that was the most beautiful de-soldering and soldering job I've ever seen
@UberMicroRepairs7 ай бұрын
Thank you.
@noob_br16093 ай бұрын
😂😂😂
@anasevi94568 ай бұрын
1:41 great video, and yeah it is annoying how people think a new set of shocks will keep the old crusty tyres from blowing over potholes. Hall are vastly more reliable due to being contactless, will stop out of the box and not beat up drift; but everything else is still getting mashed up by wear and tear..
@brianwalker7771 Жыл бұрын
True Hall effect sticks may not completely eliminate stick drift since everything wears out eventually but at this point we need something more durable than the crap that is in controllers at the moment. I am happy to see some viable options now becoming available. Hopefully we will get options for other pads some time soon. I am looking at you XBOX! Also viable replacements for old pads such as the xbox,xbox 360,PS1,PS2 ,PS3 and any other aging pads would be amazing to see. So many worn out pads that could be resurrected rather than tossed without having to play good part or trash roulette online.
@OG_ALviK Жыл бұрын
The plastics of the body and buttons will wear out sooner than the magnetic field for the hall sensors.
@schwarzerafri9015 Жыл бұрын
They also work in Xbox One / Series / Elite Pads, they all use 10k pots / hall sensors. And the sticks are available for the PS5 with 2.3k Sensors, too.
@koruzhuv2.087 Жыл бұрын
@@schwarzerafri9015so the one that work with xbox one s controller are the 10k one? Not the 2k3?
@UberMicroRepairs8 ай бұрын
100% agree!
@Flipz36 Жыл бұрын
thanks for the video. just fitted both my scufs with these, works perfect
@MasterAgario11 ай бұрын
Where did you buy them from?
@TakeNoteZ3 ай бұрын
@@MasterAgariowher can i get it
@Soul9425510 ай бұрын
I swear Sony used some kind of magical Sonium material made from the gods to solder those sticks on because even with using flux, adding fresh leaded solder, and using a hot air gun, and trying a solder sucker, NOTHING could get those fucking sticks off. I actually ended up melting the original joysticks plastic bits trying to remove it with hot air. Kudos to you for being able to get it off for these hall effect sticks. I just said forget it and sent the hall effects back to the shipper.
@swiftsilver Жыл бұрын
I kept seeing these for fairly cheap compared to the joycon ones, I guess they really are legit. Definetly going to pick up a couple
@UberMicroRepairs Жыл бұрын
yep, they seem very good quality.
@getit7107 Жыл бұрын
That's cool they come with a custom magnetic sensor that can match the original output signal. I was thinking it was gonna need some add on board to go with it but everything is on the analog itself. Interesting and also that last ps4 battle beaver vid was a great late night watch for me before bed. 😁👍
@UberMicroRepairs Жыл бұрын
Nice one! Yeah these are specifically for the PS4.
@akagicac11 ай бұрын
Hola, compre unos joystick de estos en aliexpres y al instalar el mando deja de funcionar, sabes q puede ser, gracias@@UberMicroRepairs
@Verdaderevelada346 ай бұрын
Wow you sure have some technique you got the moves bro!
@kevrosbane Жыл бұрын
the magnets will also lose magnetism over time causing drift or if left near a powerful magnet like a sub woofer for a week would be enough to change the field then you need to recalibrate them. wear and tear and the field even the hall sensor it self can fail. is why im always confused why people believe it can never drift.
@UberMicroRepairs Жыл бұрын
I not sure the magnets would weaken enough. I'd bet wear and tear would happen to the module long before the magnet weakens. They are neodymium . There are Dreamcast and Xbox One controllers using standard ferrite magnets and hall effect sensors that are decades old now. All still work fine. I guess time will tell.
@chpokerTV Жыл бұрын
i had hall sensor Ps3 controller, 10 years no drift, perfect center. But yeah magnetism will get weaker true, but at that time you will be dead already.
@UberMicroRepairs Жыл бұрын
@@chpokerTV Agreed. The PS3 analogs in the SIXAXIS controller suffered from worn out springs. The stick didn't return back to centre. I will predict the same will happen to these hall effect analogs.
