T47 Bottom Brackets | Full Engineering Guide | Everything you need to know

[@blackdoublezero]

serious question/point - Hambini, why don't you/will you ? design a proper workable quality 'standard' for production bottom brackets

[@richardwilliams1728]

To expensive?

[@simonbailey2151]

I don’t think the problem is the standard(s), it’s that the bike industry can’t accurately build frames to them.

[@blackdoublezero]

@@richardwilliams1728 a can of coke is not too expensive & the engineering & manufacturing tolerance that goes into a ring pull is immense - our hairdresser jockey can do this

[@richardwilliams1728]

@@blackdoublezero every frame is different though so it would mean building a custom BB for each frame.

[@redhel]

@@blackdoublezero okay google, what is an economy of scale??

[@WowRixter]

I love my Hambni T47 bottom bracket. My LBS that installed it when building my bike said it was the smoothest BB he's ever seen

[@simonacker]

I love that newer Cannondale models are now going to be spec'ing T47. They basically pioneered press fit BBs via BB30, and now they're going back to threaded after flipping the industry on its head. Ultimate troll move lol.

[@danwebber9494]

“Cannondale quotient” is our universal term for how many proprietary things are on any given bike. It’s a huge pain in the ass.

[@chrishoyt7548]

Ah, yes, the world does need a Hambini standard. There's no question about that. Nice technical pointing with the high precision mech pencil. Regards, Chris

[@JimUe1]

RIP pen check

[@HoshinoMirai]

The other day I saw someone defending manufacturers going back to threaded by saying that it's good for everyone because "It is hard to get the tolerance right for a press-fit BB, so by going threaded we can get rid of the problems (i.e. creaking) of press-fit BB". I just can't believe that they think the bike companies who sell them 5000 usd frames that somehow can't get the manufacturing tolerances right for a, quoting hambini, "a round hole" can provide them anything of true quality. What I don't like isn't about all the stiffness talks or anything. I am just furious that the bike companies are getting away with putting out inferior products but still charging you the same price, all while talk about how amazing their manufacturing process is, and the fact that people are accepting this.

[@sbccbc7471]

One of the only good things I see about returning to threaded BB standards is installation and removal uses the same tool. No pullers and presses required (except if you're servicing it).

[@harveybrooks2597]

This is the problem now, anytime I purchase a new bike I'm thinking "Okay, whats going to go wrong on this?" because quality control and development of these products is awful.

[@truantray]

Basically manufacturing that relies entirely on Teflon plumbing tape. And the industry wonders why they are in free fall.

[@josephphillips865]

I feel that using carbon fiber is a major disadvantage if you need tight dimensional tolerances, especially when said industry spends more on marketing than engineering or manufacturing and does not have the same resources as the bigger players such as the aerospace industry. If you ask any decent frame builder to make a frame from steel or titanium with a press fit bottom bracket there is a good chance you will get better tolerances for less money than say the best carbon frames and without many of the problems such as those aluminum inserts debonding from the carbon. Of course none of the roadies or weight weenies would be very keen to ride a heavier bike with a rounder hole.

[@glennoc8585]

@@sbccbc7471 campy entered the chat

[@bobqzzi]

Love these videos explaining the standards. My take, fwiw: given the actual manufacturing standards in the bike industry, a BSA 68 with 24mm axle makes, by far, the most sense.

[@Derrrrrp]

Wrong. Those teeny tiny bottom brackets aren’t big enough to route internal hydraulic hoses, but nice try Fred

[@Mapdec]

Top work. There is some humorous irony that the reason pressfit has developed its poor reputation is because of the Hambini channel. We have been rapidly buying tools for the increased number of T47 we are seeing that need facing after lazy paint jobs. T47 isn’t the answer, more educated mechanics and consumes are! The main advantage is that T47 will be easier for mechanics to fix post production, until they corrode away anyway. Saying that, I have only seen 1 bonded in BSA fail because of corrosion and that is a tiny fraction of the pressfit problems we fix.

[@Hambini]

One of the things I have seen first hand is the large amount of consumers going back to their retailers and claiming faulty goods under the consumer rights act. I'd imagine that this has filtered up through to the bike manufacturers who are unhappy at the high level of returns as it costs them a lot of money. Give it time, I think there will be more bond failures - it's inevitable in damp northern england.

[@Mapdec]

@@Hambini For sure. Frame reports for warranty claims are a notable part of our work now.

[@cjohnson3836]

@RollinRat I've been willing to slide on some red lines (cough...internal routing...) but I will never buy a bike that isn't BSA. Not for the least of reasons, I have to do my own maintenance.

