HAIR RIPPING KIT!!!... | Zoids HMM Blade Liger AB Bang (Van) Version Review

  Рет қаралды 9,492

Vancy Hobbies

Vancy Hobbies

Күн бұрын

Пікірлер: 66
@LUCitsTHAILE
@LUCitsTHAILE Жыл бұрын
Watching the Blade Liger fall apart was hilarious. Can't wait for the 40th anniversary version build review!
@vancyhobbies
@vancyhobbies Жыл бұрын
I cried every time...
@RedRyu10
@RedRyu10 Жыл бұрын
​@@vancyhobbiessir i have question price for zoids long range buster cannon
@vancyhobbies
@vancyhobbies Жыл бұрын
@@RedRyu10 do you mean the weapon set?
@RedRyu10
@RedRyu10 Жыл бұрын
@@vancyhobbies burning liger weapon set
@vancyhobbies
@vancyhobbies Жыл бұрын
@@RedRyu10 unfortunately a lot of those weapon sets for the takara tomy kits have been discontinued. So they may be a bit expensive in the used market.
@probablychuuni
@probablychuuni Жыл бұрын
11:10 Did you plan for the blade to hit the Takara Tomy box so it fell down at the end? Absolutely hilarious even if unintentional, it looked like it just gave up on existing
@vancyhobbies
@vancyhobbies Жыл бұрын
Definitely unintentional, just seems like fates telling me something lol
@fatefinger
@fatefinger 11 ай бұрын
5:35 Not going to superglue the arm to the body? I had such a hard time with the equivalent area on the DCS-J I resorted to supergluing them together.
@vancyhobbies
@vancyhobbies 11 ай бұрын
I still plan on painting it, so anything that moves is not going to be glued for the time being. The small pieces, i splattered as much glue as possible.
@fatefinger
@fatefinger 10 ай бұрын
@@vancyhobbies Also you can replace the polycaps in the shoulders with 0.17" inner diameter clear vinyl tubing. Since the male end is 5mm in diameter .017" is about .6 MM too small so they won't fit so cut once lengthwise so the male end can actually fit. It's not quite as snug as the polycaps when they are fresh but snug enough it won't grenade. I got some at Ace Hardware.
@anlize3422
@anlize3422 Жыл бұрын
Nice review! Funny how the older Liger had independent claws. And yea... joint degradation is goddamn sad. I saw this kit for sale a few times but I held back on buying it because I felt that an old kit like that would have been bad to build due to the plastic already being old. Guess I avoided a holy hand grenade there. Side note, I was fully expecting the head to fly off during the shake test! Funny how it didn't.
@vancyhobbies
@vancyhobbies Жыл бұрын
Surprised it wasn't beheaded as well, considering everything was falling when I was handling it...
@spursnofficial
@spursnofficial Жыл бұрын
Always dun to watch Vancy review hand grenades. 🙌🏻
@vancyhobbies
@vancyhobbies Жыл бұрын
Lol glad you enjoy it.
@hammertronactionfigures2426
@hammertronactionfigures2426 Жыл бұрын
oh...This is the special battle damabed version of the model kit, right? Hopefully they'll have a new version of the model kit that holds together better.
@vancyhobbies
@vancyhobbies Жыл бұрын
We can dream 😄
@zengetsu7
@zengetsu7 Жыл бұрын
Bought the knockout (Black Knight) version. Had a tough time assembling this guy. The front legs seems to always fallout from the body. The tail isn't bendable like the other ligers (panzer, zero, jager, schneider). Gold should be the right color instead of yellow.
@vancyhobbies
@vancyhobbies Жыл бұрын
Ya 3rd party kits usually have quality issues, especially when it's base off of an older design. And yes gold is the way to go!
@odst72397
@odst72397 Жыл бұрын
Were there any improvements with the "non bang" version from the bang version?
@vancyhobbies
@vancyhobbies Жыл бұрын
No unfortunately, kotobukiya never improve the engineering for these kits.
@gilfelicisimocabrera1751
@gilfelicisimocabrera1751 Жыл бұрын
I glued the heck out of my HMM Blade Liger.I applied glue on everything that is not supposed to move.
