Modifying the misaligned pedals in our 1938 International pickup.

[@davidsolloway9349]

A good wife, a loving dog and a project car ... doesn't get better than that !

[@johnyesko9006]

Forgot beer of your liking.

[@lawerencehughes4837]

HI Ester, Miss you being on the show. Your questions are mine as well! Thank you, Hi Pablo!!!

[@robertbennett9243]

Great to hear Ester again. I love "if it glows, it sticks".

[@not-pc6937]

Good to see you and Esther working together 👍your both looking well 😃

[@alanpaulick7815]

Great that Ester is helping out on the pedal fabricating. Thanks again for sharing Brent.

[@RandyH-qf3dc]

Progress is always a good thing. Some day are bigger steps than others. Good questions and support Esther.

[@nickhasenfratz2071]

Good job 👍🏻👍🏻

[@sargentslaughter3509]

My dad always enjoyed working on old vehicles. I'm sure he would have liked watching your channel.

[@rickfox6995]

Little bit by little bit. Get it the way you want. Be patient, and it will come together. You're the master of patience. Looking good

[@tarbogas66]

It was nice to hear you Esther, and great filming too ! Have a nice week both of you

[@jaimesan2609]

"We" agree. Nice to get Ester in on the fun.

[@johnkranz4004]

Coming along nicely Brent and Ester

[@henryallisonsr8318]

Just want to say hi to you all and I enjoy watching you work. Keep up the good work and have a blessed evening and night God bless

[@garylamb4777]

Thousands of miles away...... And still can make anyone's day

[@henryallisonsr8318]

Just want to say hi to you all and keep up the good work. You will getter done right. God bless and have a blessed evening and night

[@josephacerra5987]

Been missing the shop for a bit looks like lots of good stuff going on . Thanks for sharing 💯digging it

[@robertparker9718]

One step closer I can't wait till we take it for a cruise keep up the good work brother

[@PaulJFleischer]

That was very cool.

[@shanewright6958]

It’s coming along nicely 👍👍

[@brianphillippe1694]

as always enjoyable seeing you 2 working together coming up with solutions.

[@terrenceadams3481]

Hey Brent! Coming along nicely. Love it😃😃

[@fdwards12]

I had the same problem putting in a 2015L. 83 into a 79 El Camino. With 2014 Malibu interior steering column, I had to have a friend fabricate one up for me. That was a fun endeavor oh great work, keep it up.

[@4STEVEJOY34]

Camera girl (Esther) does good work with great commentary. Thank you both.😊

[@ghouliesgarage3922]

Wow what a treat ! Esther! Really enjoy when you're out in the shop your video skills are quite impressive ! Enjoying this build ! If I was able to still work and need around with vehicles ( I'm disabled) this is the kind I would do . With shiny paint there is too much involved! Thanks Brent & Esther!

[@davidhatch2558]

Nice to hear miss Ester. Nice to see Pablo. Progress Mr Brent. Thanks for the video Brent. See you again at some point

[@VicAmor1944]

Talk about steering column problems! Talk about trial and error! Thank goodness you have lots of parts to choose from! So, Brent I think you're happy with your new shop! Greetings from Honolulu!

[@eddiereeher7594]

good show.enjoy watchin u, I learn everyday watching u like always Keep on Truckin😎👍

[@billtopka2584]

Any progress is good progress! 👍😎

[@donh8973]

Nice job 👍

[@whittlerdave1440]

Little by little the truck is coming together you'll be driving this one pretty soon awesome build

[@bass60guy]

Metal manipulation is the key! Nice adjustment on the pedals!

[@daleking8529]

More progress!

[@AlanPitt-y3n]

Yes you need to stop and go good work guys 🛠😘👍🏼👍🏼

[@brentonpaterson7047]

Love the banter.

[@RichardBerry-v5i]

Looks good 👍

[@fonhollohan2908]

Y've made more progress, that's good.

[@richard8375]

Hey, keep up the good work like watching you

[@TheCrackerBox]

Thanks for another , Brother !

[@hankomdeur7665]

Hi Brent, Love your builds For me your an magician

[@nightworrior666]

Good video

[@kentmckean6795]

5:30 Looks like you are creating/building a computerized arcade/pinball machine. Love to see/hear about it!

[@ericfallis6202]

It's going to be awesome

[@tedzirbes6713]

Truck is coming along great 👍🏻

[@rickyball6707]

Great bit of engineering👍👍👍

[@peterouellette3874]

A little bit here a little bit there. Nice going, Brent

[@blahblah4125]

The look on your dog's face is pretty funny when you are working, he is not nearly as impressed as we are watching lol

[@mikeseldomridge8052]

Great camera work

[@FlatThunder]

Beer Cad to Real Cad to Metal Pedal!....I have used a laser software to trace images before and it turns out pretty decent; make beer cad template, snap a picture upload into Lightburn, trace image, export DXF. It is a relatively cheap and powerful software. Give it a shot sometime. Nice Work! 👍😁

[@WildBillFlysRC]

Those pedals look Hot! looking good HK!

[@richardhill4862]

I think the pedals are a lot better, its the little things that drive you nuts that you should have done. Liking it.

[@Wrenchen-with-Darren]

Nice work

[@shaneross3344]

tap out those fitting to a pipe thread and put in plug saves you from welding them up incase you need them for something later

[@hensleyshobbies-doug7761]

Still, looking good Hoss, 👍👍🤙🏻🤙🏻✌🏻

[@RobertFay]

*- If you check at **0:54**, you will see the master cylinder is not plumb, but tips up at the firewall.* *...and That causes the pedal to be higher, or further away from the floor.*

[@1936Studebaker]

You could have cut the pedal pad off the shaft and flip the shaft 90 degrees (up side down) and weld the pad back onto the oppersite end, should give you the right angle, I did it on my 36 Studebaker pickup.

