As a former 35 year teacher I find beyond a shadow of a doubt you are the one of the best if not the best on you tube. You are incredibly clear, concise, direct, knowledgeable, and most articulate. That is so evident since you do not use the most used word in the English language... “um” in every other word of your sentences. Thank you
@MrMeasureTwice5 жыл бұрын
John S. - I totally agree. I am a former Navy Master Training Specialist and I see the same quality and characteristics you do in Rex's videos.
@nayosilver11805 жыл бұрын
Ok ok...but remember that this actually is a sharpenning tutorial....could you concentrate on evaluating his TECHNICAL skills please.
@c.e.kestner40514 жыл бұрын
Ooooh, "um"-jobs are the worst offenses that any KZbin host can commit.
@squirehaggard47494 жыл бұрын
@@c.e.kestner4051 Yep, that and "background" music overwhelming said host's voice.
@johnbesharian99654 жыл бұрын
@@squirehaggard4749 As a professional musician, I completely agree.
@stephenholland63284 жыл бұрын
To the many beginners here: Rex is completely correct and do everything he does exactly the same way. 3-in-1 brand is important. The very first power tool you should get is a bench grinder. Friends (that were good woodworkers) made fun of me for making that my first purchase, but really, it is the first tool you want. Set it up with a wire wheel and coarse grinding wheel like Rex says. Get one where the motor body diameter is smaller than the wheel size, so that the motor is not in the way of larger items you may bring. Your second power tool should be a drill press. A small bench top one is fine. So many attachments can be made for drum sanding, a large table top, pocket hole drilling. With those two power tools you can fix most anything around the house and garden. Also, the grinder will make it a breeze to make the English Joiner’s Bench stop from the hinge. Other tools are a good battery powered hand drill (the little 12 volt Bosch are delightful), a circular saw (makes easy work of breaking up plywood) and a jigsaw (very handy for smaller cuts, and when fit with a metal cutting blade, eliminates the work of the hacksaw). Those few tools will make for a very versatile home shop. Rex’s advice is fantastic. I love his bottom up approach to the hobby.
@capermache4 ай бұрын
I have recently acquired an ancient hand plane and binged dozens of restoration videos. This is way the most helpful and informative one I’ve come across. Thanks!!
@DavidGodwin57 Жыл бұрын
I grew up around this stuff my Grandfather was a 'Cabinet Maker' who taught my father and his brothers all he knew. These men were building contractors in the 60's and 70's in the intervening years I have been away from woodworking.Watching your videos has brought it all back to me and inspired me. Watching this video I remembered my father showing me the same thing and I remembered all of the parts of the 'noble' hand plane that my father taught me all of those years ago as you were talking about them. Thank you for your Chanle and for being an inspiration for me to try and pick up something I thought I had lost.
@travelingworm Жыл бұрын
5 years down the track and I still think this is a great video. All the attributes are there; thorough while entertaining - understated wit; nothing was skipped; applicable to all the Stanley planes you might have with respect to preventative maintenance; focus on money outlays while not being cheapskate; Rex, you have set the tone for the great business you now have and carried through for 5+ years; I am revisiting you back catalog for other gems - thanks a heap, glad to be a Patreon 0:07
@deezynar5 жыл бұрын
I've been using a bench grinder with a wire wheel to clean my dishes for years. Takes off dried eggs without any problems.
@GergC05214 жыл бұрын
:-D
@satibel4 жыл бұрын
Useful for your cast iron plates.
@jakeqwaninne85024 жыл бұрын
try an angle grinder for eggs, you can take it to the eggs, unless you keep your bench grinder on the kitchen counter like me, lol
@50842044 жыл бұрын
A plastic wire brush on the cordless drill does miracles on your oven trays.
@johngalt52054 жыл бұрын
I like to hang them out in the wind, and let the sand blast them clean. i.stack.imgur.com/LT9h0.jpg
@nicholmom234 жыл бұрын
I inherited a bunch of old tools from my dad that once belonged to my great uncles (and possibly even older!) They are in rough shape and I greatly appreciate your tutorials! More than that I can't thank you enough for doing voice overs when you are using the power tools instead of running the sound! I'm a fan for life!
@roymoneyhun2838 Жыл бұрын
Thank you so much for this, Rex. Just another garage woodworker over here who is always trying to up my game and keep it there while on a shoestring budget. Your vids are always helpful and encouraging. Hat's off to you.
@WoodByWrightHowTo6 жыл бұрын
thanks for the shoutout man! if you ever want to do a collab let me know.
@RexKrueger6 жыл бұрын
I'm glad you took it in the friendly spirit it was intended! I'm a subscriber to your channel and a regular listener to your podcast and I love both. I would be delighted to do a collaboration! How do creators generally contact each other without giving away their contact info to the entire internet?
@WoodByWrightHowTo6 жыл бұрын
it you click on the about me tab on my channel or the contact form on the website those are best.
@WoodByWright6 жыл бұрын
LOL nice!
@oliverdelica22896 жыл бұрын
James Wright lives the Thug Life😎😎
@DragonGateDesign6 жыл бұрын
Would love to see a collaboration
@stephenbryant78733 жыл бұрын
Rex, this was one of the most helpful videos I've ever watched. I have an old hand plane that had belonged to my father. It was a little rusty and also had some hard grime on some of the surfaces. I found that I could clean and smooth out the key surfaces with some 150-grit sandpaper (I don't have a bench grinder) and then clean and oil the rest, making it work much more smoothly. But I could only do this because you clearly showed how each part fits into the whole and managed to convey how the hand plane works as an integrated system. Many thanks!