[@kevinfrost1579]

@mapdec Agree T47 isn’t the answer nor any other solution the manufacturers may present until they opt to put their hands in their pocket and simply manufacture basic stuff properly. Press fit issues solutions identified years ago just a few dollars manufacturing cost per frame to resolve (basic as making a round hole opposite another). Now we have them driving us down the route of bonded alloy BB sleeves and galvanic issues. Colnago learnt that lesson 20+ years ago and very quickly resolved it by using Ti sleeve instead - no issues thereafter. But fat chance of that happening in the majority of the manufacturers as they knowingly design problems into products for inbuilt obsolescence . See the last 5 years on multiple issues. Suspect we have the next ‘walk of shame’ by the manufacturers lined up in plain sight. Deep breaths 🙄

[@mtbzen]

@RollinRat (leaving a note for myself. I enjoyed the story - especially what your dad and grandad instilled in you. I do the same - “diy so you know…” for my vehicles (LandCruisers). I trusted a “reputable” shop because I was busy and figured they had a good reputation, and they made a mess. Never again. Anyhow, thanks for sharing).

[@FuquarProductions]

I am not into cycling at all, however I always watch for all the engineering knowledge.

[@hawkeyelikesbikes]

I've been running BSA30 bottom brackets without any issue for over 40,000km between 2014 and September last year when the bike's replacement arrived. Most of that on the same set of bearings, which remained smooth. Setup was Rotor 3D+ cranks and Power2Max power meter on a Cannondale CAAD9 that had a BSA BB sleeve fitted by the OEM to accept Ultegra cranks. I would happily use that setup again.

[@BlackWaterCyclist]

The big advantage of the t47 86 for custom frames like mine is that I can clear larger tires with a shorter chainstay since there is more frame material to attach the chainstays to. For road applications, I see the benefits of the 68. Also with the 68, you can put the t47 86 in them to run the older style bb30 cranks.

[@jeffbrunton3291]

I’ve had BB30 with its aluminium sleeve for 10+ years and never had any issues, so hopefully the sleeve in T47 will not be a problem

[@davidnicholson6680]

Perhaps we're premature in ditching press fit. It seems like bike manufacturers have moved to T47 just when they had finally implemented processes that allow them to properly do press fit. Based on the opinions of the mechanics I know and what I've seen anecdotally, far fewer people are bringing in 2018-2022 bikes with creaking press fit BBs then there were ten years ago. Also BB86 has always been less problematic than other press fit standards, unsurprisingly that's the standard that both Giant and Canyon have stuck with.

[@harveybrooks2597]

Please don't, just let press fit die.

[@borano2031]

Correct. The least amount of parts will bring you the best solution. It´s up to the producers to meet the standards, or tolerances. Rgr

[@cjohnson3836]

Replace press fit with BSA and we're in agreement. Easy to service. Worked for decades. There's zero reason to be fucking with the rest of the bullshit.

[@cthulpiss]

PF execution was BAD on average (in terms of median bikes) Threaded all the way!

[@sebastianm2381]

But isn't a Press Fit interface inevitably going to wear out until it will be out of tolerance? You use a threaded interface as often as you like. And most of the time, changing groupsets or groupset generations will require you to put in another BB into your frame. How often can you do this with Press Fit? I put the 4th BB into my carbon Ridley frame. It was much slacker than in the beginning. I had to use a liberal amount of Loctite to get it to fit snugly.

[@RK-kn1ud]

Look at all those standards! That's the great thing about standards...there's just so many to choose from!

[@bazanderson8283]

truth bombs from Hambini as per, got to let my LBS know about u, thanks for all the info you put to us non-engineering types and thus empowering us when it comes to bike mechanics 🙏❤👊

[@alexandra4334]

Dub BSA has worked fine last 3 years on my trail and gravel bikes with a fair amount of abuse. Neither bike came with DUB I upgraded from cartridge on a Cannondale on one and from GXP on a Specialized on another. I do periodically disassemble and inspect the bearings and cups and have replaced one or both cups if the bearings feel gritty at all. The basic bsa dub bb is fairly inexpensive to keep spares and replace considering replacement is rare. The seals are pretty effective just gotta be careful with the little blue o rings on the sleeve. No creak or noise has has been from the BB on either bike.

[@ThePaulKat]

In the 90's Colnago frames suffered intermittently from Galvanic corrosion in relation to the threaded bb insert. They fixed this by bonding in titanium inserts instead. A few years later they reverted back to aluminium and never suffered a relapse the aforementioned corrosion.Colnago ( like Pinarello I believe) have always used a threaded bb and don't suffer from galvanic corrosion or de-bonding on the bb interface so it must be doable to do this reliably.

[@interceptor7905]

​@RollinRat Exactly,spot on!

[@fwzikrm]

I just realized why my four year old doesn’t object when I change the youtube channel to watch your videos….it is the disney blanket on the table that keeps the interest. (FYI- I do turn on captions and mute audio on the more profane videos). How come you haven’t been sued by Disney yet? Better be prepped in advance , b/c if the that blanket goes away…it is going to break some hearts 😉😉😉

[@kevinfrost1579]

@Hambini great vid very helpful and to say if they keep moving the goalposts there’s no need to face the core problems . Keep shining the spotlight thanks

[@АнтониоРодригес-ф4т]

I have 2 bikes, one with bsa bb and the other with a PF 68mm not a single problem whatsoever! Both are great

[@josephklosinski3189]

My bike shop had a 10 or 15 year old Felt that came in with a debonded bb cup. Hopefully, resins/manufacturing has improved since to make this issue obscure

[@TheMerckxProject]

I think everyone who's been paying attention has been expecting the Pressfit 'standard' to end. And the surest sign I had was when I found a Pressfit press tool on a US website...for $20. Once the tools become aftermarket and cheap, the industry is definitely done with whatever system they "used" to be in love with.

