[Hallberg-Rassy 312] "Ellos"- Sea4See - MAHOGANY FRAMES & MOONLIGHT HATCHES (INSTALLED)

[@martindalbecp.eng.7450]

You attention to details is incredible. THe woodwork is beautifull. You will be scare to sail your boat. You may scratch it. Make your shower leak test before sealing glueing everything ;)

[@sea4see]

Hello Martin! Non care about scratch... if happen no problem... I will kill who hit me🤣🤣🤣🤣🤣 yes for sure I will test all the stuff with water and I will check if drop of water enter the cabin!!!

[@charabanc1418]

Crucial components are paying off for Ellos - patience, skill, time, resources, time and skilled friends. What a great opportunity to make a good boat better. Thanks for sharing.

[@sea4see]

Ciao David! Yes you say right... I need more time .. if I had a 6 months off for sure in this time of the year I will be under sail... but I’m the reality i stolen hours from my free time.... sometimes is very difficult!!!

[@dhamma58]

I am always happy and amused when various channels repeat the Athena mantra...glorious glorious sanding....truly a cathe-phrase for the ages!

[@sea4see]

Ah ah is the mantra!!!!

[@mikewillis2934]

Great job!

[@sea4see]

Thx Mike!!💪🏻👍🏻

[@leonardkevin12]

Your boat is coming together very well, really good looking.

[@sea4see]

Thx a lot Kevin! Try to do the best I can!!!

[@paulbrown2971]

Measure twice, cut once! Complimenti, come sempre.

[@sea4see]

Hello Paul.... and still I make mistake so measure 4 time ....🤣🤣🤣

[@daviddailey4959]

I look so forward to your documentation of this refit. You are doing beautiful work!

[@sea4see]

Thx a lot David for join me in this adventure!!!

[@daviddailey4959]

sea4see I have watched and am watching almost every boat/sailboat refit I can find on KZbin and you have to be one of my favorites. I think it is a combination of things, your dialect as you speak English is so fun to hear, my great grandparents were from near where you are doing this refit, just a combination of so many things.. thank you so much, I realize this is a lot of work not only what we see but the hours it takes to edit and publish a video.

[@sea4see]

David Dailey thx s lot David! You can always come here to meet me!

[@georgesbonellodupuis8245]

Wow. Meraviglioso.!! You must be VERY HAPPY with the quality of the finish.!! Better than most new boats. And the attention to details is fantastico.! Complimenti e saluti da Malta.

[@sea4see]

Grazie mille George! La qualità e importante per un ottimo risultato!! Ps my sarebbe piaciuto avere la bandiera di Malta sulla barca .. ma che costi!!!!

[@georgesbonellodupuis8245]

sea4see is. I costi sono aumentati. La mia Barca e Valletta e pago €200 ogni anno. Ho un gommone di 8.2 metri e pago €10 con registrazione SSR a londra.

[@sea4see]

Georges Bonello DuPuis pero cari a malta!,,,,

[@xJjbklikhb]

Great job! I'm really stoked to see here in the water.

[@sea4see]

I will be shocked too and hope soonnnnn!!😜

[@sjp52047]

Very good progress. The wood work is beautiful. and having the hatches sealed will keep it that way. It's the details you're doing that are so good. Regards, Solomon

[@sea4see]

Thx a lot Solomon! I like detail but sometimes is hard to reach the best,

[@nena4215]

That was an adorable opening! Nena DiSanto

[@sea4see]

Thx s lot! I enjoy too to cycling on the lake... 👍🏻👍🏻👍🏻

[@brownmilligan1936]

look this good. nothing but the best work. you have to like working on boats to spend the time to make them look so good. nice to see your friends again. thanks for you time. new cat yet?

[@sea4see]

Hello Friend!!! I like to work on the boat... but trust me I prefer to sail sometimes I’m very frustrated to the slow process.... to refit ellös

[@normanboyes4983]

Your are doing an absolutely first class job.😀👍⛵️

[@sea4see]

Thx a lot Norman! I try to do the best I can!!!

[@andrelaviolette7306]

Love butyl for ports, hatches, instruments, always flexible and can be tightened later. Easy removal too.

[@mortensohrt3297]

Super interessant. I have to do the same on my HR45. Have enjoyed your channel - Thanks! See you some day in Denmark 😉

[@sea4see]

Great Morten!!! But remember someone make frames in Denmark too! Thx for watching

[@daviddailey4959]

We miss you big G!

