Hand Made Tire Bead Breaker - Rat Rod Style

[@andrewislam7295]

I love this video so much. Too many reasons to list. Well done!

[@RatRodBobBuilds]

Just used it again on Gator Bait on my new channel. Rat Rod Bobs SideShow.

[@rickmcclung6729]

TMR is right on the nose, one I really liked was Bob's 3 foot tire iron with the custom upgrades on each end.😊😊

[@thecrowsblow]

Well done. Basic and simple and it all works👍

[@davidwood1923]

Thanks for Sharing... Bob... It's the Simple Knowledge and Videos that don't seem to be out there.

[@frederickkwek3772]

This is the best tyre changing video!!!! Appreciate you for putting it up....thanks a lot for the great effort

[@franksgarage8551]

So easy even a geezer can do it! Impressive bead breaker. I have owned tire changers for 30 years, so breaking a bead hasnt been a real issue. Still enjoy watching someone that is skilled at tire work.

[@toddclark332]

Yes sir Bob bring back some good old memories we did do that down at the salvage yard full we ever got a tire machine thanks buddy hey have a great weekend

[@consciousobjector2507]

That little move with the channel locks to put the tire valve on was pretty cool! Great video!

[@richardlincoln8438]

Dang it Bob. Yer hired..best tyre lumper on LubeTube.. 😅. Thanks for sharing, Best Wishes..

[@keithmaxwell2169]

Dang Bawb you made that look easy

[@mitch0078]

This is a very simple but effective tool you’ve built. This is a lot quicker than some of the other ways I’ve seen people break the bead. 👍🏻

[@deesmykla10]

I've done many a stock car tire that way since they wouldn't fit on a tire machine. My beadbreaker has a curled tip so very little angle is needed and is less likley to damage the bead or sidewall. I couldn't tell if your's was curled at all. After mounting the rear bead I have to get the tube in place with baby powder on it so it slides easier... then carefully get the outside bead on without pinching the tube. I always use waterless handcleaner to lube the bead... Works great...

[@midnightrunner684]

As young kids back in the 70's growing up in the country .us boys would ride our bicycles up to the gas station and watch the Gas station attendant change tires and we got a kick out of the loud Pop that the tires made when bead sealed ...Fun times .Good Memories

[@HardCoreFab]

That bead breaker worked damn good! I think I'm going to have to make one. I'm glad I showed up for school today.

[@College-Boy]

You, sir, are amazing. Great tool, wish I could buy it.

[@shotsrodder]

Damn Bob you whipped that one way too easy 😂😂

[@mikecook4298]

he' s damn amazing to be able to do that! .... i still cant believe how tough that man is , made it look like a kid could do it!

[@brianfalls5894]

Bob, you never cease to amaze me. I've never ever been able to hand change a tire as quickly as you have just done it. That's very impressive in my book!! It fascinates me too about that Dodge of yours. I don't believe I've ever seen a 1500 from any truck manufacture with a Diesel in it. Way cool sir!

[@sergioleandro3396]

Thanks for sharing the way the tire chop charge this days I'll be handy thanks again Sergio

[@PapawMule]

Got one of them homemade bead breakers.. used to fix my trk flats yrs ago.. they work gud.. gud video..

[@robertbeaulieu8721]

I love watching people like Rat Bob that make something out of nothing he made that look so easy. Thanks Bob

[@Abdsyria-k5t]

Thank you very much. Your work is great and you helped us with your method to remove the frame easily

[@billq3619]

I used to watch my uncle do that back in 60,s I had to unmount and mount a couple of riding movers tires myself earlier this month it was a success as well. Awesome video bob

[@nickaxe771]

Just like I have been doing my own tyres for 50 years. I take my hat off to you Sir. We are a dyeing breed.

[@rockerpat1085]

Last time I needed a set of rollers installed they cost me 60 bucks!!!! I'll probably just buy the Harbor Freight tire changer for the same 60 bucks next time I need to change some tires!!! I do like that breaker though!!! Nice and heavy!!! Keep Rocking it out Brother!!!

[@mdeyab]

I like this tool. No need for leverage. Only extreme violence against the tyre :)

[@jamespollard1670]

That bead breaker worked awesome .

[@fatroberto3012]

Love it. I've got to make one of those bead breakers. Looks a lot safer than hitting things with a lump hammer!

[@RatRodBobBuilds]

Definitely!

[@kevinjaeger9648]

Man you made that look so easy Thanks for the sale ordered my first Rat Rod Bob t-shirt

[@RatRodBobBuilds]

Awesome! Thank you!

[@bwsgarage]

Tire jumped off that rim. Love the bead breaker tool. ✌

[@gobboilino6285]

Having a go tomorrow. Brilliant video. Best one I seen. Thank you.