[@BrianMcDonald]

I did a new bike build with the T47A (bbright etc) and it performs fine but was a bit annoying installing it because you need two different tools and as you said, you need perfect tool alignment to get proper engagement with that 2mm while not scratching the frame.

[@PanSkrzetuski]

Thanks for this great information, Hambini. Having built a couple bikes for myself, figuring out bottom bracket/axle/groupset compatibility is a royal pain.

[@mattmatthews5414]

I’m 98% into the square taper, friction shift, rim brake “everyday” bikes, but this marketing gains racing stuff is really interesting. Pretty unbelievable that they’re only finally getting around to putting the bearings back into the frame instead of continuing on hanging them out like testicles.

[@dosgos]

So many "standards" must make it difficult to repair and reuse older bits. This must generate a lot of sales.

[@carlmons]

The solution to both galvanic corrosion and bonding failure with aluminum (especially with carbon) is anodizing without sealing or dyeing, just before bonding to any other material. It's really the only solution long term. It both increases adhesive bond strength regardless of surface texture, and electrically insulates aluminum from any chance of galvanic reaction. I find starting with a smooth, even polished surface before anodizing provides the best insulation and bond. It's such an inexpensive process, it baffles me that every aluminum bike part isn't anodized.

[@jeffakalucas]

My Trek came with a T47 for Shimano which was a Praxis T47-IB (85.5 inboard bearing) which require a Trek specific tool to install. The tool made for a better fit without damaging the frame. When the Praxis BB wore out, I replaced with one from Wheels MFG. This required a different T47 tool as the outside notches were different. Then I replaced with a Chris King T47 which required yet another T47 tool as the outside notches were different. However, Chris King T47 + Sram Dub AXS Red = :)

[@GrahamB29]

I've been using a 30mm axle Lightning axle in BSA68 since 2008, plus another version in BSA73 from a few years later. There has been no issue with debonding, mis-alignment or other ills. Guess I got lucky, with both the Cervelo R3SL and the unbranded Chinese MTB frame. Lightning supplied the outboard bearing holders with a fine cross-hatch and a piece of 3mm rubber: the idea was to tighten the bearings by hand, hence avoiding over-stressing the bearing holders. That seemed to work just fine (although getting them out usually required some careful use of multigrips). There were other issues: using low strength loctite on the center-bolt to avoid it backing off during a ride, and the slightly hair raising method of breaking it loose. Real design issues, but not related to the bearing carriers. Changing bearings was so easy, just put the carriers in the oven, wait 15 minutes and the bearings simply fell out. Since I was young(er) and stupid(er), I used various cheap ceramic and hybrid ceramic bearings which didn't all last so well, but that was user error. In fact though, the all-time short-life champions were the no-contact NTN's I put in mid 2022, followed by riding through a flooded road during a rain storm in France. The effect of temperature difference was pretty obvious, it pulled water into the sealed sleave and removed all the bearing grease on the way. One more ride and they were rattling, so I filled them with grease, rode a couple more times and put the bikes in boxes to move to Adelaide. They didn't last too long after arrival, but they have some regular-seal NTN's now and all seems well. It's now bike n°2, behind the Winspace SLC, with the annoying PF86 BB that a certain English marketing guy called "stupid" before being hired... It still gets ridden enough, even though I'm now retired thanks to Covid, and my FTP is about half that of a current pro of my weight...

[@philoso377]

One way to avoid BB tilt/yaw deviation from crank axis is to couple the first half BB to the crank shaft just before BB thread into the BB shell and finger tight it first. Follow by the second half BB in the like manner. Once all pieces are pre aligned, we can tighten the BB together by finger then apply torque tool to finish it. This way the bearings axis and the crank axis will be complementing each other during and after the installation.

[@torXblog]

Занимаюсь проектированием велосипедных рам и вижу большой потенциал в Т47i. В частности рекомендуем их для титановых проектов, так как прессфит в титане сделать дороже. Однако история с инструментом для монтажа такой каретки действительна актуальна. Используем его, поджимая прессом

[@revhpstinkerpinker]

Pinarello never stopped having threaded BBs. My Pinarello bottom bracket area got gobbled by galvanic corrosion within 18 months and had to be warrantied. Then the same happened to the replacement. I do have exceptionally acidic sweat though ... .for non-freaks I wouldn't expect galvanic corrosion to trash the BB until just after the stingy two-year warranty has expired.

[@revhpstinkerpinker]

Would Ti be a better option than Al? It doesn't corrode, therefore avoiding galvanic corrosion and it won't de-bond either ... as I can testify after leaving a carbon seatpost in a Titanium frame for too long - they weld themselves without the need for a bonding agent. Some boutique brands recognize the issue and put their use of Ti inserts on their marketing. When I'm paying in excess of £3k for a frame, I wouldn't mind paying an extra £100 for a Ti BB to extend the lifespan beyond two years.