@vancyhobbies
@vancyhobbies Жыл бұрын
Yes this is the only way!
@ExTrEmEStOrW
@ExTrEmEStOrW Жыл бұрын
the start is what happened to me alot to the point some parts broke completly i tried 2 blade liger AB, 1 blade liger mirage and the blade liger Blueray ( clear version) and ONLY the Blade liger blue ray was somewhat able to not break a single part during assembly. Edit: this caused me to AVOID the Shield Ligers and Blade ligers completly and i have been turning my friends away from building them unless they wanna feel Pain building it. the ONLY way i would build more blade ligers or shield ligers is if they change the leg pegs, there so small and easy to break, and they wear out the polycaps fast when posing multiple times instead of building and letting it sit without touching it, since the pegs grinds the polycaps clean making the legs no longer tightly hold on
@vancyhobbies
@vancyhobbies Жыл бұрын
Damn I knew they got bad but not THAT BAD. I wish kotobukiya would update the kit but that probably won't happen. 😞
@DarkKisame77
@DarkKisame77 Жыл бұрын
There's a Blade Liger releasing next year in a 40th Anniversary box, do you think it'll be bad too?
@vancyhobbies
@vancyhobbies Жыл бұрын
No, because despite sharing the same name they are from different manufacturers. That blade liger you are talking about has a different motorized frame, I have a review of it on my channel.
@DarkKisame77
@DarkKisame77 Жыл бұрын
​@@vancyhobbiesThanks, I also went and watched the HMM Command Wolf video. I wanted to get myself Van's Liger and Irvine's CW as model kits in matching boxes (I keep those for show), but i'm sad to learn they'll both constantly fall apart and it'll get even worse in a few years :(
@vancyhobbies
@vancyhobbies Жыл бұрын
Unfortunate circumstances of being early designed kits 😔
@megagundamva2694
@megagundamva2694 Жыл бұрын
guess its a good thing i didn't mess with my Blade liger.....and mine was the ORIGINAL VERSION NOT THE Van/Bang version
@vancyhobbies
@vancyhobbies Жыл бұрын
Lol good call, definitely a headache of a kit.
@sir_coma60
@sir_coma60 Жыл бұрын
I do wonder why polycaps are used. I'm new to the hobby, so I don't know how good polycaps are, but bandai's new WfM kits use no polycaps, and they are really solid. Even out of box WfM kits are much better than my new IBO kits.
@vancyhobbies
@vancyhobbies Жыл бұрын
Just old engineering, rubber polycaps were very popular in the early ages of model kits. Good thing is zoids has moved away from that and started using plastic on plastic joints as well. Just too bad they don't update old kits...
@lizzydaqueen420
@lizzydaqueen420 11 ай бұрын
A bit of clear nail polish put it on the joints allow it to dry and parts won't fall off as easily 😅
@vancyhobbies
@vancyhobbies 11 ай бұрын
Yup that works also, I prefer spraying clear coat paint. So my fiance doesn't get mad at me for taking her nail polish 😆
@azander1958
@azander1958 11 ай бұрын
when he put the fruits for scale im trying my hard to control my laugh as if its midnight
@vancyhobbies
@vancyhobbies 11 ай бұрын
I like snacking as I make videos so fruits are usually lying around 😆
@azander1958
@azander1958 11 ай бұрын
@@vancyhobbies bro is gonna eat that whole watermelone alone 🤣🤣
@vancyhobbies
@vancyhobbies 11 ай бұрын
Yes that is indeed within my power 😆
@azander1958
@azander1958 11 ай бұрын
@@vancyhobbies BRUH HAHAHA,anyways i have a question,i found a local seller that sells an AB Bang completely sealed and unbuilt, the question is that does the Pegs would stay put or does it also suffers from plastic degregation even tho it's still unbuilt?
@vancyhobbies
@vancyhobbies 11 ай бұрын