[@jjustinengineer]

Wow! That was amazing. Great skills!

[@hoagiesherlin7732]

Pretty slick bob

[@Famy-bc4ri]

Great job nice and easy 👍👍👍👍

[@56smitch]

liked watching that. makin it look easy. liked those birds singin out back too. maybe run a mic out for background sound.

[@billypeters3249]

You nailed it again Bob. That beats laying a two by six on it and driving a truck up on it. That takes two people.

[@jimh2061]

Now that's exactly how to get things done. You go to the tire shop and they want to sell you 4 tires. Lol That bead breaker is awesome.

[@PhilHewkin]

Thank you for showing this dandy tool, I am going to make one!

[@hemidart7]

You are the only old man I know that does lawn jobs....Hahahahaha

[@jimschafer9196]

Love it class in session ... Manual tire change, great clip. I did not see the colored dot on the tire, I did that back in the day a bubble balancer on one tire was spot on the other tire needed on a very small weight. Thank for the share.

[@martinharris5017]

Amazed how easy it came off! Nice tool may have to make one.

[@RatRodBobBuilds]

Probably the first video I ever made were things went better than expected. LOL

[@johnbaker3549]

Sweet!!! Gotta make me one of those. Teach my grandson how to use it! As always, Love the channel. Blessings to you.

[@ZAPATTUBE]

You sure got a good system there!

[@14KiloWhisky]

Good job 👌👍

[@anthonytrodriguez7166]

Nicely, easy done

[@johnnygarrett6055]

Good to know info for the younger generation.

[@IronHorseGarage]

Good stuff!! A few people have recommended you so we subscribbed!!!

[@RatRodBobBuilds]

Awesome! Thank you!

[@jahsurhofjudah6053]

Nice, thanks buddy.

[@380.motorsports]

Pure Rat Rod genius how simple that bead breaker is. I gotta make me one!

[@sylvainleseur1072]

Thanks to share.

[@deopersad2915]

That was a easy one, I used to have one of those cheap tire change machine the bar to change the tire was useless so had to modify it, but had to fight with small tire bar's to get tires on, but now I'm going to make my own one or get another machine if I got the money, as it costs heaps to get a puncture fixed here in New Zealand or tire's swoped , so I might make a breaker like you're's as well 😀👍🏻 thanks

[@peterkowalsky6597]

Bob you sure made that look easy lol

[@markgriffin9699]

Ya whuped that out purrdy fast Bob!! Preciate ya!!

[@The46Ratrod]

Professor Bob showing off doesn't always work out that quick,

[@RatRodBobBuilds]

Yea I got lucky on this one!

[@neild167]

I'm researching this right now. I had planned on starting today, but now I'm stuck on what method to break the tire bead. I know there's floor jack and scissor jack methods that require a bit of creativity, and then there's this that got me thinking about this 6 foot heavy 3/4" steel rod that I have but the end isn't exactly right. I was also thinking maybe a heavy flat iron and a sledge hammer to improvise what you've got there. First time doing this and got the low profile tires. Good video, and the method seems less fuss than the others I've seen.

[@briankinnear7461]

Glad you noticed the issue before you really needed that spare tire. Great bead breaker. Be safe and stay well.

[@wackingjack]

Wow! You did that so well, you're a stronger guy than me, I'm 5*10* 150 pounds and when I only change motorcycle tires I feel like I've done some heavy work. Perhaps because I'm 67 but it's a job doing it. Vet good video.

[@halffasthomerepair9223]

Looking real slick

[@dielauwen]

I like your bead breaker. I usually run over the tire close to the rim. Results vary.

[@blvkvibes5343]

😭

[@TheCanadianBubba]

Must be some springs in that truck ! Great to see you Bob !

[@RatRodBobBuilds]

Yea I upgraded to 3/4 ton front springs.

[@TheCanadianBubba]

@@RatRodBobBuilds- and this is what was top of the list with the # thing.

[@nigelbews3335]

You made it look easy

[@48willysjeepcar96]

I like the way you used the Chanel lock handles to pull in the stem.

[@RatRodBobBuilds]

Yea regular pliers handles works better but the channel locks are better for pulling the weights so I had em handy!

[@craigh2249]

Great video and job.

[@billq3619]

Nice just like one two three.done

[@ratgasgarage]

Great tutorial boss, I got one flat tire to do on my 41,im a get at it, save sum moolah, thanks bob

[@WACRE44]

Thanks Bob learned some tips from your tire job thanks again

[@michaelmarusic8499]

👍🏻nice job on the tire 101. My dad showed me how to do it the old school way when I was a kid, I do like the pipe bar and pipe trick!!!