[@robincooney1263]

So we've come full circle. Trek, Cannondale and others had big problems glueing alloy inserts into their carbon frames for BSA - before they went to press fit. I suggest they will now have exactly the same problems with T47 - as per your list in this video. Getting a metal frame gets rid of most of those issues, however. Anyone doing titanium frames with T47 yet?

[@EpicEvolution]

You can find custom titanium builds at least

[@maxgrass8134]

Notable to mentioned that shimano does not yet make a t47 24mm BB, however SRAM does make (sell) T47 Dub BBs.

[@szurketaltos2693]

Shimano in general has great design but they really seem to be falling behind in terms of this basic stuff. I suspect that SRAM has a much more agile development process.

[@Gregory_tottie]

That video was downright mature. You’re growing up.

[@tomkunich9401]

My steel Tommasini doesn't have any voids at all. Even though I get dirty water on the bottom bracket, I don't have galvanic corrosion problems. I also don't worry about a carbon fiber frame breaking under me. I must say that I am paying the price. My Tomassini Fire with a steel fork does weigh 1/2 lb. more than my Trek Emonda did.

[@SenorSiesta]

Would be really interesting to hear your thoughts on bearing size/diameter and how that affects performance and if it does at all?

[@n0ch91c3s]

As in the size of the balls themselves? I can tell you that, all else being equal, a larger ball has greater load handling capability, is less sensitive to grease viscosity, and is less prone to damage from contamination. It's like a bigger wheel going over a rock vs getting completely stopped by it and then skidding. Ideally the bigger bearing then pulverizes the debris.

[@Manetty6]

12:40 you can avoid water getting into the threads: ptfe tape the cups.

[@stephenturner7512]

Unless I missed something, I had read that one of the original design aims of T47 was to allow for a larger bottom bracket area to facilitate greater welding surface, especially for boutique ti manufacturers. Yes/no?

[@Hambini]

I can't see why it would make a difference against BSA

[@danchambers1350]

T47 (typically a 50-52mm OD BB shell) helps larger diameter tubes to be welded on without joint overlaps. Welding a 50+mm aluminium downtube, a 45mm steel or Ti one onto a 41mm OD BB shell can be done with some fudging, but essentially the BSA 41mm OD BB shell evolved to live with 'classic' 28.6mm and 31.8mm OD steel tubes. The larger diameter of the T47 BB shell also increases the available offset for the downtube and chainstays from the axle centreline. Again helping reduce weld overlap and increasing weld access. The longer T47 x 86.5 and 91.5 internal bearing shells do allow a wider spacing of the chainstay welds, aiding tyre clearance, increasing weld access and reducing joint overlaps. As Mr. H shows, there are other issues in play with carbon frames.

[@thomaslowry7813]

In the mtb context (take the design of the Fairlight Holt for example), my understanding is the extra real estate gives the builder flexibility to also attach the ST further forward on the shell which can increase tire clearance without having to bend the ST to create it (this is nice for aesthetics, for manufacturing simplicity/speed, and also dropper posts).

[@devdroid9606]

You can't just look at the BB. You must also consider what is happening in the frame building process. New innovations in bonding agents may overcome problems of thermal expansion or galvanic corrosion. Also, the frames may be made using mandrels or other improvements that reduce the alignment problems or improve the threaded BB reliability over time. We may even see a comeback of lugged carbon frames made using 3d printed or other kinds of lugs, perhaps even threaded metal. Lemond has apparently developed some significant improvements in CF manufacturing that increases reliability, while at the same time reduces costs.

[@rewind9536]

Hope Stainless BSA30 still going strong, since January 2020. 1000 days of commuting, 5km one way, 120m inclination, downhill and up again, 110kg rider weight. Banshee Paradox V3 hardtail. Considering getting NTN bearings.

[@bowrepublik]

I run the brand 15Sixteen we make ti gravel bikes and there is an noticable difference in stiffness from BSA 68 to T47 in the bottom bracket area. I'm no engineer so wont dive on the specifics on the two bb's items but we do prefer the T47 from a stiffness point of view. When it comes to weight its nearly negligible one has a smaller bb shell and longer tubes and the other is a larger bb shell and smaller tubes. when welding its also easier to maintain square on the larger area. as well as less heat drive in a smaller area. Time will tell on the longevity of the bb though. The frame will last for ever.

[@raularrese3926]

Hambo , My favorite only cause i pick them up cheap is FSA 386 EVO , It comes in 24mm shaft and uses shimano type end play adjustment " basically no shims" ... i have gotten it to fit into every type frame width .

[@dmlopezleon]

Buen video, ¿porque no utilizan titanio para hacer las inserciones del T47 en los cuadros de carbono, y así se podría evitar la corrosión galvánica?

[@dmbambino]

All this driven by the belief that a bipedal mammal, that can barely crank out 1/10th of a horsepower, will see a benefit from a 30mm axle vs one that’s 24 or 25 mm.

[@moritzaufenanger2537]

Well, to be fair, on Metal Frames T47 does leave a lot more room for internal routing, so thats another point to take into consideration.