@sparda1418 Жыл бұрын
I have two PS3 controllers since 2010 and never had stick drift so clearly you don’t know what you’re talking about
@techhoarder3416 Жыл бұрын
OEM Dreamcast controllers don't have drift issues and they're two decades old. It is more likely that the magnetic field will outlast you as long as you treat the controller properly. I still have my OEM Dreamcast controllers and they work as good as the day I bought them.
@Retro2ModernGaming Жыл бұрын
Please tell me where I can buy these hall effect sensors, and please confirm to me that these can work with Nintendo Switch Pro Controllers (since they use ALPS sticks like the PS4, PS5, and Xbox controllers). EDIT: Never mind, I found the same sticks on the Uber Micro shop. All I need just a confirmation on whether these same sticks work on Nintendo Switch Pro Controllers.
@agueaza3707 Жыл бұрын
i have installed in it to my fake ds4, it is look perfect and no need to recalibrate.
@Sean-vn7bt Жыл бұрын
What are the temperature and aire pressure that you use for the hot air station? In addition, I noticed that the metal plate and the pcb holder was not in the description, what is it?
@newfbl00d46 Жыл бұрын
would the ps4 calibration software you featured in another video work for setting these dead center?
@IamHater92 Жыл бұрын
Яндекс переводчик отжигает: "Давай засунем это чучело обратно в скорлупу" :D
@UberMicroRepairs Жыл бұрын
We have some refurbished PS4 controllers with Hall Effect analogs installed for sale here: www.ubermicro.co.uk/product-category/shop-area/refurbished-controllers/refurb-playstation-controllers/
@mikeeyram7 ай бұрын
There is a calibration python script for PS4 controllers, makes install a lot easier.
@rgbroot Жыл бұрын
To calibrate, did you turn the logo in the potentiometer hole in the case?
@jesterolog711 ай бұрын
Very nice video. but what is the 49331 element ? what inside ? ))) how its working ? where can i buy this ?
@evolainasu23919 ай бұрын
I don't understand how to calibrate the magnetic joysticks, could you explain?
@5DiFika4 ай бұрын
uber. hi,, how do you calibrate those, there is a screw you need to turn clockwise inside those tiny holes or there is just a button inside those tiny holes?
@jelleraffel5 Жыл бұрын
Hi! My roller has a lot of stickdrift so I'd love to replace it with hall effect joysticks. Where did you buy these?
@TheRealDJSigma Жыл бұрын
This is unrelated to this video, but I wanted to ask - you know the unresponsive face button issue with the Elite Series 2 controllers, which seems to affect the A button in particular? Are you able to repair that, or is it a design flaw that is not something you can fix?
@UberMicroRepairs Жыл бұрын
We offer Elite 2 button repair as part of our service. Also rear paddles.
@yuxia2019 Жыл бұрын
nice video, I got a question though, how did you calibrate it? I got a controller with the same sensor and it has around 0.04 upward in the right stick, do you just stick in that hole and randomly push the stick around until you get a lucky one and then pull out?
@Guitar8202 Жыл бұрын
He calibrate sticks with tweezers, moving magnet near hall sensor.
@ClovvnGaming Жыл бұрын
Hi there, have you try to put these hall effect module to the dualsense edge module? I'm not sure if the voltage is ok
@D1S0- Жыл бұрын
Voltage is not ok, not possible
@Gamehunter4070 Жыл бұрын
Do you have any complaints from customers or not satisfied ?
@UberMicroRepairs Жыл бұрын
All good. They work and track fine.
@ChainFire1310 ай бұрын
Whats the name of the solder sucker your using in the video
@DaRockCandy Жыл бұрын
do these require a separate controller board? or how does this work? why do some modules require a separate controller board?
@Huzaliproductions Жыл бұрын
Nice Video what temperature did you set at the hot air station? Previous i desoldered with an iron it was not so fun...
@mundogamersguayaquil25247 ай бұрын
disculpa la pregunta que tipo de estacion de calor usas y cuanta temperatura usas y cuanto de aire ? para sacarlo los joystick sin flux ¡?
@UberMicroRepairs6 ай бұрын
No hay problema. Tengo un Atten ST-862D. Temp @ aproximadamente 395c y flujo de aire al 50%
@mundogamersguayaquil25246 ай бұрын
@@UberMicroRepairs y el flux amigo q marca usas
@UberMicroRepairs6 ай бұрын
@@mundogamersguayaquil2524 Here you go: ubermicro.co.uk/product/kingbo-soldering-flux-rma-218-10cc/
@chabandou Жыл бұрын
Can you elaborate on the calibration process, What software did you use to calibrate?