@FastEddieDee2 жыл бұрын
Ditto, everything you just said.
@bionrogers5337 Жыл бұрын
Thank you, Rex. I have enjoyed a great many of your videos. I do have one observation to add. The dangers of wire wheels should not be minimized. There are several safety aspects and one is not putting your hand in a position that it could get grabbed. Just like any high speed rotating cutting tool, keep the fingers some distance. Wires can also come off and embed in your face, body, hand or arm. Eye and face protection is good for you. I know. I had a $20,000 surgery to remove a wire from my arm that had deeply embedded next to a nerve.
@georgeharris44289 ай бұрын
Just did a little tune up on my father’s Stanley 5 1/4 that hasn’t been touched in over 30 years. Thank you so much Rex
@Bloodray193 жыл бұрын
Rex 2017: Mocking woodworkers for not using powertools Rex 2021: *you've become the very thing you swore to destroy*
@RexKrueger3 жыл бұрын
You're not wrong. This is the way.
@aboveaveragebayleaf92162 жыл бұрын
To be fair he isn't a purist. He just tends to use handtools more.
@andersenzheng2 жыл бұрын
@@aboveaveragebayleaf9216 even paul sellers breaks out an electric drill from time to time
@eloscuro7042 жыл бұрын
@@aboveaveragebayleaf9216 I think he prefers tools that are cheap. And work for the job required. Watch his bit brace series to get an idea.
@FastEddieDee2 жыл бұрын
This comment comes on the heels of a video in which no less than 3 power tools were used and 20 percent of the video was how to select, buy, modify and set up power tools. Just saying. :)
@ggreenwi Жыл бұрын
I have watched this once a year for the last six years and it is my go-to master’s course in learning about my tool. You have done God’s work, or at the very least, my work for over half a decade. I’m now teaching my 9-year-old your tutorial. Thanks Rex!
@RexKrueger Жыл бұрын
Wow, that really means the world. Thank you!!
@ggreenwi Жыл бұрын
@@RexKrueger I will send you the link once the boys do it themselves. Your tutorial is the single-most comprehensive KZbin video out there. I work in schools and your video is taught in our district.
@jasondoust49353 жыл бұрын
Thanks again, Rex. I've recently inherited my Dad's tools, as he's gone into care with dementia. Today, I bought a wire wheel to go on his old bench grinder. The first job..? His Stanley #4 really needs some attention.
@barstad-95917 жыл бұрын
Wright is still down there on his hands and knees trying to get a bevel on that new piece of iron! Good natured poking of fun is one of the reasons why I like your channel. I’m glad I discovered it. Wood by Wright is also a good channel. Thanks for all of your sharing.
@RexKrueger7 жыл бұрын
barbara kvistad I love wood by wright! I'm glad you see the poking as good-natured. Thanks for the kind words!
@RexKrueger7 жыл бұрын
Hey Barbara: I just wanted to let you know that I just started a patreon page. All of my patrons will get early access to videos and exclusive content. I'm still going to direct most of my content to youtube and keep it free, but I am going to be focusing on patrons, making content specifically for them and communicating with them directly through patreon in the future. My basic level of support is only $2 a month, so have a look at my page: www.patreon.com/rexkrueger Thanks!
@larrymbouche3 жыл бұрын
I don't have anything against getting down on your knees and grinding by hand on a 40' long x 3' wide belt sand paper, except...... grinding your knee caps off. I'm too old for that.
@MrDaneBrammage2 жыл бұрын
Somebody better check on him. It's been four years.
@FastEddieDee2 жыл бұрын
Thank God people like Wright are showing us how it was done and keeping the craft alive. That said, bugger 8 hours on your knees with sandpaper when there is an easier way! :)
@MurrayC5 жыл бұрын
Thanks so much. I'm not much of a woodworker but have a plane in the garage that I'd given up using as it was rusty and blunt. In an hour this afternoon I've turned it into an easy to use tool that shaves even "papers" without effort. Thanks!
@RexKrueger5 жыл бұрын
That's WONDERFUL news. I'm delighted for you!
@FastEddieDee2 жыл бұрын
I'm a novice woodworker. Power tools mainly. I have a few planes my dad left me and they have been a mystery. I have watched 20 or so videos on sharpening and adjusting and using planes. Honestly, I feel like the others all taught me things, but this one sort of tied it all together and I think I can actually set up and sharpen my planes. Wish me luck!
@mikem54752 жыл бұрын
Watching that guy on his knees was HILARIOUS. Oh my goodness, he loves the struggle. Thanks Rex. Great video
@zbnmth4 жыл бұрын
remember, do not use gloves if you think bare hands are dangerous. Gloves get caught and pull your fingers into the machine! Rather just feel a little uncomfortable sting when your skin touches the wheel and get caloused or small wounds at most. edit: wonderfully clear and concise video, Rex! Thanks.
@Handcarvedbyrandy6 ай бұрын
I use pill bottles labeled for the plane to keep the small parts in. Making a simple jeweler's ring clamp is a great way to hold small parts for grinding and polishing. On frog faces and seats I use an old fashioned bearing scraper along with feeler gauge and straight edge to flatten them.
@CrashJay3 жыл бұрын
There's a very noticeable difference between this and your current stuff. A lot more upbeat and saturated (both in dialogue and image). Its really cool
@weekendwarrior95704 жыл бұрын
I had to stop the video an get the laugh out of my system at, "you have to be _ _ _ king kidding me". I needed that laugh. I'm a Tinsmith and when I had to learn Auto Cad and A Plasma cutter the older Journeymen rejected my interest is learning the modern way of Fabrication. Excellent video and process. Bless you for Sharing
@RexKrueger4 жыл бұрын
A tin smith? I would watch some videos about that!
