Haier 55" Smart LED TV. Not turning on

[@fernandomartins1662]

Thank you for your altruism and kindness to teach and share your knowledge..kind regards from Portugal.

[@tevzTVTevatronics]

You are very welcome

[@melcorramos5600]

You're one of the few that I've watched who don't used 4 wires. It seems like you know your "stuff" very well. I subscribe here on your vlog hoping to know more about e-repair of LED's... Thanks for being kind on sharing your knowledge to us!!!👏👏👏

[@tonythong]

Thanks for sharing Mr.Teve. Very good & skillful trouble-shooting technique.

[@tevzTVTevatronics]

You are very welcome

[@tonythong]

@@tevzTVTevatronics Mr.Tevz,may I know u live in which country.I live in Malaysia.

[@tevzTVTevatronics]

@@tonythong I'm a Pilipino.

[@tevzTVTevatronics]

I live here in Philippines

[@ros-spur98]

Great tutorials, learnt a lot from this channel keep it up. Much appreciated from us novices.

[@tevzTVTevatronics]

Great to hear!

[@sarockpashotan]

Hi my friend .mr revs. I am in love with you job style. Your voice is soft and clear and the way you explain the fairies of led TVs. I am interested in your opening of short complete word or its meaning I did not know what does the 3 letters of pfcs and I know that and help me to understand how tv or its panel works and more and more about the difference of made leds from different kind of companies. Best wishes for you. From iran.

[@tevzTVTevatronics]

Thank you very much

[@sunsys0]

🤣 That voice that like soooooooooo much is windows narrator voice, that is not his voice, he probably cannot speak English IDK 🤣

[@MrMonerqui]

Excellent way to repair, I like how it does it, especially using available resources. You definitely know very well what you are doing. Thanks for sharing your knowledge.👌🙏👍👏

[@tevzTVTevatronics]

Thank you very much!

[@irfanshafiqueelctronics5257]

techter exelint information video 110% real work great

[@tevzTVTevatronics]

Thanks

[@boycheerup721]

Master meron na pong gumaya sa voice over na blogger pero idol ko Rin gaya nyo Po Ang galing kasi

[@tevzTVTevatronics]

sinong bloger yun?

[@boycheerup721]

Joe tech ph master

[@boycheerup721]

Master meron kabang board ng devant 43LTV900 smart master?

[@tevzTVTevatronics]

@@boycheerup721 Sorry wala.

[@tevzTVTevatronics]

@@boycheerup721 Pag English kasi mas marami manonood na iabng lahi, at mas malaki rin ang revenue.

[@ogietechvlog3912]

wow so great repair and tutorial video nice 😊

[@bhullanashley9869]

Hi friend, this is too easy repairs, but the ic of the primary side is always bad when there no output on the secondary side.. So we need to put a module when this happens.. But ur videos r very very interesting thxs soooooooo much..

[@harrisdelapena6443]

Naka pag subscribe na Po Ako sir I enjoy watching your channel And I did not skip the adds kahit kunting makatulong Ako sa vlog mo...salamat sir

[@tevzTVTevatronics]

Salamat din And your welcome

[@jerrythabo9045]

Keep up the good job again thanx for sharing your knowledge u a blessed

[@bahramgouranni9131]

Very beautiful video 👍💙💙

[@tevzTVTevatronics]

Many thanks

[@davidsonkofi858]

Good electronic technician class lecturer

[@tevzTVTevatronics]

Many many thanks

[@TheJavaSync]

Axtually, I wanna know how LLC works 😀 But, I loved your vids also - thanlks for sharing

[@jalal76]

good job.......thanks number of replacement mosfet 13N.....

[@tevzTVTevatronics]

13NM60N

[@ravikm4473]

Nice.👌mv electronics... India. Tamilnadu...

[@mehmudalisk3903]

I am your big fan, sir please explain some circuit diagram, next time please, From India

[@tevzTVTevatronics]

Ok next time

[@mehmudalisk3903]

@@tevzTVTevatronics thank you so much

[@gyandeep9573]

Good video sir

[@AbulHossain-gc8jf]

Nice work

[@screen-protector]

As always, thank you for your work and video! :)

[@tevzTVTevatronics]

Thanks again!

[@georgeluceriano3216]

Watching master

[@MrAmrhamza]

Good work bro 🙂 .

[@tevzTVTevatronics]

Thanks ✌️

[@dieberztvmix]

Thank you for sharing this lodz

[@tevzTVTevatronics]

My pleasure

[@gabrielcuevas5837]

ok, veamos cómo se hace, saludos amigo.

[@satishkumar-gg5fm]

Nice work brother 🙂🙂

[@tevzTVTevatronics]

Thank you so much 😀

[@prabhukarthick439]

Super sir

[@kaviya9787]

Side Conner add on Your Multimeter Display 😉

[@Fardeenfarwest]

❤️🙏🙏 Good work as usual. Thanks ❤️

[@tevzTVTevatronics]

Thanks again!

[@Fardeenfarwest]

@@tevzTVTevatronics you're welcome 😊

[@prabhuprabhu4274]

Niec

[@zariyali]

👍👍👍

[@electrolatif]

Amazing jobs🥰

[@tevzTVTevatronics]

Thank you! 🤗

[@sikwenzesisonke7276]

Hello Master Could you please make a video of a cracked lcd screen, changing it or replacing it. Thanks

[@venkatachary3530]

Thanks sir

[@payusavisit3482]

Hello Tevz please what is the value of the resistor being used as fused in order not to experience more damage when testing.

[@tevzTVTevatronics]

220 ohms 20 watts.