[@tednruth453]

Your average Tour level pro can ride at 360w for an hour and sprint at 1500w....a bit more than 1/10th hp......does that change things?

[@tobycolin6271]

Us fat boys have lots of torque and Power and shimano hollowtech has always coped. Shame the bonded cranks don’t stand up to 500+ watts at 60 rpm. Maybe that’s why the media want you to ride 160mm cranks and spin at 120rpm

[@cjohnson3836]

@@tednruth453 I couldn't give two fucks what all of 200 people on the planet can do. The fuck does this have to do with the price of tea in China?

[@brankododig1585]

Mind you, the instantenous torque can be in car territory. That's a big part of the reason frames eventually fatigue and die - metal ones, too.

[@kollegekool]

You manly made the case for Carbon Frames, what's your take on threaded BBs for (custom) Ti Frames ( or for that matter also Al and Steel )?

[@dimm__]

*turn on notifications for this post*

[@burrussw]

excellent as usual, very informative, thanks

[@benc8386]

Great video thanks. I don't really buy into the marketing that we need the extra stiffness of a 30mm axle but the T47i standard should make it easier to create frames with ridiculous tyre clearance without horrible kludges like dropped chainstays.

[@peterahlstedt2043]

Thanks for great video and information, its no doubt that T47 is better choice with 30 mm axle.

[@tychoMX]

Question: on a more generic view, if we stuck to steel, 24 mm axles, would many of these bearing/clearance/tolerance issues improve? I haven't bought a crankset in a couple of years but I deliberately avoided a 30 mm axle on my last build because all the compatible BBs seemed like they were bodging a larger axle where there is no reasonable way to do it - either undersized bearings, very thin walls, low tool engagement or a combination thereof. I also don't like aluminium axle faces rubbing on the steel bearings, but that's just me.

[@TypeVertigo]

The only real advantage a 30 mm aluminum crank spindle has over a 24 mm steel one is light weight. Actually getting it to work on a bicycle and its bearings though is a whole 'nother story, and you've pretty much enumerated all the arguments for steel/against aluminum. Shimano has rightly taken flak for their bonded crank arms coming apart, but their core Hollowtech II crank spindle design is pretty darn solid. For best results one could just stick with a 105 R7000 crank, or one of the non-series units (FC-R510, FC-R520) if weight isn't as much of a concern.

[@willo7979]

@@TypeVertigo “30mm aluminium spindle is lighter’. That’s the marketing front. Manufacturers love aluminium spindle because it’s easier to machine and easier to form, more or less, to a similar weight as a shimano 24mm spindle. Look around, there’s no single manufacturer makes 24mm spindle as light as shimano, including Rotor 24mm Aldhu track spindle (there should be someone weighing Aldhu spindle on yt)

[@binitbob]

Great explanation and very succinctly explained thank you.

[@shaunyeo3349]

Neck breaking hello hambini today!!

[@jameskellogg1162]

My bike that I ride most often is a Cannondale Super Six with Sram Red and it has been a great bike but I have replaced the bottom bracket a couple of times . I do ride my 1995 Klein Quantum Pro with Durace group and the amazing thing is , I can pop the chain of the Klein and the bottom bracket spins like the day I got it . I know Gary Klein was a MIT graduate and he definitely made some great bikes I currently own five Kleins both rode and mountain and they all have pressed fit bottom brackets and still spin perfectly . I'm not a engineering expert bye any means , so is the reason for exstronary longevity with great performance because of the bottom bracket shell being very straight and round or something else . I would love to hear what you think Hambini the great

[@themeatpopsicle]

I can already hear thousands of Chris King fans screeching wildly

[@josephphillips865]

Chris King buzz intensifies.

[@kimrice394]

😂

[@dusty_hoods]

Always waiting for this "hello!!!"

[@wazirtan6801]

im am lucky i got a got a good right bike with bb 386evo,only thing gear shitting wasnt smooth enough maybe due internal cable routing,that enough bike for me no more new bike,thanks for the video👍

[@naf2579]

On my steel builds I requested a 68mm shell and t47i BB. Cups only with no sleeve. Can fit SRAM exogram short spindle bb30 cranks or standard t47 cups to use a gxp spindle.

[@JBR.1974]

another very informative video....thanks...have to wonder why the bike world doesnt come to some agreement on a fully standardised fit...at least from some point....has be cost benefits as well as making it better in general

[@davewallace9048]

What is your opinion on Chris king bottom brackets? Lifetime warranty also.

[@Hambini]

Personally, I think it's misleading. here's their warranty chrisking.com/pages/king-lifetime-warranty I draw your attention to the line "This Limited Warranty does not cover ... and normal wear and tear. " So in essence, when the bearings wear out you will be purchasing new ones. When the threads wear out over time, it won't be covered... The customer is led to believe it's one purchase for life and that's it. From their terms it does not seem to reflect that.

