. Ive seen every video of this series and its been a blast! Sending my props to you all the way over from Czechia, keep it up!

[@joneldridge5513]

We should call you ‘Tenacious Will’, with all this brilliant work you are carrying out on the R! Have had mine for 2 weeks now and absolutely love it!💙

[@thunfischkuh]

Thank you very much for your content, I love the pleasant atmosphere you convey in your videos. It's really rare nowadays without a lot of talking and loud music. Greetings from Germany :)

[@K-SHABAB]

Before clicking on this video i didn't expect it to be this high-quality and depth fun relaxing to watch great jod well done and good luck ❤️❤️

[@Zolaturbulencija]

I love understated cars which are mechanically in top condition. Nice job, looking forward to see upcoming videos

[@wheelemverb]

Same

[@kneb2001]

First time watching your channel not on my phone and just wanted to say I really appreciate all the 4K clarity! I can really see what you're working on and kudos for the full 4K workflow.

[@frankiekuzmich441]

Huge fan of your channel. The fact you don't just throw new parts on and go is awesome and what these cars deserve. Lifelong Volvo fan and love seeing this icon getting proper love ❤. Also big difference in sound with japanifold. Sounds like it should. Also airflow is designed and engineered better than the standard R manifold.

[@gusland1235]

Awesome job man, you can really tell how after everything is finally back together with all that hard work, on his first pull, listening if everything is fine followed by that smirk and finally relief settles in. Nothing beats this type of feeling.

[@Midnight_Mechanic]

The videography, editing, projects, & music are all top-notch. Loving this channel man, you're doing such a good job

[@camperhonsa8633]

I found this channel on my for you page and was instantly hooked on this series! Great car and even better content👌. Keep it up🔥

[@croooaaalagraula]

Doing the mechanical work is one thing that he does right... filming the whole process and editing the video is another great part. Congrats man ! And without loudly music

[@vapor64x]

Great camera angles of specific bolts and socket trains, nice job cleaning parts changing orings gaskets and doing everything right!

[@jaredwalker8065]

Love your videos and how you present your authentic self! Keep it up!

[@jonathangiles4854]

This is like the M395 Restoration channel, but for Volvos 👍

[@iea96]

Exactly what I was going to comment!

[@yeetgor7340]

these videos make my finals month much more bearable, amazing material cheers

[@nate_meador89]

Another great video. I work on these cars as a full time job and still love watching your videos

[@OscarMaGurk]

Dam dude way to go. It is coming along. Impressed with your work. Love to see this come out. I have always loved Paul Newman's Volvo wagon I believe a Ford 5.0 kick ass. Best of luck on this project

[@augustgast]

I dont own a Volvo. I dont plan to buy one, but jeez this channel is just pure gold! Stumbled over this channel couple months ago, and it’s just too good. Some of the best car content on this platform.

[@lens3641]

Just the video i've been waiting for. Left last week on a cliffhanger!

[@wheelemverb]

I was left on a cliffhanger myself!! Not what I was expecting to happen 😂

[@PaladinJenkis]

I am wrenching on a Golf mk4 1.9 TDI and found this channel by accident when I was looking for something, so glad I've found it! I really enjoy watching your journey with this beautiful Volvo. I am thinking about starting another project and can't yet decide what car to pick.

[@alouisschafer7212]

bro these old Volvos are so underrated I appreciate every one that is kept in good shape up and running and not driven into the ground and disposed. There is a tendency for Volvos to end up like that because with the bare minimum of maintenace they last so long. These Videos hella motivate me to keep my 2007 Diesel model in top notch. A Diesel Volvo is a unicorn in itself 😅 and I dont see the point of not taking care of your stuff. Also the D5244T engine that was Volvos mainline Diesel for many years is legendary for standing out in terms of reliabilty and longevity along most european diesels. So I know 250k kilometers on the odo now is nothing. I want to clean out the EGR system and change the automatic transmission fluid this spring along a standard service (oil, filters etc). And look into a set of Bilstein B6 OE replacement struts to improve the ride.

[@Nukalyptus]

I can only imagine experiencing that smile that got on your face when you hit the gas. After all that work… what an amazing machine you’re building. Keep up the good work!

[@ethans4387]

This series is amazing, good work Mr verb

[@jamesmedina2062]

glad you don't shy from work. I often overthink things but you don't.