[@payusavisit3482]

@@tevzTVTevatronics Thank you always watching you from France please can i have your private contact

[@tevzTVTevatronics]

@@payusavisit3482 here is my FB page facebook.com/profile.php?id=100057149602411

[@franciscofurlan4001]

Have You try to use an strw6053 also in PFC?

[@tevzTVTevatronics]

Not capable

[@rochelleilao2892]

What device you connect to the fuse that may not cause of blown when you test the new components you replace? Can you upload that device or can you do vlog of that?

[@tevzTVTevatronics]

Its a resistor. 220 ohms 20 watts

[@addijahchiduku4780]

Best tevs

[@brianjames6890]

Hi I think your uploads are great and most informative. Please can you advise I have a Sony 55XG8796 UKA TV that has no standby light or backlights and doesn't come on, Any ideas where I should begin to look please? Regards, Brian

[@tevzTVTevatronics]

Check first the standby power.

[@Swenser]

Could you do a vid on pf correction . And examples.

[@tevzTVTevatronics]

Yes soon.

[@prabhukarthick439]

❤❤❤❤❤

[@enriquea.pereiram.6139]

Please Tevz, what is the trasnsitor's numbers. Thank you.

[@briliandt]

Отличная работа! Скажите, это у вас резистор большой? Сколько Ом? Сколько ватт? Мы обычно лампу накаливания припаиваем на 60 ватт. Лайк.

[@tevzTVTevatronics]

Its my way. 220 ohms 20 watts.

[@briliandt]

@@tevzTVTevatronics спасибо!!! Заказал себе такой же. С лампой не удобно, уже две разбил :-)

[@preston963]

In some TV's with a standard SMPS I just disable the PFC crap, I keep those PCB mount fuses in stock. I'm a TV/Electronics/Computer tech 40yrs in OZ, it appears you know your stuff.

[@erkanmaller9695]

👍

[@ManilynTinguha]

What is your TV model ser

[@gwolf8807]

Sorry, may I ask what stands for LLC? Thanks!

[@tevzTVTevatronics]

www.monolithicpower.com/understanding-llc-operation-part-i-power-switches-and-resonant-tank#:~:text=LLC%20resonant%20converters%20are%20ideal,rectifier%20(see%20Figure%201).

[@gwolf8807]

@@tevzTVTevatronics Thanks!

[@venkatachary3530]

Hello sir.pls ur load resister wich ohms and watts

[@tevzTVTevatronics]

220 ohms 20 watts.

[@josepinillosv.1886]

Hola maestro , no entiendo el idioma pero entiendo el procedimiento, solo me gustaría que nos mostrará la placa del TV para saber de cuál estamos viendo yo no soy un experto gracias por gran labor.

[@tevzTVTevatronics]

I cant understand sorry.

[@fddizon1]

Jose, are you asking about the board code of the PSU?

[@asimhassan6672]

I just don't understand the elements you put to replace the fuse when u make the test can you explain that for me

[@tevzTVTevatronics]

Its a resistor 22o ohms 20 watts.

[@ManilynTinguha]

Mayroon poh aq Ka kapareho board ser pero iba model Ito poh and original 50k66ug tapes pinalitan q Ng iba mother board na le50k66doug tapes nagging dalawa ang picture o double division kaso wala panel settings another dapat gain ser

[@สุพัฒน์มองทัง]

👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾

[@MrBl1mp]

Baguhan electrician po ako sa tv Salamat idol cellphone at mga console games lang dati ku eni repair ngaun nag try na aku ng mga plasma at led tv at lahat video mu lods pinapanuod para dagdag knoledge sa ibang troubleshot lalu naka tulong yung isang video mu about sa samsung plasma igbt replacement kasi wala dun binilhan ku store yung parts na na igbt atleast available yung sa kanila yung 30j127 na igbt at na gumana salamat po idol.......... me tanung lang po ako kasi me na e repair po ako samsung plasma 51" no power. Na repair ko po yun ang sira e igbt, fuse at 2 capacitor ok na po sya me stanby tapos nung nag on na madilim at kulay pula yung picture. Na test kuna po lahat ng voltage pero ok naman, hindi ku ma adjust yung brightness kasi po pati uung menu sobreang dilim din di ku makita anu po kaya pwede e troubleshot ko po idol? Salamat po tulong

[@tevzTVTevatronics]

ano model yung tv?

[@MrBl1mp]

@@tevzTVTevatronics wow salamat idol eto pala yung model: ps51e490b1r samsung po na ayus kuna yung no power, ok na po stanby mode pero pag on ko dim at red po yung screen..... pinapanuod ko ngaun yung isang video nyu about dun sa dark image sa deviant naging solution nyu ay e test yung COF yung kabilang side ay dark... pati po kasi yung menu sa samsung madilim kaya hindi ku maadjust yung ibang setting, ma dim at pula rin... idol any opinion po ok po lahat ng voltage salamat po sa tulong.

[@pocketwatch6272]

Probably problem with the X sustain module…

[@MrBl1mp]

@@pocketwatch6272 ahhh ok sir thank you very much and I will 1st to try to resolder it for loose contact to the pcb board, then continuity test and hopefully when it good I check the voltage... thx sir I apprciate your suggestion..😊

[@ManilynTinguha]

Kaya q pinalitan ser page uminit ang ic biglang namamatay at Dina mag on page lumamig nag on nanaman nong pinalitan q Dina namatat

[@RioTintoGoAwayFromDrinaRiver]

What is the value of your ceramic resistor?

[@tevzTVTevatronics]

220 ohms 20 watts

[@RioTintoGoAwayFromDrinaRiver]

@@tevzTVTevatronics Thank's!

[@kabitaniasaas3368]

❤