[@gungadinn]

Back to the integrated headset verses the no thread headset. Industry head sets, we've had 1" steering tubes, 1-1/4", then 1-1/2". Unless you're a down hiller, you don't need a sewer pipe for a steering tube. All is good though as I own 4 titanium bikes and will never have a need to purchase a new bike that will be obsolete once the trend of today changes to some new wizzbang must have new standard.

[@Khalid-he6wt]

Nice video big thanks Hambini

[@jayadams2771]

I want you to review some of those garden tools.

[@edic2619]

Hambini. Great video. Thanks.

[@fastestmilkman3840]

Still using a BB90, your favorite.😆

[@allenjay896]

Ever thought of reviewing the elves falath pro framset? 🤔

[@10ktube]

So out of the existing BBs, past or present, and assuming manufacturing stays how it is now, what's "best" for the average Joe to want on his bike? Part 2, if you made a new standard, and it was made to tight standards, as were the frames, what would it be? Curious if they'd be the same or not. Also curious if they'd come with a complimentary pen.

[@janeblogs324]

BSA. Easy to work on, spare parts cheap and available as well as counterfeit options. Even a 16mm axle is stiff enough for 99% of riders, you don't need 24 or 30mm unless you actual race crits

[@apair4002]

@@janeblogs324 True. The best part of threaded bb, it is recyclable. This is my experience on cfrp and my thought about it. It is easy to follow tolerance for metal product, however the cfrp is not the case. In average, the smallest tolerance for cfrp that we can get fresh out of the the mold is +0.03mm and above. So we need to machine the pf bottom shell to accurate size. 1) In my experience dealing with aerospace cfrp, once you machine the cfrp layer, it will damage the integrity cfrp itself and it getting worse by put stress on it. 2) Cfrp is not favorable for continuos, 24/7 stress (pf) + cyclic loading. 30 to 40% of it is polymer (plastic), prone to be scuff during installation. 3) For short time use in race, yes pf bb on cfrp can work flawlessly. For longevity and daily usage, pf is not ideal. 4) When you deal with pf, you don't know how tight is tight. My friend's frame, pf b.shell worn out after 2 years. Mine bb68 still strong and it is objectively tighten at 45nm. 5) Threaded bb, easy maintenance and recyclable. We can reuse the bb. Just take out worn bearings but using heat gun then put it back by using heat gun. The bearings slide in and out like butter (heat the bb, not the bearings). 3 times me recycle bb68 & receives new performance bearings. 6) The bearings can be replaced, so the cost is cheap. You need only the performance bearings, cost you 50usd. Conclusion, I will choose bb system with easy installation, objectively tighten at 45nm, easy maintenance, no damage to bb shell, low cost and recyclable.

[@SethJayson]

Serious question: Do any of the manufacturers pre-wrap knurled their aluminum inserts before bonding them into the CF? Or is that layer of bonding glue considered sufficient? When I build my home-builds, I wrap CF around the BBs (not just gluing in, but wet layup with compression around the BB shell, so I do not get voids as they do just gluing in...) but before I do that, I layer 2 or 3x layers of fiberglass over the shell to provide a layer of insulation between the alloy and the CF. At that point, my biggest worry visavis debonding is the potential to thermal shock and the big differences in expansion between the aluminum and the CF composite. (I'm too cheap to avoid those issues by buying Ti shells).

[@markhagen7777]

What does time do for their bottom bracket standard

[@Hambini]

BB386 EVO pressfit.

[@PaoloLuraschi]

Do you have measurements or analysis of the stiffness of square taper shaft vs. the different hollow shaft BB standards ? How much this affects performances when you factor in the finite stiffness of the frame ?

[@liszt1967]

What's the role of patents in this? Will Shimano's 24mm patent expire at some point, and then everyone will go back to that bc it's the best? Also, is Rotor's 24mm solution possibly even better by applying the BB30 preload method to 24mm axle?

[@davidngqkalone88]

pretty sure theres no patent on 24mm axles, or if there is it would have long expired.

[@Shirt-x3s]

Shimano had patents on the HT2 preload/fastening arrangement (US6755095 etc) which expired only about a year ago. But it's not because of patents that other manufacturers are pursuing 29/30mm axles, it's because an aluminium axle needs to be bigger to match the strength of a steel one.

[@sri10291]

What is the thread specification exactly? If I have to tap an insert to fit a T47 bottom bracket, what would be the major and minor diameters of the thread and the thread profile?

[@donoldduckben]

Just curious, bsa and t47 are both bonded to carbon frame, so theyre probably equally susceptible to galvanic corrosion or bonding issues right ? Seems to me that bb386 is still the best standard because they accommodate both 24 and 30mm axles, shame not that many frames use this standard, I know BH and the earlier Merida scultura use that standard

[@apair4002]