[@blakestone8088]

thx folks

[@GerryMiller-y4d]

Coming along

[@luisrivera3056]

Pablo likes the radiant heat from the floor.. lol

[@tugmountianroadcampers5582]

Enjoy seeing (Hearing) Ester, but i think you explain things better when you`re just talking to the camera.

[@kodak_jack]

This was posted pretty late. You are a really dedicated guy.

[@MarqusReyes-yi4ww]

The steering shaft is made like that so if your in a head on coalition it will collapse and not injure you

[@barbarabarnes946]

'Your" what's going on! Great build!

[@simonevans343]

You're

[@glennnickerson8438]

I'm shipping my next project up to you Brent, it's the only way I'll get it done! Hopefully there will not be a postal strike anytime soon!😆

[@pauloperazza5798]

Show👍👍

[@russellmiller2801]

Do not shorten the rod. Shim the master out. Then you can add or remove shims to get the proper stroke.

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job Sir ❤❤❤❤❤

[@cobramike9538]

Did you build a digital pinball machine?

[@HalfassKustoms]

Working on it haha

[@morgansword]

No matter what gets done, its a win or lose deal. Its also why some give up because they figured there was not this much work in this project. Do all big dogs think their throat was cut when its dinner time. My dog is so like yours as to dad, its dinner time and I am starving.,... haven't ate anything for six months hungry time ....

[@just4guitar558]

Middle of the night drop, odd. Cool beans, tho!

[@geoffreymills9932]

Don't know where you get metal for a hundred bucks a sheet but I'd love to get in on that, 18 gauge is over 300 in the US

[@markoslejsek5974]

Can you take the upper part of the swing arm and turn it around.

[@denyadroid2713]

ніколи не думав що педалі можна підлаштувати під себе особисто :). хороша ідея!

[@garrykellogg3215]

Can't you use the 'FastCut' Plasma Cutter to plot the points?

[@jimconnelly3362]

PASS THE Marlboro REDS.

[@philliphayes9766]

A, S.W.A.G. (scientific wild ass guess) thought check the old Pontiac pathfinder windshield for a possible fit to the 55/56 Buick, maybe

[@randydoolitle6867]

👍

[@bigbellyrebuilds2778]

Man I have had a lot of days where I put in a lot of work but seems like I didnt get much done.

[@abelvargas3318]

I would cut the Clutch Pedal and the Brake Pedal and Switch them, Welded back up

[@HalfassKustoms]

Could but the brake pedal is much thicker than the clutch is.

[@n9uib]

who else is curious how many steps Brent and pablo get in every day ????? lol

[@luisrivera3056]

Hot glue gun helps as a third hand to hold cardboard in place for tracing patterns.

[@Bibleblessings.Outop1957]

Well. Hey. I'm looking. And looking. And i have no idea what you'r doing. 😂😂😂

[@retiredbutnotdead9929]

And the pedal adjustment duo solve yet another brake and clutch ratio dilemma…sort of, I think….

[@terrencebuller7676]

Early morning notice was a pleasant surprise. Wish you and Esther a great day. Take care 👍

[@dannysharon2635]

Hi , the "clicking" from the neon sign is very load...

[@gpl422sda]

And we got the elbow...

[@papabatsquatch]

Greetings, what kind of CAD do you use on your fast cut?

[@mikeseldomridge8052]

Do you quit working when you run out of lite boxes? LOL!!!!!

[@irvinmclaughlin7294]

you got to add wire, grinding wheels,torch gas and oxygen, that stuff isnt free

[@davidsolloway9349]

like 1.9K !

[@donames6941]

I would just weld on a 1/4x1 bar stock 3 inch long and screw that neutral start switch

[@timothyabraham2228]

Brent, are u building ur own pinball machine ?! Or atleast putting old game works into a new box-case ?!

[@craigsowers8456]

Ah yes, the inevitable clash of technology ... how to explain to younger gens that only know how to read a digital read out time device what "Clocking" means. LOL

[@BenSymington]

[@JamesCritendon-l8m]

Like drawing a Pacman That game used to be popular

[@michaelhartloff3833]

Wassup

[@yvestressens3990]

😃🤚👏👍

[@MyFairbanks]

I watch another channel and hate the sound of his wife to the point of muting her. Ester, however is an enjoyable addition. I don’t know why but like her intelligent background comments.

[@J.Wesley007]

Yep I agree, she has almost ruined that channel. For me anyway.

[@matttaylor373]

just wanted to say thanks for the videos! pluse say that I would rather get anything half-assed from you ,than anything that most of these fat ass keyboard warriors could ever try to build!

[@ibraunchy20-vn5kd]

Brent , I used a rubber axle bump stop on my clutch pedal arm on my 52 chevy p-up to keep it from going to far ,Keep the vids coming

[@rangerider9091]

The back and forth banter between you and Esther is most annoying in my opinion. I’m sure not everyone feels the same but for me it detracts from an otherwise great show Love the build Brent.

[@antionnefreeman2732]

Hater

[@DuncanMunro-t7c]

I think it's wonderful that he has a wife that has a genuine interest in his hobbies and enjoys being out in the shop with him! It seems to me that they have a strong relationship and I would suggest this is part of the reason they do.