Thank you for that video really helped me figure out what was going on…
@HacksbyDad3 ай бұрын
Glad it helped! 👍😎
@Philip-mq4wp5 ай бұрын
This is the best video I have ever watched and it's so clear every step is clearly explained in detail excellent job😅
@HacksbyDad5 ай бұрын
Thanks... much appreciated! It's comments like this that keep me pushing ahead. 😎
@justincarpenter61472 ай бұрын
After watching about 10 videos, you showed the best examples. People go straight to "how to replace a fill valve" without any troubleshooting. Thank you for this excellent content. Troubleshooting feels like 99% of the work when plumbing but only 1% of the plumbing content on KZbin.
@HacksbyDad2 ай бұрын
You’re welcome and thank you for the kind words! 👍😎
@rhoshikathomas92335 ай бұрын
Ive looked at about 4 different videos and i finally got it!!! Thank so much i just hope it continues to cooperate!
@HacksbyDad5 ай бұрын
Glad to hear it! 👍😎
@edgarhilton13629 күн бұрын
This is a great video straight to the point no fluff thanks for your help
@HacksbyDad29 күн бұрын
👍😎
@bobGmitter6 күн бұрын
Thank you just needed to turn the one adjustment screw counterclockwise and it stopped overfilling the overflow tube
@HacksbyDad6 күн бұрын
👍😎
@huylam967719 күн бұрын
Thank you. Your video is amazing.
@HacksbyDad19 күн бұрын
Thank you too! 👍😎
@gab312823 ай бұрын
Thank you! This is exactly the info I was looking for.
@HacksbyDad3 ай бұрын
You’re welcome! I’m glad that you found the video helpful. 👍😎
@JohnSmith-k1x2 ай бұрын
I have two types of toilets in my house one is a Briggs and the other is a Kohler (hope I spelled it right) , anyway my fill valve kept refilling only like a 1/2 inch every say 20min. and I did everything this video suggested ( well done Sir. ) anyway the problem turned out to be the large white nut for the seal from the tank to the toilet (it was lose) so took everything apart and tighten it problem solved, So this is just one more step if you become stumped. I hate Kohler toilets oh and those cone shaped fill cylinders on a kohler toilet I would get rid of them and only by fluid master units anyway project done all good thank you Hacks buy Dad great job
@HacksbyDad2 ай бұрын
Thanks for sharing! I'll add that to my troubleshooting list. 😎
@JohnSmith-k1x2 ай бұрын
@@HacksbyDad You are more than welcome and thank you for the great info, I subscribed and thumps up. Great channel
@HacksbyDad2 ай бұрын
@@JohnSmith-k1x 👍😎
@Echo_IslesКүн бұрын
Thanks!
@HacksbyDadКүн бұрын
You’re welcome and thank you! The support is much appreciated! 👍😎
@joannparker60798 күн бұрын
Thank you!
@HacksbyDad8 күн бұрын
👍😎
@gustavosh.51475 ай бұрын
Wonderful video. I got exactly the same flusher. Your steps are perfect. I replaced the flusher, because every time I flush , it takes for ever to fill and most of the water drops in the seat while filling the tank. I looked for videos and found yours. I’m going to check the valve exactly like you did, I hope it’ll solve the problem. Thank you 🙏
@HacksbyDad5 ай бұрын
You're welcome! I hope you fix all the problems and end up with a perfectly working toilet. 😎
@henryfrater33712 ай бұрын
This is great. Thank you sir. I am keen to start taking on some more responsability around the house and your channel looks like the perfect place to help!! Thank you 👏
@HacksbyDad2 ай бұрын
You’re welcome! I hope you find some of my videos helpful. 👍😎
@kurtmershon63704 ай бұрын
thank you. Somehow the cheapest replacement parts kit I could find developed a blister on my flapper valve seal. I punctured the blister, and that was it. I don't think flapper valve seal blister was covered in the video, but the video gave me enough to walk through it to the finish. Thanks!
@HacksbyDad4 ай бұрын
A blister? I haven’t heard that before. 👍😎
@SlickClicks5 ай бұрын
I seem to have a different type of fill valve than what you show here without the adjustment screw, etc. Any suggestions on where to find information on that. Also my tank seems to leak both into the toilet and outside on to the floor. But the bottom surface underneath the fill valve area seems dry
@HacksbyDad5 ай бұрын
Is it a Fillmaster fill valve? The leak outside could be from the tank to bowl connection. See if you can see or feel water dripping or running down the backside of the bowl.
@cesargamarro34685 ай бұрын
Very good info, watched just the first half of the video and I learned what I needed to learn, thanks a lot!
@HacksbyDad5 ай бұрын
Hey… go back and watch the 2nd half! Ha! Just kidding! 😎
@LKGB-f5lАй бұрын
Thank you so much this is exactly the solution to the problem I had in my toilet!
@HacksbyDadАй бұрын
👍😎
@ubiskenasduseikenas4 ай бұрын
This video does not help anymore when every toilet has different system now :(
@HacksbyDad4 ай бұрын
👍😎
@ethanchen88458 ай бұрын
How can I fix my toilet when the fill valve goes down but the toilet doesn't fill back up with water?
@llk37638 ай бұрын
mine did that - long delay before refill. I turned the fill valve float screw counter clockwise all the way. Now works as should. Keep the water level at least 1/2" below top of overflow pipe.
@LightSpeedDevil7 ай бұрын
Can someone explain how the internal mechanism for the fill valve works?
@HacksbyDad7 ай бұрын
I sure can… How Fluidmaster 400 Series Fill Valves Work kzbin.info/www/bejne/qqjcn3turbuXr5o 😎
@Johnett-ij1tv5 ай бұрын
How do you slowly flush the valve the part with the cup over it
@HacksbyDad5 ай бұрын
Slowly open the supply valve. 😎
@raymondrojas16265 ай бұрын
Thanks for your detailed video! Got the job done.
@HacksbyDad5 ай бұрын
You’re welcome! Glad you found the video helpful. 😎
@margaretdong56642 ай бұрын
Easy to follow, thank you for such a great video!
@HacksbyDad2 ай бұрын
👍😎
@BlueDoveSong21 күн бұрын
Very helpful-thank you!
@HacksbyDad21 күн бұрын
👍😎
@wallyj20004 ай бұрын
Thanks for sharing. What do the number dials on the flapper do and what do they mean? Thanks.
@HacksbyDad4 ай бұрын
Here's the secret to the adjustable flapper... kzbin.info/www/bejne/iqSam6uurJ16q6M 😎
@wallyj20004 ай бұрын
@@HacksbyDad OK, thanks so much for your quick reply.
@nmbssjmnf3698 ай бұрын
Very informative and easy to understand. Thank you so much!
@HacksbyDad8 ай бұрын
👍😎
@JSzezar5 ай бұрын
Just what I needed. Thanks for the help buddy ✌️
@HacksbyDad5 ай бұрын
You’re welcome! 😎
@Johnett-ij1tv5 ай бұрын
Thank you it was the seal
@HacksbyDad5 ай бұрын
👍😎
@markco1604Ай бұрын
The Exact solution!
@HacksbyDadАй бұрын
👍😎
@nusyil2 ай бұрын
Thanks a lot!!
@HacksbyDad2 ай бұрын
👍😎
@LKGB-f5lАй бұрын
Thanks!
@HacksbyDadАй бұрын
Thank you for the support! It is greatly appreciated! 😎