@itzMcRaw Жыл бұрын
gamepadtester site
@walterwolfgaming Жыл бұрын
Nice 👍.. I also thinking about that to improve my controllers but i already have a lot of Alps analogs 😂
@UberMicroRepairs Жыл бұрын
I have over 3500 different kinds ALPS analogs in stock. Now I have to add another line.. It's never a good time to change. lol
@ItsBozzy Жыл бұрын
@Uber Micro Repairs , what are you using to connect the controller board via usb to the pc? Thanks!
@Jeff_Jaguar Жыл бұрын
That's just the micro usb daughter board already in the controller
@kirkmorrison6413 Жыл бұрын
What’s a good temp to have my heat gun and soldering iron at in order to work on these boards?
@adampadmore9767 Жыл бұрын
What sort of weight spring is in them would you say the same tension as standard or slightly increased?
@Chrisj-Pops Жыл бұрын
Nicely done 👍. What temp and air speed do you use
@UberMicroRepairs Жыл бұрын
Thanks man, Temp @ 400c Air flow @ 50% using an Atten ST-862D
@NexProPL10 ай бұрын
Hey, wanna ask. I repace it to hall analog aswell on motherboard JDM-040 and it doesnt work. Motherboard does not detected them. Have you any solution why? I see you have JDM-055.
@brayan121895 Жыл бұрын
I don't quite understand the principle of calibrating the analogs, why is it necessary to insert the tips ?
@mitchtube34 ай бұрын
So I've installed them but the input is showing 100% left up position on both and I can't figure out why...?
@UberMicroRepairs4 ай бұрын
check the soldering for bridges or pulled pads.
@sajjadxgamer9014 Жыл бұрын
Were i can puy the sticks
@turboslug36 ай бұрын
What website did you use to center the sticks
@tv_you-_-tube_tv22 күн бұрын
En joystick magneticos, L3=ps4 , L4=ps5 y L8= xbox??? se sigue esta regla? O nada que ver? Pedí algunos de ellos para ps5 y me vinieron L4 y L8. Sería lo mismo L4 y L8 Para controles de ps5?? 🤔
@leedchristensen Жыл бұрын
What are you doing sticking the tweezers in there and moving the stick? Can you fix stick drift with the stock pots like this?
@EneRec8 ай бұрын
No. He's moving the magnet placing for the hall effect and normal sticks have potentiometers
@allesklar7267 Жыл бұрын
Why didn't you cslibrate it with the software? Did you try it?
@UberMicroRepairs Жыл бұрын
Because I wanted to show a true representation on how they where intended to be used. However. At the time of this video I used the software and the results wern't great. 9/10 times you get reduced travel in the diagonals when calibrated with the software. I have since figured out a method to get them calibrated and work spot on!
@allesklar7267 Жыл бұрын
@@UberMicroRepairs so you found a calibration method where the travel in the diagonals are the same as the alps analog sticks?
@oledevo Жыл бұрын
I've installed these in a new dualshock. I watched your video. Can you give us another one showing software calibration as well? @@UberMicroRepairs
@algerian2389 Жыл бұрын
what temperature you are have on your heat gun ? you took it out very easy im struggling with it
@ravitejaj557910 ай бұрын
Key is adding a bit of solder to the joints before heating them up
@victorstk Жыл бұрын
where did you buy those sensors? I want to get some
@steelpuxnastik_yt Жыл бұрын
Yes, where?
@SuperLuigiGuy64 Жыл бұрын
Aliexpress
@jeffforrest5921 Жыл бұрын
I have a scuf reflex (ps5 scuf) with bad drift that I'd be happy to send you if you wanted to do a similar video with the hall effect thumbsticks
@Flowkeyz Жыл бұрын
Will the jittering be also filtered out on pc?
@UberMicroRepairs Жыл бұрын
Should be.. Although it looks bad.. it's so minute I doubt it will really effect anything.
@EDOD_EseDelOtroDia Жыл бұрын
Most games come with a 10% dead zone for analog sticks. The jittering only occurs in a 2% zone. So nope, there wouldn't be any problem with any game. In fact the only way for it to become a problem would be by purposedly shrinking the deadzone using DS4Windows or a similar software.
@texblade237 Жыл бұрын
How much to get two xbox controllers installed with thiese??? Im really tired of buy controller after controller only for them to drift after a month
@jelleraffel5 Жыл бұрын
Does the jittering affect performance on Apex Legends while playing on NONE deadzone?
@szymons3500 Жыл бұрын
The jittering does not affect the games, I already tested
@xVxEsports Жыл бұрын
Would these work on a Xbox series X controller? Specifically the scuf instinct Pro and do you do send ins for this modification?
@MrBenedick14 Жыл бұрын
Yes
@bkid17769 ай бұрын
Can you order these thumbsticks for the ps5 controller also if you buy a ps4 controller stock can you install the scuf thumbsticks on it? @Uber Micro Repairs
@GOATGamerProSticks Жыл бұрын
You need to turn test circularity on & get the Average Error: To about 10.9% or lower with 3x3mm ohms resistance trim pots to reduce menu scrolling skip speed, this is fab stuff as foundational pot tech looks, good find 👍🏼. Shrink the circle overshoot enough this could serve Dualsense also on 2K3 Pots with a lower resistance trim pot to equal the required value 😉😜😁🫸🏼🎮🫷🏼🙏🏼🕹️🕹️🎯🎯.
@UberMicroRepairs Жыл бұрын
Thanks for the tips! Please don't take this personally (I'm extremely passionate about our repairs) but we do not and will NEVER use trim pots (Stick Drift Fix boards) or resistors. They are a lazy, hack fix IMO and we remove them on all controllers when we find them installed. We get all our sticks to calibrate to within 3% and full 100% range around the clock without any of those methods. We use the Controller tester coupled with DS4-Windows so I get the full raw analog reading not the default Windows calibration that has a default deadzone of 10%. Again Trim pots (Stick Drift Fix boards) or resistors anything like that, we will never use as I believe they are a really bad fix and doesn't address the underlying cause of drift (which is the wear / dirt on the carbon track). Having to fix 10 - 15 controllers on top of consoles a day we have a fast, efficent and reliable method that mitigates the carbon track wear. Over the years I've see so many methods, some even including a full blown maths lesson, all amounting to wasted time. Especially as DS4 controllers can now be calibrated and the reading wirtten back to FW.
@GOATGamerProSticks Жыл бұрын
@@UberMicroRepairs I don't use fix boards either just the raw trim pots from 1M+1M minimum shrink, 1M, 500, 200, 100, 50, 30 & 20+20K max shrink twin & single trim pot combos for best results, it's not efficient but I discovered it all as a fully qualified know nothing using Grey 10.24K primary potentiometer sides 🫣, probably a crime by your standards but I made it work lol. I fitted Xbox one elite series 2 sticks in my DS4 🎮 the same way, but with hall sides it could get better results 😉, there not very mechanically tight tolerance the series 2 pots I fitted. My soldering skills are that of a child from looking at your speed, but I did painful research 🤷🏼♂️. I custom built Analog stick tops better than anything out there & that's as far as I got, better than mod sticks & Xbox magnetic sticks & there modular to fit in anything that uses either the screw 🔩 pin of elite series 2 or traditional push fit 4mm plastic pins with 3mm width flats, best thing the markets may never see 🥺... I'm sorry if we have already had this conversation? 🤔💭🧐 I can be a broken record 🤷🏼♂️.
@schwarzerafri9015 Жыл бұрын
@@UberMicroRepairs i already used the Calibration Tool and have a Flash Dump of my Controller. But it seems there is no option to restore it if something goes wrong. But for the most issues (like the expanding middle slot or some few %s off) the calibration tool is pretty nice. Do you know how to flash the dump back if anything goes wrong (like usb connection error while writing the data) ?
@The_antisocial_streamer Жыл бұрын
@@UberMicroRepairsevening fella, how do you couple ds4windows with gamelan tester as I'm having major issues trying to test sticks on ps4/ps5 controllers lol.
@KN-5929 ай бұрын
sucks that we are in 2024 and things like dualsense edge cost hundreds and no hall effect
@UberMicroRepairs9 ай бұрын
Cashing in on the parts that wear out!
@KN-5929 ай бұрын
@@UberMicroRepairs amen, seeing you mod these and repair is inspiring lol
@fredyjimenez8951 Жыл бұрын
in dualsense, is possible?
@mohammedshafiul6522 Жыл бұрын
Where can i buy these hall effect joysticks from ?
@UberMicroRepairs Жыл бұрын
One of my Chinese suppliers. I may have them on our site for sale in a few weeks. I'm adding a page to our website today to take interest in these analogs. If you fill in the form you'll get notified when we have them up for sale. Check out our site in 24 hours www.ubermicro.co.uk
@allesklar7267 Жыл бұрын
Aliexpress
@C4L1-C0 Жыл бұрын
Can u give out the link for the sticks im trying to do this gr8 vid btw💙
@redguitar1018 Жыл бұрын
good video just wondering is it fit on switch pro controller?
@UberMicroRepairs Жыл бұрын
Thanks, As I said in the video I'm not sure they will.
@karlgriff8 Жыл бұрын
Nice one. Could these work in a ps5 controller as well as some use the same modules
@mohammedshafiul6522 Жыл бұрын
I remember I saw a post which says these won't work on dualsense since these require few more volts to operate which the dualsense don't provide.
@UberMicroRepairs Жыл бұрын
So far I've not got them working on PS5 controllers. There are a few factor that are different like the PS5 uses a lower voltage and the pinout is rotated. Not to mention the pot resistance and range is different.
@pootnannies Жыл бұрын
i tried and the controller does not work correctly. it takes some of the voltage out of circuit or something. the controller powers on, flashes twice and turns off. the R/L adaptive trigger motors will tick as well.
@UberMicroRepairs Жыл бұрын
@@pootnannies Yeah.. The PS5 controller analog work on 1.7v and the hall analog need 3.3v also the Hall analogs need + and - to be the correct way round. They really just will not work. with out cutting traces and feeding them from a 3.3v supply. It's a lot of work even if you know what you are doing.
@J.C.2.5 Жыл бұрын
@@UberMicroRepairsI've seen a shop online claiming they are able to out hall effect sticks on a dual sense controller. From the looks of it, it seems like they are using the same module you are using. Maybe you can check them out. They're called PXP Repair from the Philippines.
@DetroitMetroRetro Жыл бұрын
How do you calibrate the errors?
@sporadic3684 Жыл бұрын
ds4-tools and as the name suggests it only works for ds4 controllers.
@pootnannies Жыл бұрын
where do you get these?
@UberMicroRepairs Жыл бұрын
One of my Chinese suppliers. I may have them on our site for sale in a few weeks.
@popahly1 Жыл бұрын
Is it works with xbox series controllers?
@UberMicroRepairs Жыл бұрын
Unfortunately not. Same for PS5 controllers. The operating voltage and polarity are incorrect. PS4 only! 😪
@-Gothicgirl-5 ай бұрын
Or the magnet Lose ist magnetic function the the sticks are Bad too
@J-U-i-i-C-E11 ай бұрын
Can I purchase one ?
@WolfEmerald214 Жыл бұрын
Do these work on ps5? If so maybe I could make a modded ps5 controller with back buttons with these joystick. (Or probably pay you to add the joysticks lol)
@giovannigiorgio2262 Жыл бұрын
why its shaking ???
@UberMicroRepairs Жыл бұрын
Jitter thats what happes with these HE analogs. We have another method comming soon. That reduces the jitter and properly calibrates the centre and full range.
@giovannigiorgio2262 Жыл бұрын
@@UberMicroRepairs i want ask its worth it or not ? bec bro if u keep desolder analog u lose the hole pads " ita happen to me" and u cant use the controller again . is this just one use and u will never solder again ??
@AsmArgentina10 ай бұрын
Jitter? Cod work's?
@thegoatfpv65674 ай бұрын
No jitter all games work, no difference from normal except no stick drift
@yu-yq4ic Жыл бұрын
The circularity tho. It will be wonky af in game
@UberMicroRepairs Жыл бұрын
I have since worked out how to sort that. As long as the circularity is out side the 100% in the diaginals it will be fine. Even new out of the box DS5 controllers have wonky results on that test.
@yu-yq4ic Жыл бұрын
@UberMicroRepairs it will mean that the diagonal will reach the 100% ingame eariler than normal. Atleast for ps4/5. Its not fine
@UberMicroRepairs Жыл бұрын
@@yu-yq4ic Again please ignore what you see in the video with the circularity test . I just made sure it got to 100% at the main 90 degree angles for the purpose of this video! Either way the circularity isn't a "be all and end all test". Aslong as the stick goes outside the 100% range in the diaginals IT'S FINE! Untill you have tested literally every brand of PS4 / 5 and Xbox controller Old new or repaired Broken beat & scarred. You would know circularity is just that websites interpretation of it!! Noting to do with Sony or M$ it just the RAW readings.
@yu-yq4ic Жыл бұрын
Yea, pc, xbox, and playstation games have different responce from the input. My concerns came from when ive installed off brand potentiometers into ps. It didnt pruduce the exact response of the defult sensor. For ps controller, ideally it should be calibrated to perfectly line up with the circle, atleast for ps
@dyxphoria1943 Жыл бұрын
@@yu-yq4ic circularity doesnt make any difference in game.
@giovannigiorgio2262 Жыл бұрын
is work on xbox one ??
@UberMicroRepairs Жыл бұрын
We have somthing in the works coming soon for Xbox.
@giovannigiorgio2262 Жыл бұрын
@@UberMicroRepairs good
@TheModgenius9 ай бұрын
If you were to do a proper repair you would install the Hall effect driver board to allow proper calibration.
@UberMicroRepairs9 ай бұрын
This was recorded before the boards was out, just published afterwards. Look at the rest of my videos to see how it's done. Becides that.. IF I WERE to do aproper repair I wouldn't use the redundant calibration boards on a PS4 controller I'd use the calibration software and do a evenmore proper-er job! 🙃
@TheModgenius9 ай бұрын
@@UberMicroRepairs I am not talking about the china junk of the pcb add ons. 🤣 those are in fact junk. If you knew who I was you would know that I know what I am talking about. Can find me in all the cell phone groups under the name of Shawn Blair.
@TheModgenius9 ай бұрын
@@UberMicroRepairs also looking over your videos not very impressed 🤷 if you truely knew hot to do a proper Hall effect install you would have driver board installs. Their spot on every time.
@TheModgenius9 ай бұрын
@@UberMicroRepairs also their is no software for Sony that will give you a proper calibration. What we use we have a complete 0 deadzone. You must be thinking of the cheap shitty boards that just increase the resistance. These boards I am talking about takes all signals and adjusts them based on what you want and outputs those signals. Also not a noob here. I have been microsoldering since 2009. If you look in all the cell phone groups you will know who I am 🙄
@hakimdurand84278 ай бұрын
Well...While your talking to the youtube channel owner.. uhm what are these boards your talking about? I wanna get some hall sticks for my ps4 controller and I'd like to calibrate it the right way as your stated. I'm personally not a fan of all the jittering i saw in the video@@TheModgenius
@addingletters465 Жыл бұрын
I want one
@UberMicroRepairs Жыл бұрын
We have some refurbished PS4 controllers with Hall effect analogs installed for sale here: www.ubermicro.co.uk/product-category/shop-area/refurbished-controllers/refurb-playstation-controllers/
@Witoskratos Жыл бұрын
Отцентруй их программой.
@GOATGamerProSticks Жыл бұрын
Is there actually any working difference between the DS4, Dualsense & Xbox one hall effect potentiometers other than the fact they switched around the black & orange side mounts that you know of 🤷🏼♂️, or is it one fits all with an attempted segregation between products 😉, switching the L & R colour coding idea 💡 of these sticks 🕹️. It looks like they are trying to pull a fast one for product segregation purposes 😂🤣😭, a one fits all option will destroy the scam of the old market & they/them 🫵🏼 know it 😜.
@Marcheziora Жыл бұрын
The diagonals are pretty terrible on this stick, I don't like it.
@szymons3500 Жыл бұрын
Mount these analogs and test them on console games, and you'll change your mind 👍, I live in Poland, I tested these analogs and I'm sure they work very well, now I ordered analogs for Xbox One and PS5 pads.
@fnoorf Жыл бұрын
Does it work on ps5? Need your thought cuz I'm seeing the one for ps5 on aliexpress
@szymons3500 Жыл бұрын
@@fnoorf I haven't received the shipment with analogs for Xbox One and PS5 yet, but analogs with Hall sensor matching PS4 work well because I tested