@davidgarner75476 жыл бұрын
I got an awesome find today. I got a Stanley #5, Stanley #57 low angle block plane, and a Keen Kutter smoother at the habit re-store. It took months of visiting at least weekly (and making several other tool purchases along the way) but I got the three of them for $14 total. As they are listed $6, $3, and $5. They need some work but all of the parts are there and they are still in decent working condition. If people are looking for planes to restore they can be had at a deal if you are willing to always be looking and have a few bucks stashed away for when you find a deal.
@RexKrueger6 жыл бұрын
Outstanding! Those are all very desirable planes and your persistence really paid off. Nice work!
@0006224775 жыл бұрын
Hi Rex just found your channel recently and have found it incredibly informative and enjoyable. As a cook and sous chef in a professional kitchen for the last ten years I've done my fair share of hand sharpening knives. Although I don't know it translates to the plane blade, one thing I picked up a few years ago was to have a wooden dowel next to my stones so that between each Stone change, swipe perpendicular across the dowel using only the weight of the knife. This removes the burr and allows you to sharpen the blade itself and not the burr. Thanks for your hard work on the content!
@RexKrueger5 жыл бұрын
That's hot tip!
@babypunkangel3 жыл бұрын
Looking up garage sales and estate sales is a great place to look for old planes and other hand tools but all the power tools you'll need are out there too. I got a Craftsman grinder that was not only in "new" conditions... Whoever had it before took super great care of it so it was in great condition AND it came with five wheels from course grit to a 3,000 diamond wheel and two brass and copper brush wheels for only fifty dollars. It saves me over a hundred bucks if I went with buying it all new.
@abrumarci3 жыл бұрын
Some time ago I bought an old Darex plane - French-made Stanley. It was at a flea market, it didn't cost much. I will restore it using what I learned here. Thank you for the detailed video!
@jacksonwillis86835 жыл бұрын
Long live the bench grinder! I could not agree with you more on removing the fine wheel on the grinder, it's just useless. Once again, another great video from my favourite KZbin channel.
@RexKrueger5 жыл бұрын
Thank you!
@richardsinger014 жыл бұрын
I use the fine wheel for sharpening drill bits. Would the coarse one suffice? I would like to add a wire wheel.
@jacksonwillis86834 жыл бұрын
I start with a coarse wheel and then go to sharpening stones to refine the cutting edges when sharpening drill bits, but if the fine wheel works for you, then keep using it. You can always just change wheels when you need to and keep the other side for a wire wheel.
@cavemanjoe79726 жыл бұрын
Tip I learned from a welder about working with wire wheels: Glue a small rare earth magnet to a 2-inch section of dowel, and keep the magnet end covered, then keep this in your first aid kit. If a wire ever *does* manage to get flung into your eye, it is a very fast and safe way of removing it, that way you're just sitting in the E.R. to get your eye checked, instead of needing to wait three hours to have that bit of wire removed.👍
@RexKrueger6 жыл бұрын
Whoa! That's something I'm going to do.
@zombanator30005 жыл бұрын
Or um.... wear a face shield.... ?
@jim-zb2kb5 жыл бұрын
Goggles?
@jumbo4billion5 жыл бұрын
Please noone do this, it that could cause your eye more damage. Just wear eye protection, simple as that.
@matthewwysocki50192 жыл бұрын
I Enjoy your videos! You are a natural teacher! With just enough specificity for followers to understand and brief enough to keep the audience interested. Well done!
@CaptnDirt2 жыл бұрын
Thanks Rex! Picked up a Stanley Bailey #5.5 and #6 for 80 bucks all together. They appear to be in the same condition as the one in this video. Going to put them through your steps and hopefully will have my first set of good planes. Much appreciated. Look forward to more awesome videos. Love that you don't waste anyone's time. Great job!
@brucejohnson12644 жыл бұрын
This is a great video on practical plane restoration. It looked like fun, so I bought some old planes off eBay and tried fixing them up. Don't use a coarse wire wheel, a fine wheel is plenty aggressive on soft cast iron. Because of COVID, flea markets and the like really weren't an option, so I had to spend quite a bit more on some fixer upper planes. Instead of going right to the wire wheel, I bought some evaporust, and used a plastic shoe box as a tank to soak the parts. After about 24 hours, the rust is gone, even for very rusty and pitted planes.After the soak, I cleaned them up with the wire wheel, sharpened the blade, flattened the sole, and reassembled. Most of them work great. The only caveat is that for VERY rusty planes, the blade can get pitted on the back side of the iron. If this happens, you won't be able to get the back flat, and even if you get it mostly flat, pits will appear on the edge and cause problems. This isn't a big deal, as a new blade isn't prohibitively expensive. You can even get super nice PV-11 or A-2 steel replacements from Hock or Veritas.
@TheBert4 жыл бұрын
I watched this video months ago. I finally got around to tuning up my first two old Stanleys (a #4 and a #5 1/2 ). I do have a grinder but thankfully I didn't need to use it as they were in really good shape. They just needed some cleaning and resharpening. Thanks for the awesome content!
@warrenklassen11303 жыл бұрын
I lucked out and found a 1932 Stanly #4 earlier this week and spent all weekend cleaning and restoring it. It's oiled and looking almost like new, I just need to sharpen the blade and lap the sole and I'll be working in no time! It's my first plane and your videos were the inspiration to look around second hand stores to find one, so thanks!