[@mikesbobcatservicesllc-mic6927]

Perfect video, get her done.

[@joseleiva7784]

Thank you Sir 👏🏻👏🏻👏🏻👏🏻

[@perryramberg9131]

old school cool bob!

[@henryescat1104]

I need to get those tire tools.

[@xKmotx]

Heck, I can't even put on an RC car tire as fast as you put on a real one! 🤣 Have a great Memorial Day sir!

[@redracer1969]

Thanks Bob, you make it look so easy!

[@AndysDogHouse]

Hey Bob. I hear ya when you say save some money and do it yourself. I just finished mounting 4 new tires on my Fargo. More money for truck parts. Thanks for sharing.🍁👍👍

[@terrydolbow4299]

That is how we did it on the farm!

[@johnbeardsley7360]

good job

[@mikemcguire8351]

Slick as a frozen dog Bob.

[@mongomay1]

Thanks Bob!

[@shanewright6958]

That tire was ready to get off that wheel. I have fought with them for a while to get them off👍👍🇨🇱

[@shakaelmassercanoadios8675]

Ese vídeo es más falso ,se nota que la llanta está suave.

[@petersack5074]

i've found, taking a break - drink half a beer / go get 'er done a g a i n . goodday , from Alberta.

[@mentaldogmark]

I have used those braker bars many times on old farm tractor tyres

[@tomsawyer247]

Bob's school of tire rodoligy.

[@mentaldogmark]

Mind I have also broken the beads with ford transit van wheels against a curb stone and then used spanners as the levers, then dove soap and orange juice to reseat the bead. It worked well

[@TK42138]

Great video 👏👏👏

[@wyattoneable]

I like the tool Bob. Nicely done.

[@joehall4569]

You can make a pretty good bead breaker out of a old car jack too. I bought a cheap tire changer at H F bent the hell out of it the first tire so I had to add some reinforcement plates to it.

[@ratrodrockstars8888]

I like that tool for breaking the bead we always use a board and the truck to run up on board but that looks easier

[@RatRodBobBuilds]

Yea but keep your board handy. Sometimes they get really stuck on there. This works on the average tire though.

[@ratrodrockstars8888]

I like it it’s a nice trick to put in the bag

[@moparandbill]

Bawb the tar man! I gotta make me onenna them breakers!

[@mrchad97z49]

11:59 I didnt know the there is a mechanism to raise and lower that spare tire! I just learned my mom's lexus SUV has 1 too. awesome (Nice big garage)

[@cliffhaupt5413]

It never goes that easy for me. Always a fight. But love your bead breaker.

[@steveshoemaker6347]

Tire time....That will work....Thanks Bob...!

[@viorelciocan2457]

Cea mai tare inventie! Bravo men...👍

[@shartne]

I three tires I need to do this to. I dont have those nice tire pry bars though have to use screw drivers and little pry bars.

[@garyparker2969]

That's The Way to Do It Baawwbb & ya Didn't Need Red Atoll !!! God Bless All The Veterans.

[@saberconstruction7224]

Man. I want to come work in your shop.

[@tinysgarage2347]

Changed four tires myself last night Saved at least 60 bucks or better.

[@michaelbristol6467]

Bob is a well seasoned veteran, just another day at the office. 😎

[@bruce_1986]

Nice

[@freddiebates5539]

How did you know I have been fixing tires for the last two days, on everything from lawnmower to just rollers tires to move these darn vehicles around in a different spot. Grass cutting time you know. Next time I have lawnmower tires to fix I'll send them to you ! And we'll see how that goes. You got it !

[@RatRodBobBuilds]

Ha haa ... send it!

[@chevelleranch7481]

Damn right you saved money Bob!! Just today I took 30 wheels ( cleaning up the yard to move) to my local tire shop to have them taken off of the rims so I can scrap the rims and dispose of the tires.....they charged me $5 bucks each just to dismount them....it took 2 guys about 15 mins to do it....and it was $150 bucks....what a racket tire shops are.

[@RatRodBobBuilds]

That's a lot of wheels ... probably some I would love to have. Too bad you're so far away. Moving closer?

[@chevelleranch7481]

@@RatRodBobBuilds Mostly junk wheels Bob. I'm not sure where I'm moving to yet. I'm going to stay in the area for at least a couple years to finish up some projects. Nice job with the bead braking tool by the way....looks like a pretty handy tool!

[@stevenautumnmyers6329]

Love the content you should get a harbor freight manual tire changer it 50.00 holds the tire has a bead breaker and it holds the wheel .it made like the old fashion tire shops had

[@williamculp8865]

Ive used the car bumper and a jack...years ago..I like that way better

[@frankmoore159]

👍