Awesome video! I like the way you made it into a 5-step system.
@wandercrafter Жыл бұрын
So glad you found it helpful!!
@Sakartstic5 ай бұрын
How long does one bur last?
@guillerminaviera30675 ай бұрын
Is there a way you can engrave the Opposite way especially if your engraving a wine bottle
@joycep5237 Жыл бұрын
You write beautifully - how can I achieve this if I am unable to write free-hand calligraphy ?
@wandercrafter Жыл бұрын
such a great question! You can purchase chalk or transfer paper, print it on there, then trace onto the bottle and engrave it! It's in my amazon store and I'll make a video on this :)
@alierem4266 Жыл бұрын
I note with my experience with similar equipment for over 40 years' professional engraving. Not been discussed here: . even with calligraphy skills, you will need to gain skill in using a spinning tip which is cutting into surfaces and will resist cutting tough surfaces including glass. . It is nothing like using a pen/inked nib or a brush, it is quite unforgiving. . Unless good competence is gained (extensive practice needed) as you touch a surface, the tip will want to run off that surface. . On glass, it is best to use scrap bottles --as during initial stages-- spending any money on bottles will be wasted as they will be messed up through exercise work. Be aware of accidents. Keep the supporting hand away from path of any possible slipping --as tip is sharp, including round diamond crusted tip.--. Check warranty limitations with any equipment and whether replacement chargeable batteries are available.
@pepitawilliams5564 Жыл бұрын
Hi there I am have difficulty getting smooth lines . They feathery and not solid & smooth. And on black or dark bottlle its also not smooth especially Tom Ford and the Pink Klin perfumes. PLEASE HELP
@jjhandwritingacademy4183 Жыл бұрын
Well explained madam! Can give details of the device used for writing letters,
@wandercrafter Жыл бұрын
Yes of course! I use the Yokefellow to engrave, all of my tools are available on my Amazon storefront: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y
@essamjadallah1976 Жыл бұрын
What is the name of the drilling machine and what is the brand
@wandercrafter Жыл бұрын
You can find all of my tools on my Amazon storefront: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y
@pepitawilliams5564 Жыл бұрын
Can you include a trouble shooting page. E.G. Why are you getting feathery line ? Solution -
@wandercrafter Жыл бұрын
Hi! At this time, my engraving content is included in my course, The Craft Academy! it may help to use a smaller bur, use bur lube, and slow down your rpm until you get more comfortable with your engraving. All of these are in my Amazon storefront!
@jocelyneangol74222 жыл бұрын
I amfrom the natue island of Domonica i want lrarn this art some day i will when to travel to learn it i want formal class for mow looking it
@wandercrafter Жыл бұрын
you can reach out to instagram.com/letterthisletterthat to find out when her next class is!
@lloydbannister806210 ай бұрын
Where did you buy your engraver that’s an awesome video
@wandercrafter10 ай бұрын
I have it linked in my amazon storefront and even did a review of all the engraving tools that we recommend! Amazon: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y YT video: kzbin.info/www/bejne/bpmyi5ikbZyGmZo
@lloydbannister806210 ай бұрын
Oh ok the only thing I saw was the nail machine so sorry again if I mistaken it for something else
@luciacataldi75542 жыл бұрын
Is there something else I could use instead of the "rub n buff" ?
@wandercrafter Жыл бұрын
the only alternative I've found is using acrylic ink + nib/pen to fill in the lines. it's more time consuming, but nothing else we've found has worked.
@mindful64652 жыл бұрын
Hi Love you work How and where I can make a order?
@wandercrafter Жыл бұрын
hi! I dont take commissions anymore, but check out www.wandercrafter.com/directory to find a calligrapher near you!
@debrastutts95172 жыл бұрын
Where do you purchase the bottles?
@wandercrafter2 жыл бұрын
I got these on Amazon!!
@mariaguerrero91962 жыл бұрын
WHAT IF YOU CAN NOT DO CALLIGRAPHY AND WANT TO ENGRAVE USING A TEMPLATE?
@wandercrafter Жыл бұрын
such a great question! You can purchase chalk or transfer paper, print it on there, then trace onto the bottle and engrave it! It's in my amazon store and I'll make a video on this :)
@halilenz49012 жыл бұрын
I just found you on tiktok, thank you for making videos. I feel like this might be my next hobby!
@wandercrafter2 жыл бұрын
Yay!!! I have a course coming out soon with all the details!
@lsingletary3073 жыл бұрын
Thank you for your insight. Very knowledgeable.
@wandercrafter Жыл бұрын
you're amazing Lashay!
@texasmarshalls Жыл бұрын
How much would you sell this custom engraved water bottle for at a show?
@wandercrafter Жыл бұрын
I don't sell these bottles, they're gifts for my coaching clients! However, if I were to put a monetary value on it, I charge a minimum of $50 per item engraved!
@AliciaJBerti2 жыл бұрын
Looking for your supplies list?!
@wandercrafter2 жыл бұрын
Hi Alicia! Check out my Amazon list here: Check out this page from Rosie www.amazon.com/shop/wandercrafter New videos coming soon!!
@AliciaJBerti2 жыл бұрын
@@wandercrafter is the pink engraver on your Amazon page the one you use?