@jamesparlane92896 жыл бұрын
Nice video. I have found old planes at yard sales that were just dirty and just needed a clean and not even a sharpen. You made it sing.
@alexlarson91017 жыл бұрын
Lubrication! Truly, very important.
@philipparadis9543 Жыл бұрын
Just started my first restore. Initial cleanup, need to do the full restore prior to use but it’s looking good so far. Really appreciate your down to earth approach to restoring and sharpening. I have a Stanley No 4 made in England. It was cleaned up with spray paint, but they didn’t remove the tote or front knob. Now looking forward to going through the rest of the process.
@andrewkierstead45934 жыл бұрын
the temper does not come back just by dipping the blade in water, has to be brought up to a certain temperature at which point the metal loses its magnetism and then dipped in oil or water, and it is very easy to remove the temper from that blade by even slightly overheating it on a power grinder
@dibley19736 жыл бұрын
You had me at "Dude, you got to he f***ing kidding me!"
@alexisjust92695 жыл бұрын
I don't literally laugh out loud often but that killed me
@VinlandAlchemist5 жыл бұрын
@@alexisjust9269 - Right? I totally did too, immediately! ahahahaha
@GodfatherAstro4 жыл бұрын
that look was priceless
@just-dl4 жыл бұрын
I love James Wright...but, yeah.
@lsantilli4 жыл бұрын
We all love James Wright though! Even though his perception of time is different than the rest of us.
@magicdaveable3 жыл бұрын
Thanks for another excellent video Rex. Top of the line Craftsman grinders are really quite good. I have 3 grinders. 1 Craftsman, 1 Dayton that looks the same as yours (regular Grainger's customer). And a very old hand crank grinder that has a very heavy flywheel. It is a workout to get it up to speed but has enough torque to provide plenty of grinding time. Once up to speed spinninging the crank every couple of minutes can maintain the wheel speed. The coolest part is that I found it in a junk pile for free. It just needed cleaning. Peace!
@jeremyparker17064 жыл бұрын
Rex, YEARS ago i bought a plane from harbor freight because it was on sale and I didn’t have a plane. I used it out of the box and IT sucked, but I figured I was just using it wrong. Both were correct. Fast forward to quarantine 2020: I have been watching your videos for a few months and I find this plane that I forgot I had. :) All the parts were there, but poor quality. The iron was ROUGH, but i got it flat. Your video was extremely helpful. THANKS!!
@fishingpervert4 жыл бұрын
I know this is a 3 year old video, but I'm just now getting a shop built and your videos are a great information source. I teach people how to work on motorcycles and outboard engines. Often, we're dealing with corroded screws, bolts and nuts. I've been offering a tip that works on these fasteners better than all other methods. Coarse Valve Lapping Compound. Honestly, there's no need to lap valves anymore. With the coatings they have, it's actually a bad idea in most cases. BUT ... a little on the tip of your screwdriver or allen wrench, a little in the socket or wrench and you'll never "cam out" of a screw slot again. (Maybe never is incorrect, but 99% of the time, it's apropos)
@ChrisStCyr-gnt7 Жыл бұрын
Rex and all, I purchased a Harbor Freight bench grinder at least 25 years ago. I’m on my second wire wheel and second stone but still runs great. The tool rest sucks and I should probably build something better just haven’t yet. Thanks for a great video.
@robohippy Жыл бұрын
I have had a small high speed grinder for years before I ever got into flat work, and it has the coarse wheel on one side, and the wire wheel on the other. Just made sense. For truing up the top of the frog, I have seen 2 solutions. One person used a piece of melamine and cut a slot in it for the lateral adjustment lever and the nub that engages the plane iron. Another one, some thing about super tuning a Lie Nielson block plane (boy was he persnickety!), he used a pin punch and I used nail sets, to drive out the pins for the lateral adjustment lever and the yoke, and the nub. This made it a lot easier to sand that surface flat. One plane I restored had one pin bent so bad the yoke would barely pivot. I was able to straighten it back out. Thus far, they have not been difficult to put back in. II do round over the end I am driving through first. I haven't had to replace any of the pins, at least not yet. Not sure how to do that. I even found 2 planes where the advance/pull back knobs went the opposite way that the others do.... Having fun!
@thedieiscast97293 жыл бұрын
Hi Rex, not paying attention towards the end of this video and heard you say you were looking for an Old craftsman. Well hey, that's me I'm 72 and have been working wood for a lifetime. But no it's one of those newfangled bench grinders that you're talking about.
@roberte.wilson5213 Жыл бұрын
I love this video. It covers the basics of general plane maintenance and cleaning. Tho i have a no power wood shed. I do have another building that does have electric. It allows me to get the best of both worlds.
@darcywilson28253 жыл бұрын
OMG, loved that first comment on the guy using Sandpaper
@a-yates4 жыл бұрын
I did learn something never knew they made sand paper that big haha
@shinigami3883 жыл бұрын
For a DOLLAR!
@JoeBob795694 жыл бұрын
I started watching this video last week, and I didn't own a grinder, and had no plans on buying one. I came back to finish watching this video today and somehow I now own a grinder. I think this video may be responsible for the purchase. Not that I'm complaining. Now, I'm off to sharpen everything that I own that has a blade on it, and some things that don't yet have a blade, like maybe some forks, and spoons..
@carmanmi4 жыл бұрын
Same here...rewatching so I can get to grinding my (also newly purchased) vintage planes!