[@justind1045]

That was super satisfying! Love the vids. Any interest in doing any P80 projects…like a manual 03-04 C70 convertible perhaps? In any case, keep ‘em coming!!😊

[@crimsonred9207]

Sounds like the noise level but the Japanese manifold sounds deeper! The burbles and pops are nice and idk if it’s just me but the the turbo spools are more prominent as well! Overall great amount of work out into this car! The correct way as well. Love the videos! Can’t wait to see where you take it :)

[@Haze_E1]

yet another banger of an ep my dude keep pumping it out, I kinda like the old R manifold but it does sound like it has a blocked nose haha

[@T5_T-Rell]

With time we all learn and get better so just a tip: next time you want to remove your exhaust manifold do not buy the 5 individual gaskets recommended for these cars it makes your life way harder for no reason. Buy the single piece p1 Volvo 5 cylinder gasket. The engines have the same exhaust ports and the only thing you have to do is cut a small corner of the gasket off so it clears either a bolt or the water pipe or something on the back of the engine…I can’t remember it’s been forever since I swapped my manifold when I was doing my big turbo setup on my last s60 T5. But people have made videos and write ups about where you have to trim

[@gabrieltan3515]

Finally, welcome back. I’ve been waiting for a long time 🎉

[@joshohanlon1085]

Bro dead ass I've been waiting for this episode all week !

[@Teun]

favorite series on YT at the moment!

[@electricburning]

I've been enjoying watching your photography channel and today somehow stumbled across this channel. What a supprise.. Happy to find your channel!

[@sandzhs]

I love the work you put into this car. These Volvos deserve it. Keep it going!

[@Skeeter69420]

I owned one for many years. 04 V70R Black Sapphire. Atacama interior with 3 pedal six speed. Love to follow what you’ve done. I’m a tech and it’s like like being at work for these cars. Unfortunately 4 years ago a deer totaled my baby!!!

[@Jlockjammers217]

I’ll Be honest I found your channel today and have been watching all day just looking for other car content creators and I don’t think anything your doing is boring because it’s educational and fun to watch can’t wait for the future of this car hopefully in a year you’ll be pushing like 600hp lol

[@Andi.Cristian]

You've got my subscription/like, and while there isn't much to reharden the stuff that you do that I can apply to my Volvo ; because I live in Europe and there are far more diesel D5 than R models, the quality of the videos and the fact that you're working alone will keep me interested in this series.

[@slimeplayz164]

Probably the best channel out there for volvo guys

[@ascona71turbo]

Wow 1500 dollar car 😱 It’s like 10 times higher here in Sweden 🙈 These R models are legendary here

[@juanzeller102]

Beautiful work!! It sounds much better I am a volvo lover. It is impressive what improvements you can do. Your Volvo will be much better than a new one. You seem to be very knowledgeable with Volvos. You make things look easy. Great job!!!

[@humppanen9130]

Happened to stumble upon this gem of a channel! Happy to see some love for Volvo's. Are you going to remap this? Any plans for older Volvo's? Subscribed and greetings from Finland!

[@sebastianwardenius8169]

I’m from Sweden and I approve this wroom wroom! Keep up the great work!

[@archy_stonem]

Awesome! If you want another cheap, but noticable upgrade - get iPD Subframe bushings inserts. Makes steering much better

[@wheelemverb]

I put those on my white v70 and didn't feel a thing except the pain of putting them in haha. Going for full Delrin replacements with this V70R next :)

[@virtualburton]

I love to see how happy and excited you are. Great work, thanks for posting.

[@Ricky-yx6zs]

I happened to find your channel researching Volvos and man I’m glad I did! Love your vibe and love the V70R!

[@bernie5970]

Excellent video, as always. Owned four V70s/ 850s. Last one is a 2002 / 2.4T/ 260k miles. Best car I ever owned. Close 2nd was a 97 / 850 (manual 5 speed 😊), which I sold for $1200 with 350k miles. Unfortunately, they don't build them like they used to.

[@uwegrafer6456]

What a skilled mech and cameraman you are! Like your channel and wish I could do some work like that on my 2.5 V70! But its quite encouraging! Greets from Hamburg!

[@anthonypostivka]

Japanifold sounds a little more raw and aggressive for sure - personally I love both but prefer the japanifold. Even non-volvo car enthusiasts will definitely notice a moderate difference. Regardless of what mods you decide on next, I am already excited for them. Rebuilding a family relic of a V70 2.5t alongside your build!

[@Tommy-Tom-Tom]

Love your videos kid. Sick build, great camera work, great editing, chill music. Awesome job all around

[@belgianbushrc7934]

A fellow Belgian that knows you from the photography channel, and now discovers you also like working on cars! Great job, and a legendary car.

[@Jarot]

Love how most of your videos end with you giving us a comparison and shows you driving the car

[@wheelemverb]

Thanks! I enjoy seeing the car incrementally improve as well

[@nefmedina231]

Man I wish there was more Volvo content out there, specifically S60r stuff, but glad I found your channel. Keep doing your thing dude. 👌🏽

[@MercyOfDarkness]

I cant wait for the new video every time. I just don't want the video to end, I am always curious as to what the next one is going to be.

[@nerdsports]

Imagine my face as I scroll and scroll on KZbin and then run into this new video!! Love the work you keep putting into this car.

