HAND DRAFTING - ELECTRICAL & LIGHTING DESIGN

[@rubbish2307]

Thank you, this is very clear and informative. And it is good for me as basic entry level electrician.

[@triumphblissmawuli5146]

Am a beginner who want to learned about Architecture drawing so please if you take your time and do it,I will continue to follow your pages

[@migojolo2933]

You missed something, filling a section wall with solid color or double line hatch or using thicker line is a standard at architectural drawings

[@martinsimko5308]

Great video. Thank you for your efforts.

[@FLOORPLANSELEVATIONS]

Very clear and informative

[@horrormoviemaker1973]

Thanks for the this video

[@mizu3866]

So 4 ceiling lights controlled by 2 three way switch in a different location. The 1st three way switch can turn on the lights(or off) The 2nd three way switch can turn off the lights(or on)

[@contehnabieu]

Good

[@crystlepro9943]

This is satisfying and no sound is just even better! :D Its very useful!

[@dennismiller9681]

Could have skipped the first 6 minutes and started with the floor plan already drawn. A little explanation would be nice. Why does the small wall need an outlet? How small is small? Does a 4" wide wall need an outlet?

[@KevinCoop1]

Dennis Miller Your answer is 24" creates required receptacle.

[@dennismiller9681]

Kevin, yeah, 2' requires an outlet. The video could have mentioned that, and maybe gone into a few more details. For example, a situation I'm not sure about as I wire my new house this week is, if I have a corner, let's say in the living room, where the walls in the corner are both 25" long, and next to the corner are 5' wide doorways, apparently I need to put in 2 outlets even though clearly 1 outlet would cover the corner just fine. It seems like there should be exceptions related to either floor area or functionality, not just a blind rule of >2ft = another outlet. For example saying only one outlet is required in a hall, that's a practical allowance that makes sense. But I haven't seen anything practical for a small corner where the usable area in front of them is less than 5 sq ft.

[@KevinCoop1]

Dennis Miller The rules of the NEC are written around the fact that almost everything you buy (except for kitchen equipment and vacuum like equipment) have 6' cords. So receptacles are started a minimum 6' from a door, then 12' center to center around the room. I suggest you put them a little closer though so you can put them where they make more sense. So your two 25" walls in a corner requires (1)receptacle. Also consider that cords are not allowed in doors or door openings so consider each room. If you need something else, just ask. I designed electrical systems since 1983. Little rusty on dwellings, but have 2017 NEC within reach. Respectfully, Kevin

[@dennismiller9681]

@@KevinCoop1, thanks for your insights. I'm also aware of the 12' max spacing rule, but I was under the impression that the "wall greater than 2 ft" rule took precedence. Sounds like you're saying it doesn't, which would make sense IMO.

[@KevinCoop1]

Dennis Miller Correct. 24" to 12'-0" wall requires one receptacle. Have you researched and calculated number of circuits required?

[@priyankapatil6404]

Hey, I have a question why do you use the opening door and the sliding door at the same wall which leads the opening to the same space

[@pavlinawalicova1979]

maybe he forgot to draw a closet? :D

[@jcst9642]

is it normal to understand this without knowing anything

[@xscreamj]

Say something! Mute videos aren't very helpful.

[@Shdow1]

there isn't much to say, not like it's a tutorial

[@Help22222]

It's not supposed to be helpful it's more of a satisfying video than a tutorial

[@Duxaization]

It is also satisfying to know what is going on?

[@HandoyoK]

"Silent please, I am thinking" 😊

[@gabrielhensley2403]

Need some sound

[@junjiegupaal729]

where the panel board and the entrance service...where did u get the supply 4 ur 4r plan

[@junjiegupaal729]

very helful but something missing

[@ezekielcallejo110]

What kind of paper did you use to create that drawing of electric plan?

[@aashirwadjaiswal3952]

what did you use to erase the color pen?

[@jeremybolanos2648]

3way switch 4 light?

[@triumphblissmawuli5146]

what are those red points close to the doors

[@djjonson]

Ye kiya bhai ko kanchna pakd liye hai kiya jra si bhi majal sound aa jye

[@jdog370]

No space for a smoke detector even though there is a fire place

[@harunkhan5462]

t was GOOD but i did not like that much because it was not sound.

[@harunkhan5462]

what did you use for erase the pen

[@muni.ontariontari6168]

fans are in series connection it is right

[@persona250]

a fan would be wired in parallel

[@mugweriismail9084]

I need to down load this vidio

[@musaddiqshah698]

But he didn't mention sockets ..

[@jemboydaneoso173]

JEM BOY B. DANEOSO DEPARTMENT OF TECHNOLOGY BIT 1F MAJOR IN ELECTRICAL DAY

[@parulbareja799]

we are not understanding the proper theme , say something in ur vedio , it will heLP us a lot

[@mannum5332]

Good you tupe

[@Xionarq]

Ok. Don't you think you could have the plan ready before begin the video?

[@rayhan555]

Where is the voice?!!

[@selfinterest4874]

Magkano po ang babayaran sa PEE pag nagPAGAWA po ng electric layout plan

[@westinthewest]

The sound of the pen moving along the paper is distracting.

[@melds1790]

There's literally no audio.

[@SonofPathan]

Use autocad body save time

[@anonymousperson4363]

@ Son of Paton, An average person won't have AutoCAD.

[@baobaoxue5985]

this 3way switch control system drawing wrong omg 。。。

[@isheryhan00]

ah

[@comedyking7096]

why are wasting for my time to draw a civil line

[@tweteisepeter8183]

A bit of sound

[@comedyking7096]

poor drawing

[@claudiaLaCroix007]

I need someone to say something!! Useless without explanation

[@joycelada9933]

no supply it’s useless😂 there’s no connection in outlet and where’s the breaker?

[@galoespineda6804]

What a wasting time

[@mayurpatil0868]

No Thanks

[@triumphblissmawuli5146]

what are those red points close to the doors

[@triumphblissmawuli5146]

what are those red points close to the doors