@JoeBob795694 жыл бұрын
@@carmanmi Yes, I just picked up two vintage no. 4 planes myself recently, a Dronfield and a Stanley. The Stanley was quite rusty and tarnished so I had a great time cleaning it up on the wire wheel! It's really bloody satisfying.. I don't really use the grinder much unless I need to take a lot of material off, but when I do it's a godsend. Wish I'd bought one years ago..
@mildyproductive97266 жыл бұрын
Rust: The dark color and very smooth/fine texture of that rust is the kind that I wouldn't bother to remove. If it's not red/orangey or bulky/grainy, it's not a problem. Red rust is spongiform and flakey, and it sucks water into itself and propagates deeper rusting. The plum to chocolate color rust is one of the good rusts. Notice that the thing is covered in it, but there is no pitting. This is because this kind of rust is protective. Once it is in place, red rust can not take root. I would have cleaned up the adjustment screw and made sure the pivot lever moves. If you need to flatten the sole or whatnot, that's fine. The rest of that plum rust could use a fine buffing with chromium oxide on a cloth and some oil. That's it. It is hard and solid and it polishes great, and after any excess/loose rust is removed, it won't stain wood or anything else. This kind/color of rust takes many years to develop, naturally, in the right conditions. And when you find a plane that looks like, with this much saturation, it is possible it was well-maintained and regularly oiled and polished by an owner who understood there was no reason to remove this rust. In the old days, before stainless steels, chrome plating, parkerizing, epoxy coatings and the like, they (gunsmiths and machinists, in particular) used to put this kind of rust on parts, intentionally, thru many cycles of forcing surface rust with steam (and other solutions) and removing excess/loose rust with a card brush/file to ensure they saturated the entire surface. This was laborious work. Note that it is often referred to as a method of "bluing," perhaps called "card bluing," but the color it produced is exactly what your plane started with. Traditionally, it was called plum, but it is more of a milk chocolate brown with just a hint of eggplant when polished. I was sad when I saw the beginning of the video, because I knew your restoration would probably include shining up everything you could, when there was not necessarily anything wrong with the plane to begin with. If the plane were in good shape/form with the sole and all, it could have potentially worked very nicely for the rest of its life with that beautiful patina.
@RexKrueger6 жыл бұрын
It's hard for me to understand the point of your comment. You have different tastes in plane restoration than I do. That's great. Do whatever you like with your planes. This is an instructional video meant to help people get their planes up and running fast. I used the plane I had on hand. At 40 minutes, I think this thing is long enough without getting into the various fruit flavors of rust. If you don't like them restored this way, then by all means, don't do it. Also, this plane was not well-maintained at all. It sat for decades in a cold basement and was never touched.
@mildyproductive97266 жыл бұрын
The point of my comment was to share information. You do not have to read it, let alone respond. It is here for anyone who wants to read it and potentially learn something they did not know 1 minute ago.
@moregilberto4 жыл бұрын
@@RexKrueger he's sharing info. just like you. you're taking it entirely the wrong way
@BariumCobaltNitrog3n4 жыл бұрын
You are mistaking your opinion for fact, or information, as you put it. Comments are meant to be read, and responded to, especially by the creator of the video. It's really funny you tell him he doesn't have to read it, really? I don't have to read comments on my channel on my videos? Well that's a load off my mind. You're saying that plane would have been better off going through a long "laborious" process and stay rusty than clean it in a minute with a wire wheel? Rusty is better than shiny and clean. Well you have the appropriate user name, anyway. Bon chance.
@mildyproductive97264 жыл бұрын
@@BariumCobaltNitrog3n Sorry, Barium. I meant that I don't expect the creator to take the time to read and reply to me. That would be presumptuous of me. That's why there is no question in my original comment. The fact he did reply was a nice surprise. I can't seem to be able to read the last half of his original comment, but I recall him asking something... probably along the line of what was the fucking point of my comment? And since he asked, I felt compelled to respond. I'm sorry I didn't have a better answer!
@appliedclinicalvr23593 жыл бұрын
I have a bench grinder, but never bothered getting a wire wheel. I am cleaning up a no.5 Dunlap knockoff right now with a Dremel tool and abrasive wheels that have the same texture as the green scouring pads used for pots and pans. Works great! But it goes through wheels in a matter of minutes each.
@florascent9ts4 жыл бұрын
I've restored two planes with a $15 ebay diamond stone, a strop, screwdriver, a metalwork vise, and a brass cup brush in a hand drill. takes longer, but goes to show you can get great results with minimal tools. not to mention the drill is a luxury since derusting can be done with a regular brass brush
@OptimusSatanas3 жыл бұрын
Appreciate the super loud drill noise at the very beginning. Super nice.
@stevehanisch85104 жыл бұрын
Funny stuff! Hey, there are some really awesome flap wheels by 3M that you can use on a drill press now. Add a variety of small wire brushes and you don't even need a grinder for refurbishing. Just a drill press and lapping station. Way safer, and no heat problems.
@grandolddrummer3 жыл бұрын
Just restored an old Bailey no. 5 with the help of a Harbor Freight grinder. Worked great. 4 more planes to go!
@GergC05214 жыл бұрын
Love the suggestion on putting the knob in the Drill press. Pretty much a "lathe" for those of us who can't afford one.
@davidthurston33462 жыл бұрын
I dropped my grandfather's Stanley and snapped it in half. He had passed so sentiment was an issue I used a TIG and I believe some Nirod to repair it. That was over ten years ago. I have been able to get perfect service out it since. I consider myself fortunate.