The question is, nowadays, how many you see disbonded / bonding issue on threaded bb shell? I never see one fail regarding disbonded cheap cfrp with threaded bb. I am my self got one cheap frame on the shelf. Even it is cheap frame, shite material & quality but threaded bb in it work flawlessly. Here is why I choose threaded bb. In average, the smallest tolerance for cfrp that we can get fresh out of the the mold is +/-0.03mm. Need to make it small diameter then machine the pf bottom shell to accurate size. 1) In my experience dealing with Class A aerospace/advance cfrp material & process, once you machine the cfrp layer, it will damage the integrity cfrp itself and it getting worse by put stress on it. 2) Cfrp is not favorable for continuos stress + cyclic loading. 30 to 40% of it is polymer (plastic), prone to be scuff during installation. 3) For short time use in race, yes pf bb on cfrp can work flawlessly. For longevity and daily usage, pf is not ideal. 4) When you deal with pf, you don't know how tight is tight. My friend's frame, pf b.shell worn out after 2 years. Mine bb68 still strong and it is objectively tighten at 45nm. 5) Threaded bb, easy maintenance and recycleable. We can reuse the bb. Just take out worn bearings but using heat gun then put it back by using heat gun. The bearings slide in and out like butter (heat the bb, not the bearings). 3 times my recycle bb68 receives new performance bearings. 6) The bearings can be replaced, so the cost is cheap. You need only the performance bearings, cost you 50usd. Conclusion, I will choose bb system with easy installation, easy maintenance, no damage to bb shell, lower cost and recycleable. It

[@justpedal65]

Great stuff! After watching some of your vids, I get the consensus that this is primarily an issue with carbon frames and bonded sleeves. How about small lot production of Ti frames from a moderately sized bike shop brand? Haro's Masi... to be specific. Their Incanto Ti frameset is PF. Let's face it... its name only. It will not be Faliero or even Alberto craftsmanship, but I'm pretty confident they will be aligned and circular, leading to a creak free life. Worth the gamble?

[@Phaidrus]

Are you sure the bearings in a Hollowtech II Shimano BB are 6805 (e.g. SKF 61805)? That would mean 25mm bore diameter while the Shimano spindle is 24mm.

[@Stevenv74]

Just a little question what do you think about hope BB.

[@KM-jo3wh]

Thank you for another great vid. Have you or some other party done a quality testing of e.g. crank spindle stiffness? I'm not interested in showing that an 30mm spindle is stiffer than 24mm, but something that comes down to if it really matters or not. For example, I've been trying to look at what track riders use when they appear on Eurosport, and to me some are still using square taper axles/cranks! Briefly put, If I'm correct in that, then to me the whole 30mm standard at least seems completely unnecessary performance-wise, and is therefore a marketing driven standard. And yes, I am aware that there are many other points of contact that would need to be taken into account when measuring something like deflection in the "crank area", but that's my point, has somebody done such a thing and tried to really isolate things to see what really matters/is sufficient in that area - spindle being one?

[@marcinbujar1872]

Can you please advise which is better for a titanium frame with Ultegra Di2, BSA threaded BB shell or T47 treaded BB shell? Is it worthy to "upgrade" for T47 BB shell when selecting titanium frame?

[@MrSupermugen]

curious why brands, such as giant Still use Pressfit? The brand new Reign thats just came out still uses PF bottom brackets - i've owned a few giants with PF and they've never given any issues.

[@DenCoDave]

I am looking at a bike frame that specs "BB: BBT-47." Is this the same as "BBrighT-47 Bottom Bracket?" I want to run SRAM DUB in their 'Wide chainline crankset' for a gravel bike. Is this setup like your 'Hambini Racing T47A T47-77 BBrighT-47 Bottom Bracket SRAM DUB Crankset' line? SRAM specs T47 (85.5), T47 (Road and Road Wide) 68mm, T47 (Road and Road Wide) 77mm, T47 (Road Wide: 85.5mm), T47 (Road: 85.5mm). How do I determine the width I need and find out if you have it in your line? Is it likely Hambini Racing T47i T47-86.5 Bottom Bracket SRAM DUB? Or, do I need a number direct from manufacturer on the crank-crank width? If there weren't so many BBs I would ask much fewer questions!

[@basvanleeuwen4502]

If I put a T47 or any threaded bottom bracket in a titanium frame, is galvanic corrosion a problem? And what is best to stop it, copper/copaslip, anti seize/assembly paste, or bearing grease?

[@laurikuris7721]

GXP or DUB for BSA? what would be better?

[@bikernaut1]

Hi! What do you think is the best BB standard if you would design it? Would it be different for aluminium vs carbon frame? Do you believe aluminium spindle is better because there is no possibility of galvanization or do you prefer steel spindle? Whould you have different designed BBs for 24mm vs 30mm spindle? Thank you

[@rewind9536]

No mention of 73mm wide frames. Only 68mm, and then the mega wide 86mm with nothing to hold on to. Do I have to buy Hope T47 BB to use T47 on 73mm frames or does Hambini BBs work on 73mm wide frames?

[@cjohnson3836]

Just going to keep using the BSA that has forked for years without a problem, that I already have tools for. Never had a problem with a BSA BB. Never had a problem with 24mm axle. Never had a problem with a metal bike. Unless you're one of roughly 200 individuals lining up for an over-hyped French group ride, your watts are irrelevant.

[@jamesd5241]

Can a giant tcr press it be turned into a threaded BB?

[@adamabbas8876]

If you were building a custom bike. Would you spec a t47 BB? I've always used bsa and avoided sram 30mm axles.