[@bwest6275]

Absolutely love the V70R. I almost bought one twice but just couldn’t get a good deal on them when new. This is such a cool project. Can’t wait to see how it continues to evolve 👍

[@bernie5970]

Posting as I watch this video. The smile on your face toward the end is precious. ❤❤❤❤

[@rickjoony5743]

Now this is some awsome content. Finnaly a youtube channel that is based on volvos.

[@Joel-um2oi]

I don’t even own a Volvo but I like them and this is top tier content keep it up my guy!

Dude, great videos, keep going i love them. I had P2 2.5 for 5 years and your car is DREAAAAM!

[@SanProsan1993]

Just finished binge watching every video on your channel last night. Loved every minute. Sold off my Volvos, but your videos helped me to scratch that itch to hear a proper T5 exhaust note. Nothing compares, except for maybe Volkswagen VR6 and W8 engines. And that's coming from a JDM fan who hates European cars... Your channel also reminded me why I shouldn't consider getting another Volvo 😅. As boring as my 2003 GS300 is, it at least doesn't drain my bank account nearly as quick as my 2.5T and 3.2 Volvos did...

[@PlanetTwilow]

You use a S40 single piece exhaust gasket, and studs for a bunch of the ex manifold bolts, bolts for others.

[@BurthaDungas]

I myself have a 2007 Volvo V70R with Orange Interior and original orange rims. I'm currently in the middle of the build and your channel is making a lot, much easier. My only problem is, that I'm located in Switzerland and tuning here is almost impossible. Greetings from Switzerland

[@NvmBobby]

Been following the build since you bought the v70r, loving the progress, been looking at getting a Volvo wagon myself (probably why I found your channel) and it definitely cool seeing the car and its journey :)

[@Boooost3d]

Found you by accident too and I'm not a huge Volvo fan but these are so well shit, I'm engaged. Subscribed

[@eduardopasini]

I found your channel by accident, I've always liked cars and I've always liked Volvos. I'm loving your videos, keep it up. Congratulations! Greetigs from Brazil!

[@ENCASE]

This is my new favorite channel. its a shame you guys never got the D5 to play with too

[@bren.nan_]

we should be able to import soon!

[@NordbyFPV]

Awesome build man! I'm super jelly 😅 Always loved the 5cyl Volvo engines. Your V70R already sounded super cool before, but that added crispy pop is just.. *chefs kiss* 👌😁 Cheers from Denmark!

[@Najenra]

Very nice video. Amazed about how clean the car is underneath. no rust. My volvo is a couple of years newer than this, buthas a lot of surfacerust underneath.

[@xantor_]

btw it is possible to get the turbo in with the angle gear in place- you just need a flex tool to screw the bolts in

[@Alcalfa]

Not sure what's normally done with intercoolers, but with full metal radiators it's normal to have rubber mounting. Alu stress cracks easily, just like a brass radiator.

[@TheMrsmits]

You're the only person on youtube where I manage to watch the entire video. Best (new) automotive channel on youtube. Don't stop!

[@quantumlab9130]

There's definitely a little difference, I don't know if it's as big as many people say but definitely there and I thinks it's better... can't wait for the manual swap ;) and a front bumper respray cause it deserves some love

[@dannyolivo]

Like everyone else here is doing, just wanted to also say that I really really enjoy this entire journey. Appreciate all your work brother!

[@thegoatrocket8082]

Great job 💪 I just want to add that when you fill new oil in the angel gear up to the level, it is important to then suck out a certain amount of oil. It says exactly how much in Vida. If you don't do that, there will be overpressure in the angel gear and then the remaining oil will be pushed out through the seals unfortunately

[@StaticVapour590]

Did you replace the angle gear collar sleeve and axle seal? When that sleeve is rusty enough it will grind the splines off and kinda pita to get off the angle gear when it's really rusty..

[@mijiz]

This thing must make some steam! Seeing that's it's boosted by a whole Honda 2.4L engine! 😮

[@silkpursuit]

v70R is the only wagon I could see myself switching to from my legacy. Keep's the ideal of a unique engine and has many more creature comforts, interior is a lot nicer too. You got that car for a steal and im super jealous. Awesome work btw ! :)

[@AZMTB]

Awesome work! Just keep an eye on coolant loss, usually a sign of the dreaded cracked cylinder wall issue these engines have.

[@Robert-y8l9r]

Dude, you have the patience of a saint. Love watching these vids. Top effort 😊

[@newengland9thgen372]

Amazing work, this has been a great series to keep up on. I hope that turbo was broken in a little before she started hitting full boost!

[@aphex14]

Awesome build! We have a '98 V70 T5 on stage II. Great sleeper wagon! You should bring yours to the Cars and Coffee Los Angeles (Griffith Park), occurs every last sunday of the month. We will be in our '85 Corolla this weekend.