@andrewrife62533 жыл бұрын
I've got two bench grinders that I picked up at a garage sale for $10 for both. If you go to a garage or barn sale make a package deal and you can get better prices on a lot of tools. My wife got a full carpenters toolbox with antique saws that are perfectly sharp and the teeth set as well as planes and a bit brace with all the bits for stupid cheap. Just remember that if you want lower cost you'll likely have to put in more work. We had to drive around and look really hard to find the deals we found but they are out there. Our biggest deal was a full commercial grade 6in jointer that we lumped in with other tools and paid 1/10th what they would go for new for everything we got. We have a full woodshop with a lathe and chisels, band saw, drill press, mitre and table saw, a huge assortment of clamps and wood saws, a jointer, and even bench grinders, a welder, and 21 boards of 1x7x12ft cherry lumber for well under $2000 total. Put in the work and you'll make a hobby out of finding and restoring the tools as you will using them
@karlrovey2 жыл бұрын
Just about the only power tool I own thanks to the previous homeowner leaving one behind. This will actually give me an idea on how to use it.
@killersugar68163 жыл бұрын
“I found it in the dumpster, so the price was right.” Sounds like Mathias...
@richardcranium50483 жыл бұрын
I look every time I take of trash. If I see something I want, I'll jump in with both feet, my wife used to make fun of me until I came home with a 50's era glider. I've rescued some pretty cool stuff from the dump. Don't get me wrong I'm far from a poor man. I just can't stand to see cool stuff die
@davidwillard73343 жыл бұрын
MORE ;! LIKE !! METAL ! SHREADDER !!
@d0ksa4 ай бұрын
Matthias Krantz?
@Th90827 Жыл бұрын
Rex - can you explain when and why to use a corrugated plane? A lot of vintage no 5s seem to be corrugated.
@markluxton3402 Жыл бұрын
I used my wire wheel to clean up my parts of a Stanly #7 I am restoring. At first I wasn't going to use the wire wheel on the plane body and chose to use fine sandpaper. I thought the wire wheel would scratch up the body too much. I would use a brass wire wheel instead but don't have one currently. I ended up using my wire wheel after seeing you use one. It did a fine job...again brass would be better. I did not remove a disk from my bench grinder. I built a purpose built wire wheel on an arbor. I geared down with pulleys running the wheel much slower and giving the smallish motor more torque. The motor may even be 1725 rpm so my wheel may be running around 1000...guessing. I find this slower speed better for restorations and rarely have wires shooting out. I am never in front of it anyway. My setup may be more dangerous as the entire wheel is exposed. This allows me to work on all sorts of things though. When I rebuild mine I aim to have two wheels attached, brass and steel, sticking out even further, and I may add two stepped pulleys so I can vary the speed. I consider a wire wheel an essential tool. I have wire brushes for variable speed angle grinder too.
@robertturbin18623 жыл бұрын
First and foremost let me start by saying, Rex your dope! With that out of the way I use the fine wheel on my grinder a lot, I hate having a grinding wheel and then a wire wheel on the other side. It'll always be off balance. Go to harbor freight and pick up two grinders for the price of one at a big box store. I keep a fine and of course wire wheel on one, and a fine and a course stone on the other. I guess it really depends on how much woodworking and metalworking you do. I probably have as many grinders as Rex has planes. Love your videos brother
@patseevers262 Жыл бұрын
Also, one of the Very few to tighten a drill chuck the proper way. Use all three !
@maineiacacres6 жыл бұрын
Had me rolling when you showed JW down on the floor. Subbed.
@Deqster4 жыл бұрын
🤣🤣🤣 I genuinely laughed out loud at that
@irishshintoshi82133 жыл бұрын
Love your example for need for bench grinder. And response I've used myself. Needed a good laugh. That gave it to me. The information is great
@worldclassish Жыл бұрын
This is very helpful if you want to review all the parts of a typical plane. And how to make it good again so thanks Rex your inspiring man.
@BeardedBadger775 жыл бұрын
I own a Central Machinery 8" grinder from Harbor Freight. I'm happy with it.
@richmorin4246 күн бұрын
Another way to tighten up the tote is to fashion a shim (e.g., from a piece of gasket material) and install it between the tote and the sole of the plane. This has the advantage of not shortening (and risking damage to) the long, difficult-to-replace, bolt.
@fmesser1005 жыл бұрын
You are a very good teacher! And like all good teachers, you are most knowledgeable. I appreciate you muting the power tool noises.
@akbychoice6 жыл бұрын
As always another great instructional video on your channel. Using a stainless steel wire wheel will help minimize rust in the future. Fine particles of stainless steel are left behind. While it isn’t like a spray arc transfer it does help. Also steel wire wheel on aluminum transfers enough steel to cause aluminum to look rusty if not protected.
@RexKrueger6 жыл бұрын
That's an amazing tip! I'm gonna get a stainless wheel. Thanks!
@jimbo26296 жыл бұрын
I flattened the sole of a new number 5 on my edge sander with an old belt. That made it functional. It shortened the flattening process by about 6 hours. I prefer wooden planes. Flattening them is a lot quicker, and the sole can be squared to the sides.
@RexKrueger6 жыл бұрын
I'm with you. I love my wooden planes, maybe even more than my metal ones. But depending on where you live, you just can't get them. I used to live in central CA and the climate was so dry the wooden planes just fell apart. The metal ones were everywhere.
@mattrickard37162 жыл бұрын
any tips on how to get the depth adjustment wheel unseized? Rather than the wheel coming off it's shaft, the whole thing unthreaded from the frog without the wheel moving at all. Being a reverse thread, I don't even have a couple of nuts to put on the end so I can grab it without destroying the threads.
@stephenbryant78732 жыл бұрын
A lot of people are commenting here about using power tools, usually negatively. I use both, but tend to get more accurate cuts with mechanical saws, not because they are powered, but because they cut straighter than I can by hand. I also prefer power drills for the same reason, although I have both, and if I'm going to put in a lot of screws, I sure appreciate the help of an electric motor. But if I have to cut on a curve, I do better by hand - a jigsaw gets away from me. And if I'm teasing a piece into proper size or shape, I do it by hand. To sum up, I use the tools that best fit my imperfect hand-eye coordination, and patience.
@B_COOPER9 ай бұрын
There is absolutely nothing wrong with power tools. Heck, even Amish folk that I’ve had the pleasure of working with are using power tools.
@mattlewandowski734 жыл бұрын
A bench grinder will create concave grinds. You can also use a belt sander (even a hand held belt sander if need be) and get flat cut at a reasonable price. Belt sanders have become the standard for knife makers. That is not to say a grinder is useless. It has it's place, but a belt sander should be looked at as a good alternative. I would like to point out that you can also get a piece of marble or granite counter top from counter installers, often fairly cheap. Ask them for scrap pieces such as cut outs or broken pieces in the size you need..
@jllaine4 жыл бұрын
"chip breaker" is actually a misnomer, though it does help push the shavings forward. It's primary job is to provide spring tension 'hold down' pressure as close to the cutting edge as possible to reduce 'chatter'. when the cutting edge moves through hard to cut grain, it gets pressed backwards, and when moving to a patch of easier to cut grain it would want to spring up like a diving board. The downward spring tension keeps it from reflexing and causing chatter. That's why its on all bevel-down planes. Remember the last time you used a razor blade scraper and you used your fingers to brace the razor blade down.
@davidrustylouis68184 жыл бұрын
yes. "chip breaker" primarily functions as a "blade/iron stiffener".....it gives the traditional irons more rigidity when contacting wood reducing the possibility for chatter
@richardsinger014 жыл бұрын
In these parts (UK) it is called the back* iron, for good reason. Edit. - I mean cap iron of course
@RickBoat6 жыл бұрын
Why oh why don't you have a lot more subscribers? Your low price tools series is wonderful
@RexKrueger6 жыл бұрын
I ask my self that same question damn near every day. You know what? Share one of my videos on your social network of choice and that will help a lot. So, so glad you enjoy these videos.
@RickBoat6 жыл бұрын
Rex Krueger done
@davidlambeth98103 жыл бұрын
“Found it in the dumpster, so the price was right” love it😂 great video! Ive been really wanting to restore some planes, but have been intimidated until this video. Time to head to an antique store and pick one up!
@PerrynBecky4 жыл бұрын
That made me laugh. "Dude, you have got to be (Bleep) kidding me". The expression on your face really made it complete too. I'm all about the KISS method too. "Keep it simple stupid". ;-)
@MichaelKloepfer685 жыл бұрын
when I sand things on a drill press I use cheap dollar store foam as a sponge behind the sandpaper to soften the sanding. or else a firm sanding sponge covered in the required sandpaper
@williamcarpenter5695 жыл бұрын
Another informative, interesting, entertaining video by The Amazing Rex K. I now acknowledge the fact I need a grinder. Thanks!
@davemartin15344 жыл бұрын
Any good machinist uses a grinder alot. Important thing is to dress the wheels to sharpen your tools. Dressing the wheels does two important things it removes imbedded steel from the wheels. And brings the grinding wheel into concentricity ( full contact on all around the wheel.) and also as a add bonus grinder will run much quieter n not vibrate. I've used other Joe's grinder and when I turned it on the wheels was so out of round that the tool bench would dance on the floor. This is bad as nobody can do a good grinding job on out of round wheels. I suggest buying a diamond stick wheel dresser, they are sold on Amazon. Base ILY it's a 1/2 inch by 5-6 inches long with a man made diamond in the end of the rod. Now u need to make a stand off for this rod dresser kind like a marking Gage. I made one out of 1 inch sq key stock about 2 inches long. . Drilled hole through it the size of the rod dresser n cross drilled and taped for a set screw to hold the diamond tiped rod steady against the grinder wheels. Now then go back n watch Rex grind that plane blade n listen to what he tells you about holding the plane blade running it from side to using his fingers against the ramp. That is what the stand off does run standoff along ramp for more accurate wheel dressing. Your tool grinding skill will increase dramaditly.
@Tool-Meister4 жыл бұрын
Good video Rex. This video kept coming up in my “recommenced” list so I gave it a watch. Good, thorough, yet concise info. Your channel is a treasure trove for any level woodworker on a budget. In fact, it’s good advise for woodworkers WITH money so with your advise, they’ll have more money for projects. Personally, I’ve spent many years using the “Ready! Fire! Aim! “ approach regarding tool shopping. I have a terrific shop full of stuff for my survivors to sort through when I’m gone. I can envision my Leigh Nelson planes all marked $10.00 ea. At the estate sale. Wish I’d met you 3 decades ago! 🤪
@David-hm9ic4 жыл бұрын
Over a long time I've watched this video several times. I bought a HF grinder cheap even though I already had another bigger grinder. I wanted more wheels available without having to change them. Glad I didn't pay full price. Compared to my late '70s Jet grinder made in Taiwan it is lackluster at best. It's only a 6" grinder and it takes a long time to spin up compared to the 8" Jet. When it's turned off, the HF stops pretty quickly. The Jet spins for a long time after it's turned off. The HF seems to lack power as well, with the 1/2 hp rating seemingly optimistic. Still the HF is infinitely better than having no bench grinder. As you said, it's plenty good for the light duty work most will do in a home shop including sharpening drill bits, deburring cut metal and the like. I did note that after using the HF for a while it seemed to break in, spinning up faster and developing more power.
@jeffbrooks9815 Жыл бұрын
Thanks Rex, I found an old baily#4 its missing the lever cap flat spring is this needed? Will be restoring for shop use
@torchmd4 жыл бұрын
I laughed so suddenly and so hard, I spit on my screen... Rex, you are my hero.
@censusgary6 жыл бұрын
Here’s another good idea- something you did, but didn’t mention. When you’re taking apart something like a plane, or anything that has 8 or more parts, make a little home video of the teardown. No, not to put it on KZbin, but so you can remember what went where when it’s time to put it back together. You think you’ll remember, but what if you don’t?
@gnarthdarkanen74645 жыл бұрын
OR... since everyone and their cousins has cellphones, and does that selfie thing... A string of photos... step by step... bolt by bolt if necessary... each part of note with a fingertip on it, or a shiny, bright pointer... take pic's. Nothing inherently wrong with video, BUT there's the temptation to PRESENT things, and it can get distracting from the actual point of the process... cataloguing the parts in order... When you're arranging the folder for the photo's, you can go by TIME stamp specifically, so you even automagically have the right order for disassembly, and by rote (usually) the order of assembly. ;o)
@chrisnorton28375 жыл бұрын
Yep. I always take a lot of photos. And sometimes I put screws on paper, circle the screws, and write a note to remind myself where they go.
@jumbo4billion5 жыл бұрын
@@chrisnorton2837 I always assume that I'll remember and invariably don't.
@VA5DGS3 жыл бұрын
That and an old trick, each part that comes off goes in a line from left to right. That way you don’t mess up the order the parts came off in.
@katana-killer15889 ай бұрын
i have a benchgrinder with a handcrank ..... best of both worlds
@safelinefleet66336 жыл бұрын
At 18:00, where you explain a trick about inserting a washer between the teeth. The teeth are made with a purpose of ensuring the rest stays at the correct angle and does not wander around with the vibrations you showed in the start of this video.The designed and correct method of adjusting to a correct angle would be to make finer adjustments with the bottom screw that holds the entire rest assembly on the grinder. The two adjustments, the toothed one and the bottom slot in tandem will easily help you set to the desired angle. Please try this instead of the washer and let me know.
@RexKrueger6 жыл бұрын
Listen man, you do it your way, and I'll do it mine. I've been doing this for years, it works great, and my tool rest stays in place just fine. In case my video doesn't make it clear, the "correct" way of doing things doesn't interest me in the slightest.
@safelinefleet66336 жыл бұрын
That wasn't courteous way of getting your thoughts across, but as you say, the 'correct" way of doing things doesn't interest you, not even in the slightest. Having known your point of view, I'll let that pass and move on to better things.
@RexKrueger6 жыл бұрын
I wasn't trying to pick a fight, but I found your comment condescending. I get why the teeth are there. They get in the way of what I'm trying to do. I've tried it the "correct" way and it didn't work. But really, no offense intended. I'm glad you watched the video.
@Victoria-jo3wr5 жыл бұрын
Man, I really wish I had seen this video when I restored my plane! It would have saved me a heck of a lot of misery. But now I know plane restoration doesn't have to be a slog, thank you!
@RexKrueger5 жыл бұрын
My pleasure!
@twoweary5 жыл бұрын
Great video as always .I really doubt that it matters if you flatten the sole under tension or not . I've seen vids on YT that show it doesn't , but I haven't tried it both ways . Always informative .
@finnhagan76645 жыл бұрын
As much as I love these videos, I really wish that they were in 720p I mean come on rex you made this video in 2017!
@RexKrueger5 жыл бұрын
Yup, and I had a crap camera. New camera=full HD.
@NJEsperantist5 жыл бұрын
Your videos are gold! I recently bought an old plane that looks very much like the one you are working on here. Just needs some TLC.
@patseevers262 Жыл бұрын
Excellent video, thank you!
@robertstigter91956 жыл бұрын
Thanks for this excellent tutorial Mr. REX. I will save this for maintenance of my old planers. Have nice weekend, rgds, Robert
@RexKrueger6 жыл бұрын
Really glad you found it useful!
@cjhification4 жыл бұрын
You could make a carriage that allows the plane to contact the wheel at a single line. Then move the carriage back and forth then move up a tiny amount, then back and forth again, then up a tiny amount. As long as the plane of the carriages movement is plainer to both the bottom of the plane and the edge of the wheel, then it should work.
@snarkfinder26213 жыл бұрын
7:35 Rex: Take all the small parts and put them in a little container so I can't lose them. Me: Take all the small parts and put them in a little container so I can knock it over and lose all of them in one go.
@huldaliljeblad36113 жыл бұрын
yeah, that's my strategy as well... always...
@Gisburne20004 жыл бұрын
At 39:10 when you said you'd look for an old craftsman at a garage sale for $20, I pictured you hauling off a sleepy, bearded old senior citizen, to be put to work in your basement 😀
@waystadtymphyndir70794 жыл бұрын
Alton Brown of woodwork. Cool show bro. Gonna go buy a grinder.
@craig96435 жыл бұрын
Best Line: 37:38 "Also... I'm just gangster" - Rex
@mikeking74704 жыл бұрын
I bought a 10.00 HF hand grinder and I have a 7-inch pre-block Craftsman that is the nuts. But I cleaned up my plane with a wire brush.