[@dianam3288]

I’m having an issue with my Colnago V3rs BB. I have Sram DUB power meter. My bike shop ordered a T-45 ceramic speed. It fits perfect but when they tighten the preload, it stops spinning freely. If they don’t tighten it enough, there is play in the cranks. What’s going on? They also installed a new preload adjuster. They have to put enough spacers on the drive side so the spindle doesn’t hit the screws of the front derailer. Will wavy washers help? Any recommendations and help would be appreciated. Thanks for your great videos!

[@loonation2185]

Hello hambini, just a random question, what are youre thoughts on the good ol square tapered bottom brackets?

[@Hambini]

noting wrong with them

[@vinnychoff]

@@Hambini and Loonation. I have one on my Simoncini cycle its12 years old. Only one fitted since ownership. The orginal campagnolo failed after a couple of years. Mayvbe the local bike shop did not fit it correctly. For me it Works fine.

[@Wiroe]

Are you making bb’s for dub wide cranks? Would love one for my Scott Spark when my sram bb is done

[@RyonBeachner]

Likely an unpopular opinion, but I’d rather a technically inferior BB design that is more easily repeatable for the manufacturers who have demonstrated an inability to control the relevant tolerances. I’m inclined to think this way as the performance of an acceptable T47 BB implementation will perform better than all the fucked up press fits. I wholly acknowledge that PF bottom brackets can be ‘repaired’, but most consumers are ignorant to that fact, or unwilling/unable. However to be fair, the consumer shouldn’t be responsible for QC and corrective action. I have a T47 bottom bracket on a gravel bike that had galled threads despite a thorough greasing. Thankfully the manufacturer was willing to simply send me another frame, but I don’t anticipate that will be how the industry handles this moving forward. All that said, the disbonding/corrosion issues can be avoided, I think this may result in a better quality of life for the consumer. However I remain cautiously skeptical.

[@daveallenwex1962]

Any suggestion on an "unthreaded bb" set to fit to a trek madone with thread damage to left side on T47 type threaded shell. I need Sram bearing type if possible ... I know the product exists but that's it. Any help appreciated. Rethread tools are hugely expensive and no local shops have them. Regards

[@richards4422]

So is a press-fit bottom bracket on a TIME bike the superior option ?

[@MAEBikr]

Perhaps a dump question but the wall thickness of the threaded sections of the T47 seems excessive - could you increase the sleeve diameter slightly to get rid of some of that material - I know the sleeve would of course then weight a little more?

[@Hambini]

Yes you could but it would reduce space for cables

[@MAEBikr]

@@Hambini I have an idea - let's run them on the outside of the frame!

[@mark-1234]

The amount of different BBs out there is too much for me to keep up with so gonna ask here. A gal I go riding with has a 2016 Giant Liv Avail with a DuraAce crank and she's got the BB creak. I replaced it some months ago (I don't remember the part number and the box is at the shop), adding blue Loctite, but she's capable of some decent wattage so it started creaking again. Is there a manufacturer that makes a threaded one or do I have to have a custom one made?

[@ME-hr8dl]

Was thinking of upgrading my 68 square taper to Hollowtech and have been advised that the frame would need re-facing at the bottom bracket. Is this really necessary? It’s a 2012 giant defy…

[@AlessandroLandra]

I think colnago was using a prior version to T47 which came out about the same time Chris king did. What is the name of the one they use on C64 and V3rs? T45? What is the difference?

[@simonbailey2151]

I don’t get why they’re so hung up on bottom bracket stiffness; Tom Boonen won Paris Roubaix on square-taper campy cranks, ffs

[@lunatiy]

d*** measuring contest, average rider wouldn't notice the difference

[@harveybrooks2597]

Seeing who can get the stiffest axle.

[@Hambini]

Quite a lot of deflection comes in the bearing and the connection joints. You are more likely to feel deflection in the pedal than the BB for example because the bearings are small.

[@simonbailey2151]

@@Hambini do hairdressers prefer a smaller bearing, or a stiffer axle? That’s the question that needs answering on this channel

[@Hambini]

@@simonbailey2151 mine likes stiffer axle....

[@ryansuchodolski68]

Hey Hambini. Love all your videos. QUESTION…I have a Pinarello Dogma F12. What are your thoughts on their BB? I really appreciate your time. Thank you

[@benhoadley4394]

Theirs is ITA standard which is very similar to BSA. It doesn't have the reverse threaded one side, which could in theory, undo itself. They never do though

[@ryansuchodolski68]

Thanks Ben. Cheers

[@KoenMiseur]

So is a T47 better or worse than a pressfit (in a mass manufacturing point of view)?

[@TRAILSURVIVOR]

HI THERE! I have aDogma F10 with italian bsa.There is a t47 internal with italian threaded?

[@peteracain]

@hambini I assume t47 thread established directly in titanium frame shouldn't face these problems?

[@Hambini]

You will still get galvanic corrosion

[@geoffreycrawley3985]

@@Hambini How can there be galvanic corrosion in a welded titanium frame?