@@azander1958 joint degradation happens after it is put together. Overtime the polycaps and plastic connections start stretching when the pegs are attached. You can either glue lose pieces or spray some clear coat paint on the pieces after they get lose, this will solve a lot of issues.
@chibiterasu369
@chibiterasu369 Жыл бұрын
Started to laugh as if fell apart. I'm having major issues with it's front right leg, did the sticky tack "fix" your issue with it falling off?
@vancyhobbies
@vancyhobbies Жыл бұрын
Yes it did, quick easy fix and easily removable.
@chibiterasu369
@chibiterasu369 Жыл бұрын
@@vancyhobbies Thanks for the reply! Did you use any particular brand?
@vancyhobbies
@vancyhobbies Жыл бұрын
Nope just some generic blu tack from the dollar store.
@Portubrickz
@Portubrickz 9 ай бұрын
Damn that kit is about 400$ now I was thinking bout buying it 😢😮😳
@vancyhobbies
@vancyhobbies 9 ай бұрын
Ya it's unfortunate how expensive they are.
@hammertronactionfigures2426
@hammertronactionfigures2426 Жыл бұрын
Will there be joint degradation on Zoids kits in 2023 and beyond?
@vancyhobbies
@vancyhobbies Жыл бұрын
So good news is recent zoids kits as of 2020 until now have constantly been improving their frame. No joint problems coming from the rev raptor, reddlers and konig wolves. The wild liger and fang tiger have lost a little tightness in their joints but it is not nearly as bad as the older zoids , they still hold up well enough to be played around with. Thiugh some reissues based on older designs such as the shield liger dsj will still have the same issues, because they are based off the older frame.
@hammertronactionfigures2426
@hammertronactionfigures2426 Жыл бұрын
@@vancyhobbies oh COOL! Maybe anything after 2020 will be more likely to hold up better. We should watch out for re-ssuesi. Do you have any experience with Dibison, Gojulas, Gojulas Giga, Iron Kong, Storm Sworder, Godos, Panthers, Geno Saurers, and others?
@vancyhobbies
@vancyhobbies Жыл бұрын
@@hammertronactionfigures2426 Dibison holds up better than the ligers but is still lose. Iron kongs and gensaurer are a bit better. Haven't built the storm sworder yet so no comment there. The other kits you mentioned dont have an HMM variant and I dont have the takara tomy versions.
@foundingseven7759
@foundingseven7759 3 ай бұрын
Is this a bootleg?
@vancyhobbies
@vancyhobbies 3 ай бұрын
Nope, it's an official release.
@foundingseven7759
@foundingseven7759 3 ай бұрын
@@vancyhobbies damn even if it being Legit it still has loose joints
@vancyhobbies
@vancyhobbies 3 ай бұрын
Ya zoids manufactured during the early years from kotobukiya. The had issues with their rubber polycaps stretching overtimr leading to loose joints.
@Jr_North
@Jr_North Жыл бұрын
Do I say "first" now?
@vancyhobbies
@vancyhobbies Жыл бұрын
yes 🤣
@Jr_North
@Jr_North Жыл бұрын
@@vancyhobbies Great video btw, Blade Liger is near the top of my wanted list.
@vancyhobbies
@vancyhobbies Жыл бұрын
@@Jr_North glad you enjoyed it, thanks for watching!
MY NEW FAVORITE ZOID KIT!!! | Zoids HMM Konig Wolf Review
8:04
Vancy Hobbies
Рет қаралды 10 М.
Zoids Kotobukiya HMM Blade Liger AB 2020 Generic Reissue Model Kit Review
26:43
Starcrossed Souls - Zoids
Рет қаралды 2,5 М.
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Zoids 40th Anniversary Takara Tomy Blade Liger Review
10:17
Vancy Hobbies
Рет қаралды 11 М.
Blade Liger (AB) Unboxing
17:38
FeelGood Gunpla
Рет қаралды 320
Before You Buy: Zoids HMM Blade Liger AB Review
10:48
OmoCha Reviews
Рет қаралды 11 М.
You Were Right, ZOIDS Are AWESOME!!! - HMM Blade Liger AB Review
24:59
Mecha Gaikotsu
Рет қаралды 245 М.
Zoids Shield Liger 1/72 | ASMR BUILD | BT Model | ZOIDS
15:12
Synes Garage
Рет қаралды 32 М.
HMM Liger Zero Marking Plus Ver. Review
8:07
TheKrowSama
Рет қаралды 16 М.
LOVE HATE THIS KIT! | Zoids HMM Shield Liger (Marking Plus) Review
11:58
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН