Hand Cranked Grinder Restoration [Light Grey Bench Grinder]

This restoration is a hand cranked grinder. The condition of the old grinder is not the worst, but the antique machine is partially rusted, shafts are crooked, paint damage and more I have to eliminate in this project. Many simple techniques are used in the restoration, such as: Sandblasting, working on the lathe, working on the lathe, using a press brake, using rust remover, painting with spray cans, filling the objects, welding, polishing and some more.
The video is a little longer this time, but that's because I don't want to leave out any step or detail. It is not about speed and efficiency in my videos, I'm all about calm and patience to complete the tasks precisely and accurately. It can happen that you invest several hours for a small thing. Therefore, please note that this video is not only to quickly show someone how something works, but it should also help to relax and escape from everyday life!
▬ What did I do ?! ▬▬▬▬▬▬▬▬
As with any overhaul, this old grinder has to start with disassembly, which is a lot of small parts and a few large major components. I noticed that one of the shafts was bent and I had to rebuild it during the course of the project. I also had to remake the sleeve for the wooden handle, the shaft for the wooden handle and the wooden holder for the grinding wheel. After I filled and sanded the parts, they were primed, sanded with wet sandpaper, and then painted. I treated the insides of the covers with heat resistant paint so that sparks would not destroy the paint there later. I painted the hand crank sander in light gray, the old remains on the antique machine told me that it must have had this color originally. Turtle helped me a lot with this project again, did you actually notice anything about Turtle?
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: Screwdriver, tweezers, pliers, wrench, pin punch, hammer, water, soap, wire brush, lathe, brush, paint stripper, scriber, ruler, angle grinder, deburrer, cordless screwdriver, drill, sandblasting cabinet, tap, tape, file, sandpaper, welding machine, welding helmet, putty, primer, scalpel, spray paint, heat-resistant paint, sheet metal, chisel, saw, folding bench, rust remover, polishing stand, polishing paste, linseed oil varnish, chisel, lathe, grease
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!

[@dumpsterdivekiller]

I fall asleep to these on a daily basis.. the passion you have for your craft is beautiful. Keep up the good work! 🐢

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@GoldRaven-oe4by]

I do to honestly its so satisfying and relaxing

[@sunita9894]

kzbin.info/www/bejne/gp7UaGaQfJWNj9E

[@creativeheroes]

Same.

[@nuggetdoesstuff8043]

Anytime I’m having trouble getting to sleep, I just watch one of these and it works perfectly

[@tillythekid]

I randomly stumbled across this channel despite it not matching up with many of my interests and I am enthralled. Its so relaxing and satisfying. Thank you for sharing!

[@petepeterson4540]

I liked the Turtles eyes🐢

[@ForgottenShineRestoration]

🤣👍🐢

[@mskayla7747]

Very nice. That takes me back many years. My grandfather had one of these. Thanks for the trip down memory lane I enjoy the longer videos that show the detail.

[@shoebox9869]

Yall are talking about how you fall asleep to these, while here i'm not allowed to touch any device when I want to sleep ;-;

[@HAVOC-ji3yv]

Then how are you commenting on videos if you’re not allowed to touch the technology all around you?

[@Restorationcircle]

Congratulations! Great Work! You're amazing keeping all the details

[@ForgottenShineRestoration]

Thank you for your great Feedback! 🐢

[@restaurandocoisasvelhas]

excelente. muito bom.

[@gamer_dhs8475]

The turtle is the best friend of restoration 😂🐢🐢🐢

[@saimwrites2979]

And yes your work is an amazing by God.

[@sugarsammy7209]

I like the faces on the turtle lol

[@ForgottenShineRestoration]

🤣🤣👍🐢

[@mushfiqurrahman2515]

Yo, this is good video. Crazy how the turtle face is just goofing, also when he was taping inside a hole

[@james.d.fowler]

This restoration was really nice. It helps that it wasn't in too bad a condition to start, but you really brought it back to brand new!

[@kath5201]

So many of these old tools my Dad had in The garage. Its good seeing them again. Good memories of Dad puttering around in the garage.

[@ForgottenShineRestoration]

🤩👍🐢❤️

[@garam_orakgaan]

어린이도 볼수있게 중간중간에 거북이를 넣는 센스! 아주 놀랍습니다

[@jlindskog5141]

Wow wow wow, toller Job! Sehr professionell und deine kleine rote Schildkröte auf dem Stickerpapier gefällt mir auch sehr gut! Ciao🐢👋🏼

[@ForgottenShineRestoration]

Freut mich, danke! 🐢

[@myarmsrgone]

Love how you edit your face onto the turtle

[@ForgottenShineRestoration]

Thank you! 🤩🐢

[@brynns305]

I don’t know why I love this channel, but I do!😍

[@ForgottenShineRestoration]

🤣🤣 Thank you 🐢🍻

[@2005cms]

I love how you give 🐢 an edited face

[@CL-we8tn]

Really good add on for future eye protection.

[@coolestdadever1511]

For plugging the screw holes and others, try just shoving a cotton ball into it. It forms to the shape and is easy to remove with needle nose pliers. 👍🏼

[@schallkiste82]

Hammer. Ich mag deine Detailtreue (auch wenn das Objekt hier und da etwas undankbar damit umgeht ;)) und dein tolles Upgrade mit dem verstellbaren Aufsatz. Ich musste echt lachen, als die Schildkröte angefangen hat, lebendig zu gucken 🤣

[@ForgottenShineRestoration]

VIelen Dank für dein tolles Feedback! 🤩👍🐢

[@jazzhandssixninesixninesix40]

I appreciate the filter over the welding sections. My Mechanics is excellent, but they require practicing your safety squint on the welding.

[@kingofalltrouts2189]

This man could dismantle a car and not make a noise

[@packerbacker9109]

My mechanics would be proud!

[@RaekenZayt]

I have become hooked on these videos, thanks for taking the time to make them. Love the humour as well

[@ForgottenShineRestoration]

Thanks very much! 🐢

[@rosellabill]

Your turtle even get's a welders shield. And for me. Thank you for this

[@ForgottenShineRestoration]

😅🙈🐢

[@ItsAlohaMonday]

I love how turtle has a face now, lol! That alone earned my sub! 🤙🏽

[@lucieleimbach]

I love watching your channel. It’s nice seeing 🐢 assist you. I know he was appreciative of the face cover you applied for safety.

[@ForgottenShineRestoration]

🤩🐢👍

[@coreysullivan2669]

Your video's is what I watch on my lunch breaks love your work sir keep it going👍👍

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@user-kt9xq2ll2e]

Отличная работа! Поздравляю! 👏😀

[@ForgottenShineRestoration]

Большое спасибо! 🐢

[@georgebrown8312]

Great work restoring the grinder. It looks good and it works like charm, too.

[@Hadassah-KaquoliMReno]

Turtle is adorable and the eye guard is fantastic! You did a very good job restoring it!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@oliwiabogusz3354]

Not sure why but your videos fill me with joy. It's always fun to watch and see how things change in your hands!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@rafael8840]

a tartaruga é uma das melhores partes

[@actualturtle2421]

The face on the turtle is priceless.

[@MichaelSmith-dg3kr]

Sir, I believe the grinding wheel runs in water for cooling, and as the wheel spins it runs through the water in the reservoir. great work. Have a blessed day.

[@mariahmayers8869]

I think the water serves as like a thing for more friction, kinda like a whetstone. I dunno though.

[@Austeration]

Beautifully done 👍 I liked all the lathe work and the fabrication of the new safety device. Looks amazing.

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@Jubair194]

I am just in awe of the skills you possess

[@chrissilver8461]

We definitely enjoy your skilled restoration of old machinery, but we really enjoy your turtle that reminds us of the annoying orange...without the annoying! Please keep making new videos.

[@ForgottenShineRestoration]

🤣🤣🐢

[@wolfiemelody209]

Turn old thing into a new thing, make it the best video I ever seen

[@grapesodap0p]

I love how you put a filter when you welded the hinges, so it was like we put on the mask too. 🤣

[@mattansell7691]

What a transformation! It looks better than new.

[@ForgottenShineRestoration]

🤩👍😊🐢🍻

[@yana1955]

Nice, informative captions.

[@claymore440]

You can save yourself a lot of time and effort by using foam disposable shooters ear plugs to block holes when painting it saves time from taping all those holes. They are very cheap or free at trade shows. You can squish them down for small holes or use 2-3 for largest holes.

[@ForgottenShineRestoration]

I love this tip, thank you so much!!! 🐢🤩👍

[@Little_Red_Riding_Hoodlum]

I love it when I see someone that can just be a little silly.

[@ForgottenShineRestoration]

🤣🤷‍♂️🐢

[@kuangsiewyong8408]

Nice. Another edition to your weapon's factory

[@georgegentry8922]

Hi, very good restoration, just to let you know this was a wet grinder, the base should have water in it, there should be a drain hole with which to drain the dirty water. regards

[@frick566]

This is a "Wet" grinder..water is used to keep the objects cool while grinding

[@frick566]

Your add ons are spot on!..great fabrications!

[@stevenmarin6893]

I love to see the turtle 😂 is my favorite part 🖤 good Job my friend. 😁👌

[@ForgottenShineRestoration]

Thank you very much! 🤩 🐢

[@HannahMattox]

Turtle with a face is my new favorite thing 🤣🤣🤣

[@ForgottenShineRestoration]

🤗🤗🤩🐢

[@Legendofmudkip]

The welding mask bit with the turtle was so funny

[@ForgottenShineRestoration]

🤣🤣👍🐢

[@natathaduplessis3861]

I really don't know how you do it it you should never stop KZbin and Kan you please do a Katana or sword restoration next and keep up the good work

[@DANYMITERESTORATION]

What a beautiful piece of equipment and you did such a great job letting it shine again. Thumbs up!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@hanakokun3741]

The process and the final product are just amazing, very satisfying :) keep the great work 🐢

[@whittysworkshop982]

Very good work lad :) I find ear plugs work really well for plugging smaller holes before painting :)

[@paulorth2251]

Great work, very professional look and functionality for this tool is a given. Kudos for your patience and craftsmanship. Thanks for sharing this video. 👍👍😁😁🇨🇱🇺🇸

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@CatalystRestorations]

11:12 that face caught me so off guard, lmao also 22:51 I forget to plug things in all the time too, hahaha Keep up the humor game, I love it so much.

[@ForgottenShineRestoration]

Thank you very much for your great comment! 🤩👍🐢

[@samuelfellows6923]

Applying human eyes + mouth/anthropomorphising his turtle brush 😁

[@user-handsomeflower]

왠지모르게 마음의 안정을 찾았습니다

[@johnconnor555]

Wow , a long video but amazing job you did'it...just perfect ,no more words !!! 👌👌👌❤❤❤👍👍👍

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@flaviakoch7378]

I love your work and the way Turtle inspects everything! 💗🐢

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@andygamer12]

Amazing video as always, mad respect you're a pro, keep it up!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@bbcaa167]

Masterpiece 👍🏻👍🏻👍🏻

[@FernandoLopez-ll1zu]

Great, thank you!

[@chriscyrus2983]

Awesome job there bro that looks really great excellent Man excellent

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@Waldo_Ilowiecki]

Genius.

[@moistman12]

Looks good

[@GT_Racer347]

Where do you find these gems!!???? Wow! Fantastic!!!

[@terrancejones1999]

I love this video.

[@user-yy6zt9jy7f]

WOW ! 👏👏👏👏👏 당신의 복원기술은 예술 입니다. 나는 당신의 비디오를 보는 것이 매우 즐겁습니다. 당신의 재능에 경의를 표합니다 🙏 💜 좋은 영상을 만들어서 보게 해 주신 당신께 감사드립니다. 당신과 당신의 소중한 가족과 친구들 에게 신 의 축복이 있기를 기원하겠습니다. 작업을 할 때 다치지 않기를 바랍니다. 대한민국 🇰🇷 에서 Mr. JEONG 이 당신을 열렬하게 응원 합니다 👏👏👏👏👏 굿바이 ! 😄😄😄💚💜💟🖐🖐🖐🇰🇷🇰🇷🇰🇷

[@JeezyBoi18]

3:53 had me so confused!

[@srayou]

The turtle face 😂 I wonder if he's going to restore the turtle when she'll all used up 🤔

[@markneo1]

Excelente trabalho. Parabéns 👏🇧🇷

[@ForgottenShineRestoration]

Muito obrigado, bom ter seu nome aqui novamente! 🐢

[@petrolerd672]

@@ForgottenShineRestoration Uau vc fala português bom sabem, seu trabalho e incrível!

[@morninggamer8068]

Your my favorite Restoration channel

[@ForgottenShineRestoration]

🤩👍🐢

[@shoebox9869]

Frightened☺️

[@durkmurgle2645]

3:52 the turtle stare was a funny detail

[@re-fix9678]

very nice👍👍😘

[@billboy7390]

Very impressive and a lot more patient than me. Keep the videos coming.

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@landrelarose745]

Try doing this. Put your thumb of one hand on the end of the screw driver while with the other hand turns the handle. You might not be able to do this because you might be holding a camera. I additionally have a solution for that. There's a device that holds cameras that's able to be worn by the user. It's worn by around a person's chest sk that he or she is able to use both of their hands.

[@jaguar2587]

Шикарно👍👍👍❤️😎

[@Extreme-Graphics]

Another Wonderful Restoration! I think yours looks better than it probably did new! I am so glad that you protected "Mr. Turtles" eyes when you welded!!! I love your Humor! You Sir are: Der Handwerksmeister! I don't speak German, I just went to a Translator page on Google.

[@debsvlog8475]

VERY GOOD 👍🏼 😍😍😍

[@ForgottenShineRestoration]

Thanks very much! 🐢

[@oneshotme]

It looks great and you did a wonderful job restoring it as well!!!! I was wondering what you was going to do with a white plastic square 😂😂 Enjoyed your video so I gave it a Thumbs Up as a support

[@ForgottenShineRestoration]

Thank you very much! 🐢 🤩

[@oneshotme]

@@ForgottenShineRestoration You're very welcome!!

[@leeannadeubler215]

This is like the only channel I watch for restoration videos. You do a wonderful job at what you do! Keep up the good work!

[@ForgottenShineRestoration]

Thank you very much! ♥️🐢

[@robinjchambers845]

Top plate does not fit?? Otherwise excellent work😊

[@javanthomas4122]

Beautiful work

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@MuscoviteDN]

Oooooo!!! Awesome!! 《Pick!》nice)

[@emilywang5077]

The amount of patience, dedication and effort that you need is crazy! Good job to you, just subbed!

[@ForgottenShineRestoration]

Thank you very much! 😊🐢

[@carlypeters898]

Just curious, do you do anything with all those metal shavings?

[@adityatambora4218]

great bro, you are very creative, I always support you

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@darlo3089]

🔥🔥🔥

[@Sabinee211]

Another great restoration! Really loved the details and the new face of the turtle hahaha

[@ForgottenShineRestoration]

🤣🤣🐢🐢

[@mehmetsefameric9427]

😍💜💜💜

[@djevo3441]

Amazing job my friend congratulations

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@christopherprince3250]

Very nice, excellent job.

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@RestorationAustralia]

Very nice job, well done.

[@ForgottenShineRestoration]

Thanks so much and great to read from you! 🐢

[@user-rk2fk7wt9e]

🔥 🔥 🔥

[@sabriserttas3938]

Bu alet el değirmeni değil bıçak bileme aletidir.

[@pascaljeske7307]

Very good Job Love it sieht auf jeden Fall wieder top aus❤️👍❤️

[@ForgottenShineRestoration]

Dankeschön 🤩🐢

[@Mitbevuive]

Good very nice 😍🥰😘

[@CL-we8tn]

And fantastic job

[@ForgottenShineRestoration]

Thank you very much! 😊🐢

[@Miricrafts]

Nice details on video 👍

[@ForgottenShineRestoration]

Thank you! 🐢