[@sea4see]

Hi David ! I’m quite busy but video will be soon

[@Scramasax]

About that head liner: When the teak deck was renewed on my boat I asked the carpenter to pay extra attention that both sides of the deck are a mirror image of each other (as the old one had some small differences). He asked me back: "Are you sure both sides are similar to begin with?!" Something never had even occured my mind before I must say! Well at least now you need to look very carefully to see a difference, so I'm happy! ;-) That is something you need to be prepared for when working on these old boats. They are hand made, literally! Sealant and installations: I have started to use standard house hold window sealant tape in many places I want to be able to take apart easily in the future. (See the cockpit speaker storm proofing video for example). Actually I did a reinstallation of one cabin window on this boat some five years ago using that tape. No leaks so far and if there will be, it's going to be the easyest repair ever! :-)

[@sea4see]

Hello true I really didn’t notice the difference before job done! But all the boat are different port to starboard .. I leave like that as was originally but what you say is true! Sealant : I used butyl on the W Hatch for that reason easy to remove without destroying the deck! I use a strong bond on.y to the mahogany stripe !!!

[@DonHarden]

Hey, I would like to know how bright the ceiling lights are? the ones in my boat are very weak, almost less than a small candle. I would like to see a video once you get them all wired up and during the night to see how bright they are. the reason I ask is I am looking to replace mine so would like to know how other's work.

[@sea4see]

Don for sure!! Hope soon!!!!

[@brunoubaldini6288]

Che marca di boccaporti hai installato? Sono Lewmar in alluminio, con pannello trasparente in plexiglass? Attualmente ho dei problemi con alcuni dei miei boccaporti Lewmar: trafilano acqua e non so da dove. Credo che il plessiglass lavori (caldo/freddo) nella cornice di alluminio e il sigillante sica nero ormai risulta parzialmente scollato. Prossimamente devo provvedere. Ottimo video, come sempre

[@sea4see]

Ciao Bruno! I boccaporti sono i moonlight danesi.li ho presi da Hallberg-Rassy parts perché hanno un raggio delle curve particolare ovvero 64 contro il 32 di serie ! Comunque se vai sul sito lewmar inglese trovi tutto il necessario per sigillare di nuovo i tuoi dalle guarnizione al plexiglas!!!

[@brunoubaldini6288]

@@sea4see Grazie. Ma il problema non è comprare il plexiglass o le guarnizioni (costi permettendo: sono quasi più care le guarnizioni che l'intero oblò!). Il problema è saperle mettere in opera a regola d'arte. Conosci qualcuno al Nautec o all'Ocean o comunque in zona TS che è capace di fare un lavoro a regola d'arte (in questo momento è tutto bloccato per virus)? Personalmente faccio cose semplici, ma sigillare correttamente la barca non è affatto banale. Per questo guardo attentamente i tuoi lavori e provo un'invidia verde per il tuo 'skillness'. Tu riesci ad andare da Treviso a...non so dove hai il capannone in laguna... per fare i lavori? Cosa racconti ai carabinieri se ti fermano? Io ho lo stesso problema per andare da Trieste a Monfalcone (altro comune, porca miseria)

[@sea4see]

Non non conosco nessuno laggiù. Io ho fatto toccata e fuga al Nautec. Ho comperato Ellös e dopo poco l’ho portato a casa... avrò modo in futuro di conoscere meglio la tua terra

[@brunoubaldini6288]

@@sea4see Avevo equivocato. Credevo che avessi tenuto per un po' la barca a Monfalcone. Solo dopo ho visto i video con il trasporto su camion in capannone nel Veneto. Una curiosità: qual è il significato del nome della barca?

[@sea4see]

bruno ubaldini la barca si chiamava “brontolo” un nome terribile.. io lo chiamata Ellös perché era scritto nel l’etichetta con il numero di serie della barca ed e il luogo dove costruiscono gli HR in Svezia. Ellös al contrario sognifica solle

[@scyz2807]

What happened to the pixelated young ladies? Remember 500,000 subscribers! lol

[@sea4see]

Ah ah... I’m looking for already ask on Tinder and I’m under selection..😜

[@scyz2807]

@@sea4see HaHa I can't wait! : - )